Add SharedMetadataReaderFactoryContextInitializer to ensure that a
shared caching MetadataReaderFactory is used between configuration
classes and auto-configure sorting.
Fixes gh-4993
The `DataSource` auto-configuration in Spring Boot supports two modes:
regular pooled DataSource and embedded database (via the
`EmbeddedDatabase` infrastructure provided by `spring-jdbc`. These were
previously named `NonEmbedded` and `Embedded` respectively.
This commit clarifies those mode and in particular that a pooled
`DataSource` can also handle an embedded database.
Closes gh-4634
Update `ResourceBundleCondition` to only enable the messages source
if `messages.properties` (and not `messages*.properties`) exists. This
operation is much faster that performing a pattern match since a full
jar entry scan is not required.
Since adding `messages.properties` is good practice and this change
allows us to delete the custom `PathMatchingResourcePatternResolver`
it seems like a fine compromise to make.
Fixes gh-4930
See gh-4811
When a Jersey app is deployed to a standalone container, Jersey’s
ServletContainerInitializer will run and register a servlet for a class
annotated with @ApplicationPath. If Jersey’s ServletContainerInitializer
runs before Spring’s, this servlet will take precedence over the
servlet registered by JerseyAutoConfiguration and will therefore not be
configured with any init parameters specified using spring.jersey.init
For the case where Jersey’s SCI runs first, this commit updates
JerseyAutoConfiguration to examine the servlet context for an existing
registration of Jersey’s servlet (Jersey names the registration using
the fully-qualified name of the ResourceConfig subclass). If a
registration is found its init parameters are configured using the
configuration provided by spring.jersey.init.
For the case where Spring’s SCI runs first, this commit updates
JerseyAutoConfiguration so that it names its registration using the
fully-qualified name of the ResourceConfig sub-class. This allows
Jersey’s SCI to find the existing registration rather than attempting
to configure its own.
Closes gh-2471
While Flyway's `MigrationVersion` is a String value, a simple "0" is
also a valid number. When such value is not wrapped in YAML, an integer
is injected rather than a String which leads to a failure as we can't
convert it.
This commit updates the `StringToMigrationVersionConverter` to also
supports conversion from a Number. This is a convenience for users
using YAML for configuration
Closes gh-4981
The same initializer will receive multiple ContextRefreshedEvents
when their is an application context hierarchy. This commit updates
the initializer to correctly handle multiple ContextRefreshedEvents
and only act upon the first that it receives.
See gh-4871
This commit is a continuation of the changes made in b85b608. It
addresses an additional problem when testing applications where two
contexts are refreshed in quick succession. In this scenario, it
was possible, theoretically at least, for the first context’s background preinitialization to still be in progress and creating loggers when the
second is refreshed and resets the logger context.
This commit updates BackgroundPreinitializer so that, upon receipt of
a ContextRefreshedEvent, it waits for preinitialization to have
completed. In the scenario described above, this ensures that
preinitialization has completed before the call to refresh() for the
first context returns, thereby preventing it from running in parallel
with the refresh of the second context.
Closes gh-4871
If Both Hazelcast and Hibernate are available, Spring Boot takes the
opinion that Hazelcast can be used for 2nd level caching and therefore
need to start before Hibernate.
Unfortunately, some users require Hibernate in some of their hazelcast
use case so the link is actually reversed. One way for such user is to
disable the auto-configuration that deals with this link. This class is
now public so that users can locate them and exclude them if necessary.
Closes gh-4960
Previously, BackgroundPreinitializer would kick off preinitialization
on a separate thread in response to an ApplicationStartedEvent. This
work would then race with the logging system being set up in response
to an ApplicationEnvironmentPreparedEvent. When Logback’s being used
this race is problematic. As part of Logback’s setup,
LoggerContext.stop() is called. This calls LoggerContext.reset() which
can fail with a ConcurrentModificationException if another thread tries
to create a Logger at the same time. This is a known bug in Logback [1].
This commit updates BackgroundPreinitializer to respond to
an ApplicationEnvironmentPreparedEvent and to order itself so that it’s
called after LoggingApplicationListener has responded to the same event
by initializing the logging system.
Closes gh-4871
[1] http://jira.qos.ch/browse/LOGBACK-397
Mongo’s 2.x driver allowed the credentials list to be null, however
the 3.x driver requires an empty list instead. The behaviour of the 2.x
driver is the same whether the client is created with a null credential
list or an empty credential list.
This commit aligns with the requirements of the 3.x driver by ensuring
that we never pass in a null credential list when creating the client.
Closes gh-4076
Webjars locator is a good hint that the resource chain should be
enabled. The sole presence of the library now enables the resource chain
unless the configuration states otherwise.
Closes gh-4403
Previously, MustacheViewResolver would create an InputStreamReader
that wraps the template Resource's InputStream but would fail to close
the Reader. When the InputStream was a FileInputStream, this caused
the resolver to leak file handles.
This commit updates the resolver to close the Reader once the Template
has been compiled, thereby allowing any underlying resources to be
cleaned up immediately, rather than having to wait for the JVM to exit.
Closes gh-4921
This commit completes the changes to consistently used static final
fields for Log instances that were started in ec2f33f9. Specifically it:
- Removes this. when accessing logger fields that are now static
- Renames some fields from log to logger
- Makes some logger fields static
See gh-4784
SecurityFilterAutoConfiguration uses SecurityProperties which uses
SessionCreationPolicy from spring-security-config. This commit makes
SecurityFilterAutoConfiguration conditional on SessionCreationPolicy,
thereby preventing a startup failure if spring-security-web is on the
classpath but spring-security-config is not.
