preferred-mapper has been renamed to preferred-json-mapper to make it
clear that it only affects the JSON mapper and that the XML mapper
that will be used (if any) is unaffected
See gh-2247
This commit rewords the changes made in d718a80 so that simply adding
Gson to the classpath isn't sufficient to stop Jackson being used
for HTTP JSON mapping. To use Gson, the user must now either remove
Jackson from the classpath (not an option if they also wish to use
the Actuator) or configure the spring.http.converters.preferred-mapper
property with a value gson.
Closes gh-2247
Previously the recommendation when a user wanted to use Gson was to
exclude Jackson from the classpath and add Gson. This worked fine until
the user also want to use the Actuator which requires Jackson. To get
over this hurdle the user could leave Jackson on the classpath and
perform their own HttpMessageConverter configuration and register a
GsonHttpMessageConverter instead of or before any Jackson-based
converter. A little complicated, but it worked.
This commit makes things easier by updating the auto-configuration for
HTTP message converters to prefer Gson when both Gson and Jackson are
on the classpath, i.e. in the presence of both, a
GsonHttpMessageConverter will be auto-configured and a
MappingJackson2HttpMessageConverter won’t be. This allows an
application to easily use Gson while allowing the Actuator to continue
to use Jackson.
Closes gh-2247
This commit adds support for configuring the XA DataSource and
ConnectionFactory pools created by Atomikos and Bitronix via the
environment. The property prefixes vary depending on the transaction
manager that’s in use. They are:
Bitronix:
- spring.jta.bitronix.datasource
- spring.jta.bitronix.connectionfactory
Atomikos:
- spring.jta.atomikos.datasource
- spring.jta.atomikos.connectionfactory
The configuration processor has been updated to ignore
javax.jms.XAConnectionFactory and javax.sql.XADataSource as neither of
these types can be created via property binding.
Closes gh-2027
At the time of writing WAS only supports JPA 2.0 which means that
Hibernate 4.2 is the latest version that can be used. SpringJtaPlatform
is Hibernate 4.3-specific as JtaPlatform’s package changed between
Hibernate 4.2 and 4.3. This means that SpringJtaPlatform can’t be used
on current versions of WAS. Futhermore, SpringJtaPlatform won’t work on
WAS even if we could use Hibernate 4.3 as WAS doesn’t make its
TransactionManager available to application code (it’s considered too
dangerous for general consumption) and SpringJtaPlatform
requires a TransactionManager.
This commit updates HibernateJpaAutoConfiguration to always treat WAS as
a special case and configure Hibernate with one of its WAS-specific
JtaPlatform implementations.
Closes gh-2326
Previously, when JpaProperties was applying additional properties it
discarded any existing properties. This meant that custom
configuration of Hibernate's JtaPlatform was not detected and that
Boot's SpringJtaPlatform would always be configured instead.
This commit updates JpaProperties to include all of the existing
properties when it's asked to apply any additional properties.
See gh-2348
Closes gh-2359
This commit prevents the `Accept-Charset` from being written by the
StringHttpMessageConverter. This feature is enabled by default in the
framework and writes a *quite long* response header with all charsets
supported by the server.
Closes gh-2370, see gh-1800
Jetty’s GzipFilter is a container-agnostic Filter that can be used to
provide gzip and deflate encoding of HTTP responses. This commit adds
auto-configuration for GzipFilter that is enabled when
org.eclipse.jetty:jetty-servlets is on the classpath. The filter can
be configured using spring.http.gzip.*
See gh-2031
Tomcat provide built-it support for gzip compression of HTTP responses.
This commit adds support for enabling and configuring this compression
via the environment using server.tomcat.compression and
server.tomcat.compressableMimeTypes.
See gh-2031
Previously, some classes that were annotatated with
@ConditionalOnWebApplication assumed that, if the application was a
web application, Spring MVC (spring-webmvc) would be on the classpath.
If it was not, the application would fail to start, typically with an
error relating to WebMvcConfigurerAdapter being unavailable.
This commit updates the affected configuration classes and annotates
them with @ConditionalOnClass(WebMvcConfigurerAdapter.class) to
ensure that their auto-configuration only takes effect if its a web
application and Spring MVC is on the classpath.
Fixes gh-2345
The package names changed a bit from the prototype project, but wuth vanilla
autconfiguration usage that shouldn't matter. Follows closely the Groovy
templates support. Templates live in classpath:/templates/*.html by default.
Fixes gh-2242
Fix ParentAwareNamingStrategy to set ObjectName properties for the
'identity' and 'context' attributes. Also update JmxAutoConfiguration
to ensure that the ParentAwareNamingStrategy is created in each context
and that the `mbeanExporter` bean is created. Prior to this commit the
nested @EnableMBeanExport class always meant that the mbeanExporter
condition never matched.
Fixes gh-2243
Update WebMvcAutoConfiguration to ensure than the viewResolver bean
is not created if a user defined ContentNegotiatingViewResolver bean
is defined.
