When the `finalName` parameter is incorrectly set in the Spring Boot
Maven plugin configuration instead of in the `build` configuration, the
repackaged and original archive files are not named as expected. Prior
to this commit, the image building goal would detect this error
condition and throw an exception late in the process of creating the
build container, leaving the container in an unstable state. This
commit changes the image building goal to detect this condition early,
before attempting to create the container.
Fixes gh-25590
This commit corrects the order.toml file that is generated and added
to the builder when building an image using custom buildpacks with the
Maven or Gradle plugin in order to support buildpacks that depend on
detection as a group.
Fixes gh-25378
This commit adds configuration to the Maven and Gradle plugins to
allow a list of volume mount bindings to be provided to the image
building goal and task. This enables service bindings to be mounted
in the builder image that are recognized by buildpacks to support
custom certificates, build tool configuration, APM integration, and
other buildpack features.
Fixes gh-23518
This commit adds configuration to the Maven and Gradle plugins to
allow a list of buildpacks to be provided to the image building
goal and task.
Fixes gh-21722
Update `build.gradle` files to ensure that `junit-platform-launcher` is
a `testRuntimeOnly` dependency. This ensures that tests can be run from
Eclipse.
Closes gh-25074
This commit removes the `layout` and `layoutFactory` parameters
from the `build-image` goal in the Maven plugin while retaining
them for the `repackage` goal. The `build-image` goal currently
only supports jar archives, so allowing other layout types to be
configured for the goal could cause confusion.
Fixes gh-24105
This commit sets the pull policy to `IF_NOT_PRESENT` where possible
in integration tests for the Maven and Gradle plugins to reduce
the number of times the default Paketo builder and run images are
pulled from Docker Hub.
Fixes gh-24113
A test case would fail to accurately capture the contents
of the layers.idx file unless the test project contained
at least one non-project snapshot dependency, which was only
true when the Spring Boot version was a snapshot.
See gh-23463
This commit removes `<version>` from the Maven Plugin documentation
where it makes sense so that versions aren't hardcoded unnecessarily.
Rather, a plugin or dependency management should be in place so those
are not needed.
Closes gh-23909
Previously, when building a layered jar with Maven, dependencies
on modules in the same build were treated the same as any other
dependency, being included in the dependencies or snapshot dependencies
layer based on their version.
This commit updates the default layering when using Maven to include
dependencies on modules in the same build in the application layer by
default. The XML schema has also been updated to allow the layer to be
customized using new <includeModuleDependencies/> and
<excludeModuleDependencies/> elements rather than relying on including
and excluding them via a group:artifact:version pattern.
Closes gh-23463
This commit polishes the javadoc for Maven plugin classes now that
the plugin reference docs link to the javadoc. Visibility of some
MOJO parameter class getters and setters were also changed for
consistency.
See gh-21555
This commit modifies the documentation generated for the
Maven plugin to include links to javadoc when Spring
Boot types are mentioned. Some javadoc was also polished
to improve the generated docs.
Fixes gh-21555
This commit updates the default builder image used by the Maven
and Gradle plugins image-building goal and task to use the latest
Paketo builder image. The builder image is pulled from Docker Hub
instead of Google Container Registry by default.
See gh-23628
This commit qualifies examples of configuring the CNB builder to clarify
that the examples apply to use of the default Paketo builder, and adds links
to the official Paketo docs for more details.
Fixes gh-19967
A docker registry running in testcontainers behaves
differently in CI vs running locally. Disabling the tests for
now while working on getting them running reliably in CI.
See gh-21001
This commit adds options to the Maven and Gradle plugins to publish
to a Docker registry the image generated by the image-building goal
and task.
The Docker registry auth configuration added in an earlier commit
was modified to accept separate auth configs for the builder/run
image and the generated image, since it is likely these images will
be stored in separate registries or repositories with distinct
auth required for each.
Fixes gh-21001
Previously the artifact's version was used. In an artifact's version,
SNAPSHOT is replaced with the timestamped version number of a specific
snapshot. As a result, it no longer matches the *:*:*SNAPSHOT pattern.
This commit replaces switches to using the artifact's base version.
This preserves the SNAPSHOT in the version number. For non-snapshot
artifacts, the version and base version are identical.
Fixes gh-23533
This commit adds the ability to configure the Maven and Gradle
plugins to use a remote Docker daemon using build file
configuration, as an alternative to setting environment variables
to specify remote host connection details.