Closes gh-4919
Issue #4533 was supposed to make BasicBatchConfigurer public again but
unfortunately only the class visibility was changed. This commit makes
sure it can be overridden.
Closes gh-4888
Ensure that Collections.isEmpty() is used to check if there are no
elements in a collections. This is more explicit and can be faster than
calling .size().
Closes gh-4783
Spring Data’s web support includes a handler method argument resolver,
ProxyingHandlerMethodArgumentResolver, that inaccurately claims that it
can handle all interface handler method arguments. This causes problems
for handler methods that take Spring Mobile’s Device as an argument as
the proxied Device instance does not behave correctly.
This commit works around the problem by assigning an order to the
WebMvcConfigurerAdapter that registers Spring Mobile’s argument resolver
with Spring MVC. This ordering ensures that Spring Mobile’s resolver
takes precedence over Spring Data’s for Device arguments.
Closes gh-4163
Extend ElasticsearchDataAutoConfiguration to also configure an
ElasticsearchConverter and SimpleElasticsearchMappingContext both
of which are required for Spring Data REST.
Closes gh-3847
Google App Engine probits the creation of new threads. This leads to a
failure in BackgroundPreinitializer when the single thread executor
attempts to create its single thread.
This commit enhances the existing fail safety of
BackgroundPreinitializer by catching any exceptions thrown while
creating the executor and submitting the tasks to it. Any initialisation
that has not performed in the background will be performed in the
foreground instead.
Closes gh-4662
Previously, ActiveMQ's pooled connection factory was not closed as
part of the application context being closed. This would leave
non-daemon threads running which could cause shutdown to hang unless
the JVM itself was shutting down (in which case a shutdown hook would
stop the pool).
This commit configures each pooled connection factory bean with a
custom destroy method so that the pool is stopped as part of the
application context being closed. To allow the destroy method to only
be declared when the connection factory is pooled, the bean method
has been split into two; one for pooled and one for non-pooled. This
is a partial backport of the changes made in bedf2edf.
Closes gh-4748
Add a `server.server-header` property which can be used to override the
`server` header usually sent back automatically by Tomcat/Jetty or
Undertow.
See https://www.owasp.org/index.php/Securing_tomcat for background.
Fixes gh-4461
Closes gh-4504
In bedf2edf, the return type of the auto-configuration method that
creates batch's ExitCodeGenerator was changed from ExitCodeGenerator
to JobExecutionExitCodeGenerator but the on missing bean condition
was left unchanged. This means that the auto-configured bean can
only be switched off by a JobExecutionExitCodeGenerator bean, rather
than any bean that implements ExitCodeGenerator.
This commit corrects the use of @ConditionalOnMissingBean to allow any
ExitCodeGenerator bean to switch off the auto-configured one.
Closes gh-4752
Previously, BasicErrorController would return the response status
set in the javax.servlet.error.status_code request attribute when
serving JSON but would also return a 200 OK response when serving
HTML. This didn’t cause much trouble when a person was browsing, but
proved problematic for machine clients that request text/html and care
about the response status. For example, the success handler would be
driven for an XHR request even though the response was really an error.
This commit updates BasicErrorController to set the response status for
text/html responses to match the status that it would use in an
application/json response.
Closes gh-4694
Previously, the auto-configuration for embedded Mongo did not specify
a bind IP so Mongo was started without one. This would lead to Mongo
binding to all available network interfaces. This caused some friction
with the Windows firewall as it would ask for permission every time
embedded Mongo was launched.
This commit updates the auto-configuration to use
spring.data.mongodb.host to configure the bind IP for embedded Mongo.
If spring.data.mongodb.host is null, the auto-configuration will use
the loopback address instead.
Closes gh-4630
Previously, disabling SecurityAutoConfiguration could cause
SecurityFilterAutoConfiguration to fail if Spring Security’s filter
chain bean existing in the context. SecurityFilterAutoConfiguration
relies on SecurityProperties which is created by
SecurityAutoConfiguration. When SecurityAutoConfiguration is disabled,
there’s no SecurityProperties bean so SecurityFilterAutoConfiguration
would fail due to the missing dependency.
This commit updates SecurityFilterAutoConfiguration to create a
SecurityProperties bean if one does not already exist.
Closes gh-4525
A dependency on the Servlet API (the filter's dispatcher types) causes
a failure when Spring Security is used in a non-web application.
This commit removes the dependency on javax.servlet.DispatcherType
in favour of using a Set of Strings. SecurityFilterAutoConfiguration,
which is only enabled for web applications, is the responsible for
converting each String to a DispatcherType.
Closes gh-4505
This commit adds a new property, security.filter-dispatcher-types
that can be used to configure the dispatcher types of Spring
Security's filter chain. The default remains unchanged.
Closes gh-4505
Previously, JerseyAutoConfiguration was a WebApplicationInitializer.
This was problematic as auto-configuration classes should not be ordered
(they should use AutoConfigureBefore etc instead) but the web
application initializer needs to be ordered so that it can run early and
configure Jersey before it runs.
This commit has moved the WebApplicationInitializer implementation into
a separate class so that it can be ordered independently of the
auto-configuration class. Note that the new class must be public for
the servlet container (Tomcat at least) to be able to instantiate it.
