Replace the MVC validator post processor with an `@Import` so
that a "cannot enhance @Configuration bean definition"
warning does not occur.
Fixes gh-8951
See gh-8495
Update `PropertiesLauncher` so that classes can be loaded outside of
`BOOT-INF/classes`. You can use a subdirectory, or the root directory
of an external jar (but not the parent archive to avoid issues
with agents and awkward delegation models).
Fixes gh-8480
Closes gh-8486
Relax `SpringBootTestContextBootstrapper` rules so that a test can
specify an `ApplicationContextInitializer` and still have
`@SpringBootConfiguration` detected.
Prior to this commit detection would not occur because it's possible
that an initializer _could_ register configuration. This scenario is
actually quite unlikely to occur, certainly less likely than wanting to
use an initializer in combination with auto-detection.
Fixes gh-8483
Update `ValidationAutoConfiguration` and `WebMvcAutoConfiguration` to
ensure as much as possible that only a single Validator bean of each
type is registered.
Validation auto-configuration now does the following:
- If no validator is found: Registers a `LocalValidatorFactoryBean`
(providing both Spring and JSR validation)
- If the user defines a Spring & JSR validator: Backs off
- If the user defines only a JSR validator: Adapts it to a Spring
validator (without exposing another JSR implementation)
WebMvcAutoConfiguration auto-configuration has been updated to make
MVC validation follow common Spring Boot patterns:
- If not validator beans are found (due to the user excluding
ValidationAutoConfiguration) a new `mvcValidator` bean will be
registered.
- If a single validator bean is found it will be used for MVC
validation.
- If multiple validator beans are defined it will either use the one
named `mvcValidator` or it will register a new `mvcValidator` bean
Any automatically registered `mvcValidator` bean will not implement
the JSR validator interface.
Finally, it is no longer possible to provide an MVC validator via a
`WebMvcConfigurer`.
Fixes gh-8495
Allow `PathExtensionContentNegotiationStrategy` to be bypassed by
actuator endpoints. Prior to this commit calling `/loggers/com.aaa.cab`
would return a HTTP 406 response due to `.cab` being a known extension.
Fixes gh-8765
Update `ResourceServerTokenServicesConfiguration` to fail fast if the
`getKeyFromServer()` call fails. Since the key is part of the singleton
`JwtAccessTokenConverter` bean there is not real way to refresh without
restarting the application.
A hard failure seems preferable to an inconsistent state.
Closes gh-8924
Since SPR-15415 and SPR-15435, the HandlerStrategies and its companion
builder are now using the new CodecConfigurer infrastructure to
configure codecs in a cross-cutting way.
This commit looks for a custom instance of `HandlerStrategies.Builder`
provided by the user, or create a default one if none was found.
Fixes gh-8897
This commit makes sure to honour the `spring.aop.proxy-target-class`
property if set by the user. Previously, the
`PersistenceExceptionTranslationPostProcessor` was always configured to
use cglib, regardless of the value of that property.
Closes gh-8887
This commit separates the JPA-specific bits of the batch
auto-configuration so that it is possible to reuse most of the logic if
JPA isn't available at all.
Closes gh-8877
This commit makes sure to honour the `spring.aop.proxy-target-class`
property if set by the user. Previously, the
`MethodValidationPostProcessor` was always configured to use cglib,
regardless of the value of that property.
Closes gh-8869
Previously, as a result of the changes made in de50cfa21e, an
application would fail to start on Google AppEngine as it prevents
the creation of new threads.
This commit updates OnClassCondition so that it falls back to
performing the work on the main thread when its unable to shift it
to a separate thread.
Closes gh-8584
When used as a meta-annotation the value() attribute of
@ConditionalOnClass will fail silently resulting in the @Conditional
nature of the annotation being ignored.
See gh-8185
Previously, WelcomePageHandlerMapping would forward to index.html.
This assumed that the static path pattern was always /**. If it had
been customised to, for example, /foo/**, then the forward would still
be to index.html and a 404 would result as the page is actually
available at /foo/index.html.
At first glance, it would appear that the forward should be made to
foo/index.html. However, as it's a forward rather than a redirect,
any relative URLs in the index.html page would then be resolved using
/ whereas they should be resolved using /foo/. This could be addressed
by using a redirect rather than a forward, but we don't want to do
that as it's more invasive and would require a roundtrip back to the
client. Instead, this commit simply stops performing the forward when
the static path pattern is not /**.
Closes gh-8788
This commit makes sure that `@EnableTransactionManagement` is
auto-configured with Neo4j. It actually reuses what was done in #8434,
making sure that the `Neo4jDataAutoConfiguration` is ordered properly.
Closes gh-8587
Previously to this commit, transaction management was only enabled when
a `DataSource` is configured. The processing of `@Transactional`
annotations are now enabled as long as a `PlatformTransactionManager` is
present.
Also, the `spring.aop.proxy-target-class` is now honoured if set, still
defaulting to CGLIB mode.