Fixes gh-23400
This commit adds the ability to configure Docker image registry
authentication credentials in the Maven and Gradle plugins. The
authentication credentials are passed to the Docker daemon with
all daemon API calls, and the daemon forwards the credentials to the
image registry when necessary. This makes it possible to use
builder and run images stored in a private Docker registry.
See gh-22972
This commit updates the Maven Plugin to filter dependencies based on
the Spring-Boot-Jar-Type entry in their manifest. Jars with a
Spring-Boot-Jar-Type of dependencies-starter or annotation-processor
are excluded.
See gh-22036
Update `BuildImageMojo` so that commons HTTP wire logging is configured
to ERROR. Without this update, running `mvn -X` will produce a great
deal of logging since by default HTTP Client logs all bytes transfered
at DEBUG and Maven will enable DEBUG for all logs.
Closes gh-22674
This commit adds a pullPolicy option to the configuration of the Maven
plugin spring-boot:build-image goal and the Gradle plugin bootBuildImage
task. The new option gives users control over pulling the builder image
and run image from a remote image registry to the local Docker daemon.
See gh-22736
Previously, the Maven plugin integration tests used a settings.xml file
that defined https://repo.spring.io/snapshot as a repository. This
allowed them to resolve snapshots of the plugin's Spring Framework
dependencies but it had the unfortunate side-effect of also allowing
them to resolve snapshots of other Spring Boot modules from Artifactory
rather than using those currently being built.
This commit replaces the repositories in settings.xml with a Gradle
task that resolves the necessary dependencies and populates a local
repository with the dependencies' jars and pom files. This is achieved
using a ComponentMetadataRule that creates a custom variant of each
dependency that includes its pom file, inspired by the example in
gradle/gradle/#11449. A configuration that extends the
runtimeClasspath configuration and select the custom variant via its
attribute is then used to resolve the jars and pom files of the runtime
classpath such that they can then be used to populate the local
repository.
Closes gh-22828
Prior to this commit, an entry in the environment map provided to the
build plugin image building goal or task that had a null value would
result in a failure with a message that was difficult to diagnose.
This commit treats env map entries with a null value as an empty
entry to prevent the failure and also make it easier to provide an
explicit empty entry in the Maven XML.
Fixes gh-22703
This adds build caching and build scans.
The changes required disabling scans when using the maven invoker
plugin in order to not cause duplicate build scans when invoking other
maven builds. There is also an empty `.mvn` folder in the
spring-boot-starters project to prevent duplicate build scans as well
since there is no way to pass properties to the maven-javadoc-plugin.
The checkstyle plugin was causing a cache miss with the
`propertyExpansion` because it contains an absolute path. The absolute
path is now ignored and instead the files are added as inputs to the
checkstyle plugin. This only enables the local build cache. The remote
cache is not yet enabled.
On my local machine:
./mvnw clean install build times go from about 30 minutes to about 10 minutes.
./mvnw clean install -Pfull build times go from about 60 minutes to about 13 minutes.
See gh-22089
Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
This commit adds a runImage property to the Maven plugin build-image
goal and the Gradle bootBuildImage task. The property allows the user
to override the run image reference provided in the builder metadata
with an alternate run image. The runImage property can be specified
in the build file or on the command line.
Fixes gh-21534
This commit updates the MavenPublishingConventions to use HTTPS to
link to the Apache license. The configuration of NoHTTP has also
been reworked so that it will correctly find usch uses of http://
URLs.
Closes gh-21459
Prior to this commit, the build tool plugins set the environment
variable BP_JAVA_VERSION when invoking the CNB builder to set the
version of the JDK/JRE that the builder should use in the created
image.
With CNB API 0.3, the convention changed the name of this environment
variable to BP_JVM_VERSION. This commit updates the build tool
plugins to match the newer convention.
See gh-21273
This commit modifies the buildpack platform invocation logic used by
the build plugins to invoke the single creator lifecycle introduced in
the CNB API 0.3, instead of invoking discrete lifecycle phases
separately. It also removes support for CNB API 0.2.
Fixes gh-21273
This commit changes the default builder image from
`cloudfoundry/cnb:bionic-platform-api-0.2` to
`gcr.io/paketo-buildpacks/builder:base-platform-api-0.3`. It also
uses a `paketo-buildpacks/builder` image instead of a
`cloudfoundry/cnb` image to test compatibility with lifecycle v2
and uses paketo naming instead of cloudfoundry when mocking builder
interactions.
Some adjustments to lifecycle phases were also made to align more
closely with the pack CLI.