Closes gh-4527
The need to set the order of ResourceServerConfiguration was
a bad assumption. The value of the order seems strange as well
(-10), and a comment explaining it makes no sense (a resource
server normally wants its filter *after* not *before* the existing
auth server filter). Removing the bean post processor didn't
fail any tests.
In case there are multiple resource servers in the same context
there was also a problem that they ended up with the same order.
Previously, the `spring.datasource.name` property was ignored when Spring
Boot configures an embedded data source with a connection pool.
`EmbeddedDatabaseConnection` is now aligned to the purely embedded case
to take that property into account.
Closes gh-4586
The SsoSecurityConfigurer that gets added when a user has a custom
WebSecurityConfigurer with @EnableOAuth2Sso is quite opinionated, and
this is preventing users from custimizing the exception handling in the
customized UI security. This change makes it less opinionated, using
request matchers to configure the default instead of ovewriting the
single authentication entry point.
Also adds an entry point responding with a 401 for XHR clients (just like
the vanilla HTTP Basic auth).
Fixes gh-4629
Add a `spring.mvc.static-path-pattern` property which can be used to
configure the path pattern used to serve static resources.
Fixes gh-4444
Closes gh-4448
Update MongoProperties to use `MongoCredential.createCredential` rather
than `MongoCredential.createMongoCRCredential`. This allows connections
to Mongo 3.0 servers to authenticate using the SCRAM-SHA-1 mechanism.
Closes gh-4237
Make sure that the general Hazelcast auto-configuration is processed
before the cache auto-configuration. This was supposed to be fixed and
tested in 721b5a2 but unfortunately the `@AutoConfigureAfter` annotation
was placed on a regular `@Configuration` class (which has no effect).
The tests were passing because the ordering is actually hardcoded in the
test. The relevant tests now use `ImportAutoConfiguration` that simulates
the same order as the one use by the actual application.
Closes gh-4389
Commit 8e0a94f introduced a post processor that adds an explicit link
between the `HazelcastInstance` and the `EntityManagerFactory` so that
Hazelcast is fully initialized before Hibernate actually kicks in.
Unfortunately, the conditions that were implemented to register this post
processor are wrong and any app that has both JPA and Hazelcast support
blows up if no bean with name `hazelcastInstance` is defined.
This commit fixes the situation and reworks the configuration in a
separate auto-configuration that runs after the Hazelcast and JPA support
and check both the presence of an `EntityManagerFactory` and a bean of
name `hazelcastInstance`. If any of those conditions does not apply the
post processor is no longer registered.
Closes gh-4158
Add a BackgroundPreinitializer to trigger early initialization in a
background thread of time consuming tasks. By moving certain
initialization tasks to background thread and triggering them early
we can improve the critical path when the application starts. For
example, Tomcat's MBeanFactory class parses several XML files when
first loaded. If we trigger the load in a background thread it completes
before Tomcat actually needs to use it.
The initial set of initializers included with this commit are:
- Tomcat MBeanFactory
- javax.validation
- Spring's AllEncompassingFormHttpMessageConverter
See gh-4252
Allows users to configure "allowed" file extensions for controller
mappings, so that browsers will not switch to downloading "f.txt"
(part of the recent RFD attack fixes in Spring MVC).
See gh-4220
We can expect that occasionally a user clicks on a login link when
the token is expired. If the UserInfoTokenServices tries to
authenticate the user at that point, it can retain the option to
refresh the expired token if we preserve the state. Since the
state is in session scope all we need to do is to check that the
token that is being checked has the same value as the one in the
OAuth2ClientContext and re-use the context if it is.
Fixes gh-4251
Update `EnableAutoConfigurationImportSelector` to directly use the
RelaxedDataBinder when obtaining excludes. This removes the need for
the additional getProperties method on RelaxedPropertyResolver.
See gh-4352
`spring.application.exclude` is retrieved via the
`RelaxedPropertyResolver` API explicitly and it does not have any
standard API to retrieve a list of values. As a consequence that property
could only be specified as a comma-separated value.
This felt convoluted in YAML. `RelaxedPropertyResolver` has now a
`getProperties` method that works with both comma-separated value and
index elements (i.e. list).
Closes gh-4352
Previously, if security.ignored was set to none and the error controller
was disabled, there would be no paths to ignore and we would call
IgnoredRequestConfigurer.antMatchers with an empty array. While a bit
pointless, this had no effect on Spring Security’s configuration.
This behaviour has changed in the latest 4.0.3 snapshots [1]. An empty
array passed to IgnoredRequestConfigurer.antMatchers now maps to /**. As
Spring Boot configures its ignored paths with highest precedence this
means that security is now disabled for every path.
This commit updates both the management security and application
security configuration to avoid calling antMatchers with an empty
array, thereby ensuring that we don’t inadvertently ignore every path.
Even if the change to Spring Security is reverted we can keep this
change. The behaviour will remain the same and, arguably, it makes the
intent of our configuration clearer.
Closes gh-4345
[1] 8663ac4173
The PROPERTIES creator mode has the unfortunate side-effect of stopping
mixins from working. This commit updates the auto-configured module to
use the DEFAULT creator mode instead.
Closes gh-4336
Make sure that `autoApprove`, `accessTokenValiditySeconds`, and
`refreshTokenValiditySeconds` properties from the `ClientDetails`
are used
Closes gh-4306
Previously it was possible to bind a bean to the root prefix by just
adding `@EnableConfigurationProperties` with the class of said bean.
This use case is misleading and prevents any meta-data to be generated
for that object since the annotation processor reacts on the presence of
the `@ConfigurationProperties` annotation.