Fixes gh-2269
Update WebMvcAutoConfiguration so that the RequestMappingHandlerMapping
bean is @Primary. Prior to this commit a NoUniqueBeanDefinitionException
would be thrown then using the MvcUriComponentsBuilder.
Fixes gh-2237
Add Ordered interface to all EmbeddedServletContainerCustomizers with
a value of 0. Prior to this commit it was difficult for a user to
define a customizer that would be applied before ours, even if they
implemented Ordered or added @Order annotations.
Fixes gh-2123
Update HibernateJpaAutoConfiguration to catch NoClassDefFoundError when
setting the JTA_PLATFORM. The exception can occur when running on WAS
since it ships with Hibernate 4.2 and SpringJtaPlatform extends from
AbstractJtaPlatform which is not present.
The exception is now ignored if a JDNI environment is available,
otherwise it is re-thrown.
Fixes gh-2218
Update HypermediaAutoConfiguration to apply the Jackson2HalModule to
the primary ObjectMapper. This restores the behavior of Spring Boot
1.1 where HATEOAS types could be serialized for both `application/json`
and `application/json+hal` content types.
A `spring.hateoas.apply-to-primary-object-mapper` property has also been
provided to opt-out if necessary.
Fixes gh-2147
The Servlet spec prohibits ServletContextListeners from being registered
programatically other than from with a call to
`ServletContainerInitializer.onStartup`. This restriction is not
consistently enforced by the various embedded servlet containers that
Boot supports:
- Jetty 8 does not enforce the restriction.
- Jetty 9 enforces the restriction. We were working around it be calling
setExendedListenerTypes(true) on the context.
- Tomcat somewhat enforces the restriction: it doesn't allow a
ServletContextListener to be added once the first
ServletContextListener has been called. We were using a
LifecycleListener to drive the ServletContextListeners.
- Undertow enforces the restriction and we were not working around it.
This resulted in gh-2192 being raised.
ServletListenerRegistrationBean is a ServletContextListener and is used
to register listeners, including ServletContextListeners, with the
servlet context. To adhere to the letter of the servlet spec this means
that ServletListenerRegistrationBeans need to be called from with
ServletContainerInitializer.onStartup. This commit updates all of the
embedded servlet container implementations to use a
ServletContainerInitializer to drive any ServletContextInitializers.
This makes the lifecycle more consistent across the supported containers
and allows ServletListenerRegistrationBeans to be able to register
ServletContextListeners on all supported embedded containers.
Fixes gh-2192
Update GroovyTemplateAutoConfiguration so that the `/template`
folder check only occurs when the groovy-all jar is not being
used.
Fixes gh-2190
See gh-1915
Add auto-configuration for thymeleaf-extras-conditionalcomments which
allows parsing of conditional comments for IE.
Example:
<!--[if lt IE 8]>
<link rel="stylesheet" th:href="@{/styleIE.css}"
type="text/css"/>
<![endif]-->
Without this dialect all Thymeleaf attributes are ignored inside the
comment.
Fixes gh-2113
Update DispatcherServletAutoConfiguration to alias a MultipartResolver
that is not named correctly. This allows the DispatcherServlet to pick
up any MultipartResolver bean, regardless of its name.
See gh-2162
Update MongoDataAutoConfiguration to set the MongoMappingContext
initialEntitySet by scanning for @Document or @Persistent classes
from AutoConfigurationPackages.
Fixes gh-2107
Since we use a composite ViewResolver glbally by default it can be
awkward to switch off the view technology that you have on the classpath
but aren't actually using.
Update Rest, Hypermedia and HttpMessageConverter auto-configuration to
ensure beans are created in the correct order.
Prior to this commit the MappingJackson2HttpMessageConverter bean would
not be created because Spring Data Rest's TypeConstrained versions had
already been registered.
Fixes gh-1729
Update JndiConnectionFactoryAutoConfiguration to ensure that the
JmsProperties bean is created. Prior to this commit deployment to
a WildFly would fail with a NoSuchBeanDefinitionException.
Fixes gh-2072
Add a `spring.mvc.set-ignore-default-model-on-redirect` property to
allow RequestMappingHandlerAdapter.setIgnoreDefaultModelOnRedirect to
be easily customized and change the default value to 'true'.
Fixes gh-2018
Previously, tuning the pubSubDomain flag only impacted the created
JmsTemplate leaving any default listeners with the default settings.
If no default JmsListenerContainerFactory is defined, the created
one is using that property as well now.
SecurityAutoConfiguration, via its import of
AuthenticationManagerConfiguration, requires spring-security-config
to be on the classpath as AuthenticationManagerConfiguration extends
GlobalAuthenticationConfigurerAdapter from spring-security-config.
This commit makes SecurityAutoConfiguration conditional on the
presence of GlobalAuthenticationConfigurerAdapter so that the
auto-configuration will be disabled in its absence rather than causing
an app to fail to start.