Fixes gh-21066
This commit adds examples for configuring the default builder to use
an HTTP/HTTPS proxy when building OCI images using the Maven or Gradle
plugin.
Fixes gh-19984
This commit moves Maven plugin content from several sections in the
main Spring Boot reference documentation to the plugin-specific
documentation.
Fixes gh-19165
Update the Maven plugin so that layered jars now use the regular "flat"
format. The layers.idx file now describes which layer each file should
be placed.
See gh-20813
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Simplify layer customization logic for both Maven and Gradle and
refactor some internals of the Gradle plugin.
Both Maven and Gradle now use a simpler customization format that
consists of `application`, `dependencies` and `layer order` sections.
The `application`, `dependencies` configurations support one or more
`into` blocks that are used to select content for a specific layer.
Closes gh-20526
This commit adds support for Cloud Native Buildpacks builder platform
API 0.3, which is the latest platform API available currently. Support
for platform API 0.1 has been removed, adopting the policy of the pack
CLI to support the current platform API version and one version prior.
Fixes gh-20757
CNB builder images are now being tagged in a manner that indicates
the version of the platform API implemented. This allows Spring Boot
to default to a builder tag that guarantees API compatibility while
allowing for updates to bundled buildpacks.
Fixes gh-20171
This commit adds documentation for the configuration required to
use a remote Docker daemon with the `build-image` Maven goal or the
`bootBuildImage` Gradle task.
See gh-20538
This commit provides a versioned xsd for the layers configuration of the
Maven plugin. The version starts at `2.3` to match with the Spring Boot
feature release in which this was introduced.
Closes gh-20663
This commit enables javadoc generator for the Spring Boot Maven plugin.
This also harmonizes the structure of the documentation, with an `/api`
and a `/reference` root directories for the javadoc and the reference
guide respectively.
Closes gh-20127
This commit adds support for setting the image name and builder
parameters of the Maven spring-boot:build-image goal using command-line
properties as an alternative to plugin configuration in pom.xml. Per
Maven conventions, a value in pom.xml configuration will override a
command-line property when both are provided.
Fixes gh-20520
This commit adds configuration to the Spring Boot Gradle plugin that
allows the names and contents of layers to be customized in the build
configuration.
Fixes gh-20296
Maven's war plugin does not support reproducible builds, resulting in
the entries in the war file not being written in a consistent order
from build to build.
Closes gh-20176
This commit adds an additional 'layers/configuration' property that can
be used to refer to a separate layers configuration file. This separate
file defines:
* The layers and their order of precedence,
* How libraries are handled using filters that match against the
coordinates of each library, and
* How classes are handled using filters that match against the location
of the entry
An XSD to validate the XML configuration file is available.
Closes gh-20295
Co-authored-by: Stephane Nicoll <snicoll@pivotal.io>
This commit fixes problems with file path separators and command
line argument quoting in Maven plug integration tests when run on
Windows.
Fixes gh-20244
With this commit, the Maven `spring-boot:build-image` goal and the
Gradle `bootBuildImage` task will configure the OpenJDK buildpack
to use the same JRE version as the project's target version,
provided the buildpack Java version is not explicitly set in the
build configuration.
Fixes gh-20172
This commit changes the order of precedence for the `arguments` property
of the AbstractRunMojo so that values specified in the POM override
values provided on the command line using `spring-boot.run.arguments`.
This brings the `arguments` property in line with all other Mojo
parameters.
Fixes gh-20024
This commit adds a `createdBy` structure to the metadata of the ephemeral
builder container image that identifies Spring Boot as the creator of the
image, along with the Spring Boot version.
See gh-20126
This commit upgrades the default CNB builder image from
cloudfoundry/cnb:0.0.43-bionic to cloudfoundry/cnb:0.0.53-bionic.
It also adds integration tests for the Maven and Gradle plugins
to verify both versions are supported.
This documentation moves the specific `build-image` execution
configuration example of the Maven plugin documentation to the general
plugin configuration. This makes sure that it works in most cases and
an execution-specific configuration is not required here anyway.
Closes gh-19946
Scott Frederick
Jurrie Overgoor
Stephane Nicoll
dreis2211
Andy Wilkinson
Scott Frederick
Mustafa Ulu
Phillip Webb
Madhura Bhave
Rob Edwards
Stephane Nicoll
Sebastian Nohn
Kedar Joshi
Johnny Lim
Emily Casey
Andy Wilkinson
姜为
anshlykov
Nelson Osacky
Kyle Hoehns
Phillip Webb