If a class is included in the list of configuration properties bean to
create via the `@EnableConfigurationProperties` annotation we now make
sure that the `@configurationProperties` annotation is present on it.
Closes gh-3460
We have some requirements for filter ordering:
1. The character encoding filter must go first
2. Spring Session’s filter should go early
3. RequestContextFilter should go late so that it any request wrapping
performed by other filters is reflected in the request that’s set
in the RequestContextHolder
4. Spring Security’s Filter must go after RequestContextFilter so that
any code called by Filters in Spring Security’s Filter chain can
retrieve the request from RequestContextHolder, for example
OAuth2ClientContextFilter.
See gh-4331
FacesListener in Mojarra 2.2.12 (used in Glassfish 4.1.1) is a
ServletContainerInitializer that’s annotated to handle types annotated
with javax.annotation.Resource.
OAuth2RestOperationsConfiguration.SessionScopedConfiguration is one such
class. This leads to com.sun.faces.config.DelegatingAnnotationProvider
calling getAnnotations on SessionScopedConfiguration.class. This fails
with a java.lang.ArrayStoreException due to SessionScopedConfiguration
being annotated with @ConditionalOnBean(OAuth2ClientConfiguration) and
OAuth2ClientConfiguration not being on the classpath.
DelegatingAnnotationProvider currently catches NoClassDefFoundErrors
thrown during its annotation processing. It needs to be made more
robust so that it also copes with an ArrayStoreException, in a similar
way to how org.glassfish.apf.impl.AnnotationProcessorImpl was updated to
fix GLASSFISH-21265 [1]. I’ve opened an issue to this effect [2].
In the meantime, we can work around the brittleness in
DelegatingAnnotationProvider by restructuring
SessionScopedConfiguration. This commit moves the use of @Resource into
a nested inner class, ClientContextConfiguration, while leaving the use
of @ConditionalOnBean on SessionScopedConfiguration. This means that it
is now ClientContextConfiguration that is passed to FacesListener and
processed by DelegatingAnnotationProcessor, thereby avoiding exposing
it to the @ConditionalOnBean annotation that it does not handle
gracefully. A Glassfish-based deployment test has also been added to
verify the fix.
Closes gh-2079
Closes gh-4321
[1] https://java.net/jira/browse/GLASSFISH-21265
[2] https://java.net/jira/browse/JAVASERVERFACES-4076
Add a BeanFactoryPostProcessor to set PRESERVE_TARGET_CLASS_ATTRIBUTE
to true on all ErrorController bean definitions. Without this attribute
AOP advice on @Controllers causes ErrorController beans to be created
as JDK proxies (since they implement a single valid looking interface)
and therefore not get found by Spring MVC.
Fixes gh-4236
Provide a property to customize the application path that serves as the
base URI for a JAX-RS compliant application. If both `spring.jersey.path`
and an `@ApplicationPath` are present, the property takes precedence.
Closes gh-4201
Update WebMvcAutoConfiguration to use a RequestContextFilter instead of
a RequestContextListener.
Using a filter is required for some Spring Session operations (see
https://github.com/spring-projects/spring-session/issues/129).
This update also has the added benefit of allowing the Response to be
accessed from RequestContextHolder.getRequestAttributes() by casting it
to ServletRequestAttributes.
Fixes gh-2637
Previously, HornetQ and Artemis tests were using a test configuration
class listing the configuration classes to use explicitly in the purpose
of disabling the XA support.
This had a very unfortunate side effect for Artemis as we forgot to add
an import on the "real" configuration and this got unnoticed because of
this duplication.
It turns out that this special configuration class is no longer necessary
as XA backs off automatically anyway now. The tests have been updated
to use the regular auto-configuration and were failing with Artemis. The
import has now be added.
Closes gh-4226
Previously, no `errors` attribute is made available in the standard JSON
error document if a request body object is invalid. This is due to the
fact that the framework throws a `MethodArgumentNotValidException holding
a `BindingResult` object that was not detected.
We now make sure to extract the `BindingResult` from such exception.
Closes gh-4166
Previously, SecurityFilterAutoConfiguration would be created even if
spring-security-web was not on the classpath. This didn't cause a
failure as all of its beans were disabled. It was, however, wasteful,
as the configuration class was processed and a bean created for it
unnecessarily.
This commit makes the whole class conditional on the presence of
spring-security-web so that it will be skipped entirely when the
dependency is not available.
Closes gh-4160
Update SecurityFilterAutoConfiguration to use a DelegatingFilterProxy
filter rather directly referencing the springSecurityFilterChain bean.
Using a DelegatingFilterProxy helps to prevent early initialization of
beans and makes Spring Security work in a similar to way to if were
installed in a regular WAR deployment.
Fixes gh-4154
Spring Security 4’s default configuration will, irrespective of any
other header writers that are added, enable writers for the following
headers:
- X-Content-Type
- X-XSS-Protection
- Cache-Control
- X-Frame-Options
Previously, SecurityProperties.headers used false as the default for the
properties that enable or disable these headers but the configuration is
only applied when the properties are true. This left us with the right
default behaviour (the headers are enabled) but meant that the
properties could not be used to switch off the headers.
This commit changes the defaults for the four properties to true and
updates SpringBootWebSecurityConfiguration to only apply the
configuration when the properties are false. This leaves us with the
desired defaults while allowing users to disable one or more of the
properties by setting the relevant property to false.