Closes gh-8434
As part of the upgrade, this commit removes the use of any API that
has been deprecated in 2.9. This includes the config props endpoint's
use of SerializationFeature.WRITE_NULL_MAP_VALUES. This has been
replaced with configuring serialization inclusion to only include
properties with non-null values. This means that all null-valued
properties will no longer be serialized, not just those that are an
entry in a map.
Closes gh-8604
Closes gh-8537
Closes gh-7695
This commit our Neo4j OGM dependency with the Spring Data Neo4j
snapshots that are currently included in snapshots of Spring Data Kay.
It switches to using Neo4j's Bolt driver by default, aligning it with
the default of the latest Spring Data Neo4j 5 snapshots.
It also contains a workaround for a Neo4j OGM issue [1] and a change
to Neo4jDataAutoConfigurationTests that prevents the entire classpath
from being scanned.
See gh-8687
[1] https://github.com/neo4j/neo4j-ogm/issues/340
As part of the upgrade, this commit removes the use of any API that
has been deprecated in 2.9.0.pr1. This includes the config props
endpoint's use of SerializationFeature.WRITE_NULL_MAP_VALUES. This
has been replaced with configuring serialization inclusion to only
include properties with non-null values. This means that all
null-valued properties will no longer be serialized, not just those
that are an entry in a map.
Closes gh-8604
Closes gh-8537
Restructure `org.springframework.boot.autoconfigure.web` to better align
with the new package structure in `spring-boot`.
Auto-configuration is now split into client, servlet and reactive
sub-packages. In addition a new `http` package now handles common
HTTP concerns.
Fixes gh-8616
Separate logging ApplicationListeners classes to a different package
so that the root `logging` package is no longer aware of `context`
concerns.
Fixes gh-8611
Rework `org.springframework.boot.context.embedded` to relocate classes
to `org.springframework.boot.web`. Packages are now organized around
the following areas:
Packages for shared concerns, for example the `WebServer` interface
to start/stop a server and the common configuration elements:
- org.springframework.boot.web.context
- org.springframework.boot.web.server
Servlet specific packages:
- org.springframework.boot.web.servlet.server
- org.springframework.boot.web.servlet.context
- org.springframework.boot.web.servlet.filter
Reactive specific packages:
- org.springframework.boot.web.reactive.context
- org.springframework.boot.web.reactive.server
Embedded server implementations (both reactive and servlet):
- org.springframework.boot.web.embedded
In addition:
- Rename `EmbeddedServletContainerFactory` to `ServletWebServerFactory`
to align with the `ReactiveWebServerFactory`.
- Rename `EmbeddedWebApplicationContext` to
`ServletWebServerApplicationContext` and
- Rename `EmbeddedReactiveWebApplicationContext` to
`ReactiveWebServerApplicationContext`.
- Add checkstyle rules to restrict imports.
- Fixup all affected code to use the correct imports and local names.
Fixes gh-8532
This commit makes sure that if a `javax.cache.CacheManager` is required,
an auto-configured `HazelcastInstance` is fully resolved first. This
prevents the case where the JCache bootstrap actually starts an instance
early, followed by a second (potentially unwanted) instance created by the
regular auto-configuration.
Since the JCache implementation works with an `HazelcastInstance` behind
the scenes, if there is one `HazelcastInstance` configured and it has a
name, then we configure the `CacheProvider` to use that. Future Hazelcast
version will allow to pass the instance directly (i.e. not requiring an
actual name).
Closes gh-8484
This commit flags the `BeanPostProcessor` registered by the reactive
embedded support as `synthetic` so that it doesn't trigger an early
initialization of other components.
See gh-8467
This commit flags the two `BeanPostProcessors` registered by the
embedded support as `synthetic` so that they don't trigger an early
initialization of other components.
Closes gh-8467
Remove the creation of a separate `HazelcastInstance` specific to caching.
Instead, the general `HazelcastAutoConfiguration` is used and if a
`HazelcastInstance` bean is present we wrap it in a `CacheManager`.
Closes gh-8470
The additional configuration for an `HazelcastInstance` will be removed
in 2.0. This commit makes sure that the property is deprecated in 1.5
See gh-8470
As of Hazelcast 3.7, the bootstrap is pretty slow by default due to the
networking discovery. This commit disables both TCP/IP and multicast
discoveries.
This commit makes sure that if `local.mongo.port` is set, a `MongoClient`
on the embedded MongoDB instance is created. When an embedded instance
is detected, only the `host` property is used and the `uri` is ignored if
set.
This makes sure that the auto-configured `MongoClient` automatically
switches to the embedded server, even if a production uri has been
specified.
Closes gh-8219
Update DataSourceInitializedPublisher to always attempt to obtain the
published DataSource directly from the EntityManager. In the case where
the EntityManager doesn't provide a DataSource, the previous logic is
used.
Fixes gh-8296
This commit makes sure that if a `Validator` is auto-configured, it is
reused as the `webFluxValidator`. This is pretty much the same thing as
what was done recently for Spring MVC.
Since the infrastructure is now shared, the package protected class has
been published in the `.validation` package.
