Create a new `JarFileWrapper` class so that we can wrap and existing
`JarFile` and offer a version that can be safely closed.
Prior to this commit, we provided wrapper functionality in the `JarFile`
class itself. Unfortunately, because we override `close` and also create
a lot of wrappers this caused memory issues when running on Java 11.
With Java 11 `java.util.zip.ZipFile` class uses `FinalizableResource`
for any implementation that overrides `close()`. This means that any
wrapper classes will not be garbage collected until the JVM finalizer
thread runs.
Closes gh-22991
This adds build caching and build scans.
The changes required disabling scans when using the maven invoker
plugin in order to not cause duplicate build scans when invoking other
maven builds. There is also an empty `.mvn` folder in the
spring-boot-starters project to prevent duplicate build scans as well
since there is no way to pass properties to the maven-javadoc-plugin.
The checkstyle plugin was causing a cache miss with the
`propertyExpansion` because it contains an absolute path. The absolute
path is now ignored and instead the files are added as inputs to the
checkstyle plugin. This only enables the local build cache. The remote
cache is not yet enabled.
On my local machine:
./mvnw clean install build times go from about 30 minutes to about 10 minutes.
./mvnw clean install -Pfull build times go from about 60 minutes to about 13 minutes.
See gh-22089
Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
Update `LaunchedURLClassLoader` so that packages defined from exploded
archive folders have manifest attributes applied to them. Prior to this
calling `package.getImplementationTitle()` would only return the a
manifiest attribute when running non-exploded.
The root cause of this issue is the way that `URLClassLoader` handles
the different URL types. For URLs that reference a jar the manifest is
available. For URLs that reference a folder it isn't. When running
exploded we use a URL that references to the `BOOT-INF/classes` folder
directly. To fix the issue we now attempt to detect when `definePackage`
is being called directly, and replace `null` entries with actual
manifest values.
Fixes gh-21705
Update `JarFile` so that `super.close()` is called early so that the
file is not left open. Since we re-implement `JarFile` methods to work
directly on the underlying `RandomAccessDataFile`, it should be safe
to close immediately.
Closes gh-21177
Update `JarFile` so that `super.close()` is called early so that the
file is not left open. Since we re-implement `JarFile` methods to work
directly on the underlying `RandomAccessDataFile`, it should be safe
to close immediately.
See gh-21126
Update `JarURLConnection` to ensure that when connections are opened
a new copy of the JarFile is provided.
Prior to this commit, a single `JarFile` instance was shared which meant
that it could be accidental closed if accessed via
`JarURLConnection.getJarFile()`. If the underlying jar file is closed
then it's possible for a `NoClassDefFoundError` to be thrown if running
on JDK 11 with an active `SecurityManager`.
Closes gh-17796
ExecutableArchiveLauncher.createClassLoader(Iterator) calls
createClassLoader(URL) method with 'super'. This means overriding
createClassLoader(URL) is not possible without also overriding
createClassLoader(Iterator). The switch to 'this' enables that.
See gh-20851
Update the Maven plugin so that layered jars now use the regular "flat"
format. The layers.idx file now describes which layer each file should
be placed.
See gh-20813
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Update `LaunchedURLClassLoader` to ensure that the `JarModeLauncher`
is created in the correct classloader.
Prior to this commit the launcher was created by the application
classloader and did not have access to any of the required
`org.springframework` classes.
See gh-19848
Update all dependencies declarations to use the form `scope(reference)`
rather than `scope reference`.
Prior to this commit we declared dependencies without parentheses unless
we were forced to add them due to an `exclude`.
Replace Gradle single quote strings with the double quote form
whenever possible. The change helps to being consistency to the
dependencies section where mostly single quotes were used, but
occasionally double quotes were required due to `${}` references.
Fix a bug in `ExplodedURLClassLoader` and merge the code into the
existing `LaunchedURLClassLoader` class. Also polish a few method
names relating to layer support.
See gh-19848
See gh-19767
Update the `Launcher` class to allow a packaged jar to be launched in
a different mode. The launcher now checks for a `jarmode` property and
attempts to find a `JarMode` implementation using the standard
`spring.factories` mechanism.
Closes gh-19848
Support an alternative fat jar format that is more amenable to Docker
image layers.
The new format arranges files in the following structure:
BOOT-INF/
layers/
<layer-name #1>
/classes
/lib
<layer-name #2>
/classes
/lib
The `BOOT-INF/layers.idx` file provides the names of the layers and the
order in which they should be added (starting with the least changed).
The `JarLauncher` class can load layered jars in both fat and exploded
forms.
Closes gh-19767
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Update the `Repackager` class so that an additional `classpath.idx` file
is written into the jar that provides the original order of the
classpath. The `JarLauncher` class now uses this file when running as
an exploded archive to ensure that the classpath order is the same as
when running from the far jar.
Closes gh-9128
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
The JarFile was not being closed which linked a file handle and caused
a test failure on Windows.
The local variable has been renamed as, when declared in a
try-with-resources, Checkstyle was confused by the shadowing of the
jarFile field and required references to jarFile within the try-block
the be prefixed with this.
See gh-19595
This paves the way for publishing Gradle module metadata once the
problem caused by snapshot versions and our two-step publication
process has been addressed.
See gh-19609
This reverts commit b34a311d02 as,
having disabled the publishing of Gradle's module metadata (4f75ab5),
the changes are no longer needed.
See gh-19609
Previously, enforcedPlatform dependencies were using to pull in the
constraints defined in spring-boot-dependencies and
spring-boot-parent and applied them strictly so that the constrained
version had to be used. This worked as intended in Spring Boot's own
build but incorrectly enforced those same strict version requirements
on external consumers of Spring Boot's modules.
This commit reworks how Spring Boot defines its internal dependency
management so that platform dependencies are exposed to external
consumers while enforced platform dependencies are using internally.
See gh-19609
- Previously, we would create a JarFileArchive for all nested jars.
This was an additional overhead. We only need to create a JarFileArchive
for jars that can have nested jars in them. For all other jars we only need
the URL to build the classpath.
- While iterating over nested entries in the exploded jar, we only need to
look at BOOT-INF and we can skip any entry that does not match that.
Closes gh-16655
Co-authored-by: Phillip Webb <pwebb@pivotal.io>
Previously, Maven's default behaviour was relied up which resulted
in the artifact ID being appended to each URL as it was inherited.
This behaviour can only be disabled in Maven 3.6 and later, a version
that we cannot use due to an incompatibility with the Flatten Plugin.
This commit works around Maven's default behaviour by defining
properties for the SCM URL, connection, and developer connection and
then explicitly defining the settings in each pom using these
properties. The explicit definition of the properties in each pom
prevents them being inherited from the parent, thereby disabling the
unwanted appending of the artifact ID to the URL.
Fixes gh-18328
Previously, calling getComment() on a nested jar file would result
in the outer jar file's comment being returned.
This commit updates the loader's JarFile to read the file's comment
from the central directory end record and return it from getComment().
Fixes gh-18128
Phillip Webb
Stephane Nicoll
Andy Wilkinson
Nelson Osacky
dreis2211
Madhura Bhave
Phillip Webb
Johnny Lim
Konrado85
Oleg Zhurakousky
zhangt2333
Dmytro Nosan
Camille Vienot
thelproad