Closes gh-3517
The second level cache of Hibernate can be configured with dedicated
factories that look up for the presence of a cache infrastructure. As
Hibernate shouldn't have to know about Spring, that lookup is done
against the respective proprietary APIs.
We now make sure that caching (and the general purpose Hazelcast
auto-configuration) is fully processed before JPA kicks in. In particular
an explicit `dependsOn` attribute on those beans is added when they are
processed.
Closes gh-4158
When the actuator is enabled, Spring Boot provides two `MBeanExporter`
bean definitions: a general purpose one and a dedicated one for Actuator
endpoints.
This commit flag the general purpose one `@Primary` so that component
can safely inject it by type if necessary. In particular, this fix the
doc of the `JmxMetricWriter`.
Closes gh-4007
Instead of always creating a new ElasticSearch client, we now check for
the presence of a custom bean configuration and use that if it's
available.
Closes gh-4143
Closes gh-4146
Previously, if Solr 5 was on the classpath, SolrAutoConfiguration
would fail with a rather cryptic error message due to a change in the
inheritance hierarchy of CloudSolrServer between Solr 4 and Solr 5.
This commit updates SolrAutoConfiguration to be conditional on a
class that exists in Solr 4 but was removed in Solr 5. This has the
effect of switching off the auto-configuration when Solr 5 is on
the classpath, allowing the auto-configuration report to be used to
identify why the configuration was disabled. The documentation has
also been updated to state that Spring Boot does not currently support
Solr 5.0.
Closes gh-2795
Default will extract an "authorities" key from the map coming from the
server. No existing servers I am aware of actually send that data, but
it might be helpful as a default nevertheless. User can override the
default by adding a bean of that type.
Fixes gh-3711
The latest Spring Framework 4.2.2 snapshots have reworked
EventListenerMethodProcessor so that it no longer queries a proxies
target class. Previously, when this was happening, it happened early
in the context's lifecycle when the bean's concrete type was unknown.
The led to the target class being set as the proxied interface.
With the latest 4.2.2 snapshots, the first call to
AopUtils.getTargetClass() happens in the test, by which time the
actual concrete type of the bean is known. This commit updates the
test so that its expectations match the more precise result.
ClassUtils.isPresent(String, ClassLoader) swallows all Throwables when
trying to load a class by name. For this reason
UnsupportedClassVersionError will also be swallowed when user code is
trying to use a driver library which has been compiled with a later
JDK than the one the application is running with. All the user would
see was "Cannot load driver class". This change simply propagates the
UnsupportedClassVersionNumberError so that it is easier for users to
find the root cause of the problem.
Closes gh-4082
Closes gh-4091
If a DataSource class is found in the classpath then
EmbeddedDataSourceConfiguration will not be used, so the in-memory
database will not be shutdown on application context closing.
As a result, unnecessary database initialization may cause subsequent
tests to fail, for example see [1].
[1] https://github.com/spring-projects/spring-boot/issues/1712
Previously, if an application used JPA and declared its own Flyway bean,
startup would fail. The custom Flyway bean would switch off
auto-configuration of the FlywayMigrationInitializer bean but the
context’s entity manager factory beans would still be configured to
depend on the migration initialiser.
This commit splits the post-processor that configures the dependencies
into two. One that configures the dependency on the Flyway bean and
one that configures the dependency on the FlywayMigrationInitializer
bean. When to auto-configuration of the FlywayMigrationInitializer is
switched off, the auto-configuration of the latter dependency is also
switched off.
Closes gh-4079
For reasons I don't (yet?) understand, shutting down the databases
proactively triggers a StackOverflowError in Jersey. Reverting the
change while I try to figure out what's going in.
Update all TemplateAvailabilityProvider implementations to use the
relaxed property binder. Also fix FreeMarkerTemplateAvailabilityProvider
to use `template-loader-path` rather than `path`.
Fixes gh-4085
Update the logged auto-configuration report so that each line includes
"matched", "did not match" text. This helps when looking to see if a
specific auto-configuration class was applied or not.
Fixes gh-4084
This commit updates ConditionalOnJava to remove a dependency on the
deprecated JdkVersion API from Spring Framework. In its place it now
looks for the presence of certain classes to determine the version of
Java on which its running.
Closes gh-4005
Previously `spring.velocity.charset` only controlled the output encoding
with the templates being loaded with the default encoding. We now
consistently set the same value for both the input and output encodings.
It is still possible to override it to a different value using
`spring.velocity.properties.input.encoding`
Closes gh-3994
Previously `spring.velocity.charset` only controlled the output encoding
with the templates being loaded with the default encoding. We now
consistently set the same value for both the input and output encodings.
It is still possible to override it to a different value using
`spring.velocity.properties.input.encoding`
Closes gh-3994
Update `ServerProperties` to automatically enable `use-forward-headers`
when running on a cloud platform.
A new `CloudPlatform` enum has been introduced that detects Heroku and
Cloud Foundry.
See gh-4018
Add a new `server.use-forward-headers` property which can be used to
switch on X-Forwarded-For header support in all supported embedded
servlet containers.
This commit reverts the decision to enable `RemoteIpValve` with Tomcat
by default (gh-3782) and requires that either `user-forward-headers` is
set to true or that `server.tomcat.protocol-header` or
`server.tomcat.remote-ip-header` are set.
See gh-4018
See gh-3782
In order to have more control on the structure of the configuration, we
do not bind to `RepositoryRestConfiguration` directly anymore. This
commit introduces `RepositoryProperties` instead.