Closes gh-8400
An `HttpHandler` bean must be provided once the infrastructure triggered
by `@EnableWebFlux` has been processed. Rather than creating a
`HttpHandler` in that auto-configuration, this commit moves it to a
dedicated auto-config, like we do for `DispatcherServlet` for
servlet-based webapps.
As this is the only bean we auto-configure in a functional fashion, the
`WebFluxFunctionalAutoConfiguration` is now merged with this new
auto-configuration, making its purposes clearer.
Cloess gh-8436
Rework Spring MVC JSR-303 validation support a little more to move
most of the creation logic to the wrapper class. Also rename
`SpringValidatorAdapterWrapper` -> `WebMvcValidator`.
See gh-8223
This commit improves the initial solution by actually overriding the
`mvcValidator` `@Bean`. This gives us more control as whether a custom
validator has been specified or not. We now wrap it regardless of it
being custom or provided by auto-configuration.
Closes gh-8223
`MethodValidationPostProcessor` requires a `Validator` so we need to flag
it as an infrastructure bean to prevent an additional log that indicates
it won't be post-processed.
We obviously don't want to post-process the `Validator` here so adding the
additional meta-data is a good idea anyway.
Closes gh-8422
This commit add mock support for WebFlux with an infrastructure similar
to what `WebMvcTest` provides. `@WebFluxTest` can be used to test
controllers with a narrowed classpath that is relevant to WebFlux. Also,
`@SpringBootTest` now starts WebFlux in "mock" mode by default and
`@AutoConfigureWebTestClient` can be used to inject a `WebTestClient`
connected to the `ApplicationContext`.
To make that happen, a `ReactiveWebApplicationContext` interface has been
introduced to mirror what `WebApplicationContext` currently does. Things
are still a bit volatile at this point and that infra may move to Spring
Framework at some point.
Closes gh-8401
The server's session can now be configured in both a servlet and a
reactive environment. The latter has not requirement on the servlet API
and this commit removes the requirement to the `SessionTrackingMode`
enum.
Closes gh-8402
This commit creates auto-configuration classes for both the
annotation and functional variants of the WebFlux framework.
They provide the basic support to get started with those, by
creating the required `HttpHandler` using the provided application
context (for annotation) or `RouterFunction`s (for functional).
They do support `WebFilter` registration and a few advanced
features such as resource handling, `messageReaders|Writers`
and `ViewResolver` auto-registration.
Closes gh-8386
This commit adds the auto-configuration for creating reactive
`EmbeddedWebServer` instances. This adds support for the
following servers: Reactor Netty, Tomcat, Jetty and Undertow.
Fixes gh-8302
Fixes gh-8117
This commit adds an `EmbeddedWebServer` instance to the
`ReactiveWebApplicationContext` and ties it to the application
lifecycle.
To launch a reactive web application, two elements are required
from the context:
* a `ReactiveWebServerFactory` to create a server instance
* a `HttpHandler` instance to handle HTTP requests
Closes gh-8337
This commit adds the infrastructure for creating and customizing
reactive embedded web servers. Common configuration has been refactored
into the new `ConfigurableEmbeddedWebServer` interface.
See gh-8302
This commit makes sure that the Spring `Validator` used by the MVC
layer doesn't expose a JSR-303 contract, if any.
The default implementation of the `mvcValidator` is
`LocalValidatorFactoryBean`. While this object is exposed as a Spring
`Validator` only, its runtime capabilities expose that contract as well
as the standard `Validator` and `ValidatorFactory` ones.
Concretely, if an auto-configuration is checking if a
`javax.validation.Validator` bean is missing, the condition will match
since we only know about "advertized types": beans haven't been created
yet so we can't inspect their runtime capabilities. Since the condition
match, we will auto-configure a bean. At runtime though, we're no longer
ale to inject a `javax.validation.Validator` by type since two candidates
are available.
This commit introduces `SpringValidatorAdapterWrapper`, a wrapper class
on any `SpringValidatorAdapter` (`LocalValidatorFactoryBean` being one of
the available implementations) that only exposes the Spring contract.
Also, if a `javax.validation.Validator` bean is available, we will use it
for the MVC layer, rather than creating a new one.
Closes gh-8223
- Apply standard code formatting
- Add class javadoc to MultipleResourceServerConfigurationTests
- Add missing @Override annotations
- Remove unused ExpectedException field
- Remove use of SpringApplicationBuilder from the tests
- Use @ImportAutoConfiguration to import auto-configuration
- Add assertions to verify that the orders haven't been changed
- Remove unnecessary mocking of EmbeddedServletContainerFactory
See gh-8347
Stephane Nicoll
Vedran Pavic
Aurélien Leboulanger
Spring Buildmaster
Phillip Webb
Dave Syer
Andy Wilkinson
Walter Seymore
Brian Clozel
tinexw
dreis
Phillip Verheyden
Dr. Stefan Hüttemann
Johnny Lim
Madhura Bhave
srichard
Eddú Meléndez
Mathieu Ouellet