See gh-3854
Closes gh-4073
This commit adds auto-configuration support for WebSocket-based
messaging. When the user enables WebSocket messaging (typically via
@EnableWebSocket and @EnableWebSocketMessageBroker) and an ObjectMapper
bean exists, a MappingJackson2MessageConverter that uses the
ObjectMapper will be configured. This causes any spring.jackson.*
configuration to affect WebSocket message conversion in the same way
as it affects HTTP message conversion.
Closes gh-2445
Add `error.include-stacktrace` configuration option to determine when
stack trace attributes should be added. Options are `never`, `always`
or `on-trace-param`.
Prior to this commit stacktrace attributes were never includes in HTML
responses, and only included in JSON responses when a `trace` request
parameter was set to `true`. This has now been changed so that,
by default, stacktrace attributes are never included.
The BasicErrorController includes a protected method that can be
overridden if includes should be different depending on the `produces`
mapping.
Closes gh-2371
This commit simplifies the Jackson-related auto-configuration that’s
applied when Spring HATEOAS and Spring Data REST are on the classpath.
Previously, Boot used Jackson2HalModule to apply the HAL-related
ObjectMapper configuration to the context’s primary ObjectMapper. This
was to allow HAL-formatted responses to be sent for requests accepted
application/json (see gh-2147). This had the unwanted side-effect of
polluting the primary ObjectMapper with HAL-specific functionality.
Furthermore, Jackson2HalModule is an internal of Spring HATEOAS that
@olivergierke has asked us to avoid using.
This commit replaces the use of Jackson2HalModule with a new approach.
Now, the message converters of any RequestMappingHandlerAdapter beans
are examined and any TypeConstrainedMappingJackson2HttpMessageConverter
instances are modified to support application/json in addition to their
default support for application/hal+json. This behaviour can be disabled
by setting spring.hateoas.use-hal-as-default-json-media-type to false.
This property is named after Spring Data REST’s configuration option
which has the same effect when using Spring Data REST. The new property
replaces the old spring.hateoas.apply-to-primary-object-mapper property.
Previously, when Spring Data REST was on the classpath,
JacksonAutoConfiguration would be switched off resulting in the context
containing multiple ObjectMappers, none of which was primary.
This commit configures RepositoryRestMvcAutoConfiguration to run after
JacksonAutoConfiguration. This gives the latter a chance to create its
primary ObjectMapper before the former adds its ObjectMapper beans to
the context.
Previously, the actuator’s hypermedia support assumed that the
HttpMessageConverters bean would contain every HttpMessageConverter
being used by Spring MVC. When Spring HATEOAS is on the classpath this
isn’t the case as it post-processes RequestMappingHandlerAdapter beans
and adds a TypeConstrainedMappingJackson2HttpMessageConverter to them.
This wasn’t a problem in the past as the primary ObjectMapper, used by a
vanilla MappingJackson2HttpMessageConverter, was configured with Spring
HATEOAS’sJackson2HalModule. Now that this pollution has been tidied up
the assumption described above no longer holds true. MvcEndpointAdvice,
which adds links to the actuator’s json responses, has been updated
to look at the HttpMessageConverters of every
RequestMappingHandlerAdapter when it’s trying to find a converter to
use to write a response with additional hypermedia links.
Integration tests have been added to spring-boot-actuator to ensure
that the changes described above have not regressed the ability to
configure its json output using spring.jackson.* properties (see
gh-1729).
Closes gh-3891
Update DataSourceProperties exceptions to include a less misleading
message. Errors message now note that you may need to add an embedded
database to the classpath or active a profile to pickup specific
settings.
Fixes gh-4012
Relocate several auto-configuration classes to `...autoconfigure.data`
to make it clearer that they are Spring Data specific.
Also moved `EntityManagerFactoryBuilder` to `spring-boot` since it is
generally useful and doesn't need to be directly tied to the
auto-configuration module.
Fixes gh-4002
The parameter names module allows users of Java 8 that have compiled
their code with the -parameters option to avoid the name for
annotations to map the json onto constructor and method parameters
with the names of the parameters being used instead.
This commit adds auto-configuration for the module that will only
be enabled when running on Java 8.
Closes gh-3804
For the character encoding filter to work, it's vital that it sets
the request's encoding before any other filters attempt to read the
request. This commit updates the order of
OrderedCharacterEncodingFilter to be HIGHEST_PRECEDENCE and improves
the existing test to check that the ordering is as required.
Closes gh-3912
- Rename local variable to avoid shadowing field with the same name
- Add a test to verify that local.mongo.port is set on the parent
context
Closes gh-3955
Previously, a StackOverflowError would occur when using a random port
for embedded mongo as the logic for propagating the property up the
context hierarchy would repeatedly use the leaf context's parent.
This commit updates the logic to look to see if the current context
has a parent, only calling the method again if it does.
Closes gh-3956
Update HibernateJpaAutoConfiguration to catch LinkageError rather than
NoClassDefFoundError. Required due to the fact that JBoss EAP 6 wraps
NoClassDefFoundErrors.
Fixes gh-3605
Since the meta-data now provide an explicit support for value hints, we
should not copy/paste them in the description as the IDE is able to
process them any way it wants.
Closes gh-3863
All the filters added explicitly by Spring Boot now have order <=
FilterRegistrationBean.REQUEST_WRAPPER_FILTER_MAX_ORDER (value 0).
There is nothing we can do about the DispatcherServlet and anything
else downstream of the filter chain.
Fixes gh-3613
Spring HATEOAS 0.19.0.RELEASE provide support for resolving a link’s
title by looking up the key _links.$rel.title. For us to take advantage
of this in Spring Boot, HalHandlerInstantiator must be created using
the link relation message source that’s automatically created by
HateoasConfiguration.
Closes gh-3860
Add aliases for `@ComponentScan`attributes on `@SpringBootApplication`
so that it is possible to customize how the component scan should be
applied on the project.
Previously, one would have to revert to `@EnableAutoConfiguration` to
achieve the same result.
Closes gh-3368
Provide a general purpose Hazelcast integration (i.e. not tied to caching).
Auto-configure a `HazelcastInstance` either based on the presence of a
`Config` bean or a configuration file. Said configuration file can be
specified explicitly or automatically found from default locations.
The cache integration already supports Hazelcast so it has been reworked
to automatically reuse an existing `HazelcastInstance` if available.
Closes gh-2942
This commit ensures that even when a user specifies a
WebSecurityConfiguration that the order of Spring Security's Filter
is still configured.
Closes gh-3824
See gh-3703
Spring MVC requires all handlers for the same path to be on the same handler
so if anyone wants to add new handlers for different content types they
have to copy a lot of code from BasicErrorController. This change increases
the visibility of the basic utility methods in BasicErrorController so that
custom handlers can be added easily.
Fixes gh-3828
Previously, native cache libraries were favored over a standard JSR-107
implementation. If a user has a working setup using JCache with one
provider and switch to another provider, his setup may be broken if we
happen to provide a native support for the new provider.
We now consistently favor JSR-107 if it is present. Native support can
still be enabled via the `spring.cache.type` property.
Closes gh-3822
Previously we had to create a fake Properties object as the factory did
not provide individual setters for the SSL configuration. This has been
added as part of Spring AMQP 1.5.0.RC1 so we're using those instead.
Closes gh-3754
Previously, `ResourceUrlEncodingFilter` was registered even if the
resource chain handling was disabled (which is the default).
We now take care of registering it only if the resource chain handling is
enabled.
Closes gh-3353
Given that Spring Boot uses java config accross the board, a new `value`
attribute is now aliased to the existing `classes` attribute such that
one could write the following:
@SpringApplicationConfiguration(MyConfig.class)
public class MyTest {}
Closes gh-3635
The `spring.datasource.name` property was hidden behind the 'name'
attribute of the Tomcat connection pool (since we are mapping all
datasource implementations on the `spring.datasource` namespace.
This commit replace the injected value by hand with the use of the
regular `DataSourceProperties`. That way, we generate proper meta-data
for it as well.
Closes gh-3755
A new `spring.datasource.type` property can now be used to configure the
connection pool implementation to use (rather than only relying on Boot's
preferences).
Closes gh-3705
Previously, to use a custom ConfigurableWebBindingInitializer, it was
necessary to extend WebMvcConfigurationSupport and override
getConfigurableWebBindingInitializer. This had the unwanted
side-effect of switching off the auto-configuration of Spring MVC.
This commit updates the auto-configuration to look for a
ConfigurableWebBindingInitializer bean and register it with Spring
MVC.
Closes gh-2526
Add a new `@ImportAutoConfiguration` annotation that can be used by
tests that wish to selectively import certain auto-configuration
classes. Also add `@AutoConfigurationPackage` so that package
registration is decoupled from `@EnableAutoConfiguration`.
An added benefit of the change is @EnableAutoConfigurationImportSelector
can now be subclassed to provide custom annotation support if needed.
Fixes gh-3660
See gh-2772
Harmonize the configuration properties for Undertow to match the changes
made for gh-2491.
Move `spring.undertow.accessLog*` to `spring.undertow.accesslog.*`
Add `directory`, `prefix` and `suffix` properties to further customize
how access logs are configured on Tomcat. Relocate all properties to the
`server.tomcat.accesslog` namespace.
`server.tomcat.accessLogPattern` and `server.tomcat.accessLogEnabled` are
deprecated and replaced by `server.tomcat.accesslog.pattern` and
`server.tomcat.accesslog.enabled` respectively.
Closes gh-2491
Three conditions must be met for the console to be enabled:
- H2 is on the classpath
- The application is a web application
- spring.h2.console.enabled is set to true
If spring-boot-devtools is on the classpath, spring.h2.console.enabled
will be set to true automatically. Without the dev tools, the enabled
property will have to be set to true in application.properties.
By default, the console is available at /h2-console. This can be
configured via the spring.h2.console.path property. The value of this
property must begin with a '/'.
When Spring Security is on the classpath the console will be secured
based on the user's security.* configuration. When the console is
secured, CSRF protection is disabled and frame options is set to
SAMEORIGIN for its path. Both settings are required in order for the
console to function.
Closes gh-766
Update the `@EnableAutoConfiguration` annotation to include an `include`
attribute which can be used to specify specific auto-configuration
classes.
Primarily added to so that tests can selectively auto-configure without
needing to worry about class import order.
Fixes gh-3660
Add an auto-configuration that avoid a Spring Boot user to add
`@EnableConfigurationProperties` to its configuration to benefit from
that feature.
As our own auto-configurations are tested independently, such annotation
is still present to avoid a useless reference to this new
auto-configuration.
Closes gh-2457
Previously, BeanTypeRegistry would only look for a @Bean method
with no arguments when trying to determine the type that will be
created by a factory bean. This meant that the type produced by a
factory bean declared via a @Bean that has one or more arguments would
be unknown and any on missing bean conditions look for a bean of the
type produced by the factory bean would match in error.
This commit updates BeanTypeRegistry to, where possible, use the
factory method metadata for the bean definition when determining the
type that will be created. This allows it to determine the type for
factory bean created by @Bean methods that take arguments and also
avoids the use reflection to find the factory method. Where factory
method metadata is not available, the existing reflection-based
approach is used as a fallback.
Closes gh-3657
Add `spring.autoconfigure.exclude` to control the list of
auto-configuration classes to exclude via configuration. Merge the
exclusions defined on the `@EnableAutoConfiguration` or
`@SpringBooApplication` if any.
Closes gh-2435
Currently, the default TemplateResolver had no specific order. Thymeleaf
handles that with a "always first" strategy (that can be confusing if
several TemplateResolver have a "null" order.
While it is a fine default (and changing it could lead to weird side
effects), it has to be changed as soon as another TemplateResolver bean
is defined in the project.
The `spring.thymeleaf.template-resolver-order` property has been added to
control the order of the default TemplateResolver.
Closes gh-3575
Allow to disable the auto-startup flag of the default JMS and RabbitMQ
containers. This effectively permit to disable automatic listening via
configuration.
Closes gh-3587
While the doc states that the default value is '/', setting that value
explicitly will lead to an error since we enforce that the default root
is the empty string.
Changing the doc will probably be more confusing than anything else so
we're now cleaning the user's provided value if necessary
Closes gh-3554
This commit adds a new "Unconditional classes" section to the
auto-configuration report. It lists any auto-configuration classes
that do not have any class-level conditions, i.e. the class will be
always be part of the application's configuration.
Closes gh-2209
A RepositoryRestMvcConfiguration subclass provided by a user is
problematic in a Spring Boot application as it causes
RepositoryRestMvcConfiguration's bean declarations to be processed
before any auto-configuration runs.
One problem that this causes is that it switches off Boot's Jackson
auto-configuration due to RepositoryRestMvcConfiguration having
already declared multiple ObjectMapper beans. Unlike Boot's
auto-configured ObjectMapper, none of these ObjectMappers are marked
as @Primary. This then leads to wiring failures due to multiple
candidates being available.
To address this problem a new RepositoryRestConfigurer abstract has been
introduced in Spring Data Gosling. Its use is now strongly preferred
over subclassing RepositoryRestMvcConfiguration. Note that our own
RepositoryRestMvcConfiguration subclass remains. It is imported as part
of auto-configuration (avoiding the ordering problems described above),
and provides configuration properties binding for
RepositoryRestConfiguration. However, the Jackson ObjectMapper
configuration has been moved out into a new RepositoryRestConfigurer
implementation.
While SpringBootRepositoryRestMvcConfiguration remains, this commit
makes it package private to discourage users from subclassing it. While
this may break existing applications, it, coupled with the documentation
updates, will hopefully guide them toward using
RepositoryRestConfigurer.
Closes gh-3439
It has to come after MongoDataAutoConfiguration (not
MongoAutoConfiguration) because it looks for beans that are defined
there (e.g. MongoMappingContext which is the one that scans for entities).
Fixes gh-3577
Also copies the ExpressionParser (the only public getter), trust
resolver and permission evaluator (if available in the context). Changes
the logic to not replace an existing OAuth2MethodSecurityExpressionHandler
so that users can override simply by providing a bean of that type.
Fixes gh-3542
Restore the deprecated method to give people a change to migrate. The
@DeprecatedConfigurationProperties annotation is now used to generate
the deprecated meta-data, removing the need for manual meta-data.
Closes gh-3537
Update Tomcat, Jetty and Undertow to serialize session data when the
application is stopped and load it again when the application restarts.
Persistent session are opt-in; either by setting `persistentSession`
on the ConfigurableEmbeddedServletContainer or by using the property
`server.session.persistent=true`.
Fixes gh-2490
Previously, the prefix was spring.embedded-mongodb. This was
inconsistent with the prefixes for Artermis and HornetQ which are
spring.artemis.embedded and spring.hornetq.embedded respectively.
See gh-2002
Embedded MongoDB is now auto-configured when it is on the classpath.
The Mongo instance will listen on the port specified by the
spring.data.mongodb.port property. If this property has a value of
zero and randomly allocated port will be used. In such an event, the
MongoClient created by MongoAutoConfiguration will be automatically
configured to use the port that was allocated.
By default, MongoDB 2.6.10 will be used. This can be configured using
the spring.embedded-mongodb.version property. Mongo's sync delay
feature is enabled by default. This can be configured using the
spring.embedded-mongobd.features property.
Closes gh-2002
Phillip Webb
Stephane Nicoll
Patrick Bray
Eddú Meléndez
Huang YunKun
mnhock
Johnny Lim
Spring Buildmaster
Jacques-Etienne Beaudet
Andy Wilkinson
Kirill Vlasov
Jacob Swanson
Artur Konczak
Dave Syer
Jean de Klerk
cornelcreanga@yahoo.com
Bohuslav Burghardt
awgtek
Kyle Lieber
Vedran Pavic
Marten Deinum
Benedikt Ritter
Alexander Tokarev
mackeprm
Michael Stummvoll
Julien Dubois
Fabricio Colombo
Paweł Doleciński
Pei-Tang Huang
james
Barry Lagerweij
Rob Winch
madorb
Eric Fenderbosch
Martin Lippert
Joao Pedro Evangelista
Eric Bottard
jhernan
Johannes Stelzer