Closes gh-2046
When the user provides their own AuthenticationManager we do a lazy
initialization and didn't (till now) inject the AuthenticationEventPublisher
Fixes gh-2033
Set the field javadoc of many properties that are managed via
configuration so that the "description" field is available in the
meta-data.
Closes gh-1808
Previously, the host had to have a custom value for the configuration
of the port or credentials (username and password) to take effect. This
meant, for example, that you couldn’t just set the port or just set the
username and password while using the default host.
This commit allows the port or username and password to be configured
without also configuring the host. The default host (localhost) and
port (27017) are retained.
Fixes gh-2008
Previously, when @EnableAutoConfiguration was used in multiple packages,
the last @EnableAutoConfiguration that was processed would
win and only its package would be stored as an auto-configuration
package.
This commit updates AutoConfigurationPackages to allow multiple package
name registrations. AutoConfigurationPackages.set(…) has been altered to
augment the constructor arguments of the BeanDefinition registered for
the initial call to the method so that the packages handed to the method
call will be added to the bean definition and not replace the previous
ones. The method has been renamed register(…) to reflect the changed
behavior.
Closes gh-1994
If you inject the class (via a servlet parameter) it seems that
Jersey tries to create all the beans for you (and fails). I thought
it was supposed to work (according to the docs), so I'm a bit confused
but the sample now has Spring DI and the tests pass.
Fixes gh-1981
Update MongoDataAutoConfiguration to provide easier configuration of
CustomConversions, the MappingMongoConverter, MongoMappingContext
and an authentication database.
Fixes gh-1619
Fixes gh-1730
Update BeanTypeRegistry to gracefully ignore LoadBeanClassException and
BeanDefinitionStoreException exceptions in the same way as
DefaultListableBeanFactory.doGetBeanNamesForType() does.
Fixes gh-1955
Previously, HypermediaAutoConfiguration would trigger the creation of
an ObjectMapper bean named _halObjectMapper. This bean did not have the
spring.jackson.* configuration applied to it, however its presence
would revent JacksonAutoConfiguration from creating its
ObjectMapper. This left the user with an ObjectMapper that did not
honour the spring.jackson.* configuration.
This commit updates HypermediaAutoConfiguration to use the
Jackson2ObjectMapperBuilder that may have been created by
JacksonAutoConfiguration. If the builder exists it is used to configure
the _halObjectMapper bean.
Fixes gh-1949
The http.mappers.* configuration properties assumed that the mapping
was JSON (on of the property names was jsonPrettyPrint) and also only
exposed a small subset of the configuration options supported by
Jackson (and GSON). The property names implied that it would configure
all HTTP mapping, however it was ignored by GsonAutoConfiguration.
This commit deprecates the support for http.mappers.* in favour of
configuring Jackson or Gson instead. Jackson can be configured
declaratively using the spring.jackson.* properties or programtically.
Gson can be configured programatically by using a GsonBuilder to
create a Gson instance with the desired configuration.
gh-1946 has been opened to add support for declarative configuration
of Gson.
Closes gh-1945
Previously, only the http.mappers.json-sort-keys property was applied
by JacksonAutoConfiguration. This commit updates it to also apply the
http.mappers.json-pretty-print property as well.
See #1919
Previously, configuration of a ServletContext init parameter required
the use of a ServletContextInitializer bean. This commmit adds
support for declarative configuration via the environment using
server.context_parameters.<name>=<value>.
Closes gh-1791
Add additional @AutoConfigureAfter elements to ActiveMQAutoConfiguration
and HornetQAutoConfiguration to ensure that they are configured after
JndiConnectionFactoryAutoConfiguration.
The possible sources for a JMS ConnectionFactory are:
1. JNDI
2. HornetQ (embedded broker or an external broker)
3. ActiveMQ (embedded broker or an external broker)
The last two auto configurations must run after JTA auto-configuration
has completed as it may register additional beans that are necessary to
enable XA.
Previously, the HornetQ embedded broker would start regardless of the
presence of a ConnectionFactory as a ConditionalOnMissingBean was
missing. Furthermore, there was no order condition for the JNDI
auto-configuration so it may just run after one of the broker has been
found.
JNDI takes now precedence to be consistent with the regular DataSource
auto configuration.
Fixes gh-1821
Change the default value of spring.datasource.jmx-enabled to false
to prevent InstanceAlreadyExistsException problems when using the
Spring Test Framework.
Fixes gh-1590
Update the auto-configured PersistenceExceptionTranslationPostProcessor
to proxy target classes as well as interfaces. Also provide a config
property to disable registration all together.
Fixes gh-1844
Add `CommonsLoggingLiquibaseLogger` implementation to adapt Liquibase's
`Logger` to Apache Commons Logging.
The `LiquibaseAutoConfiguration` class has also been updated to
automatically use the adapter
Fixes gh-1840
Upgrade to latest versions of Tomcat and Jetty and to the latest Servlet
API whilst will remaining compatible with Tomcat 7 and Jetty 8.
Fixes gh-1832, gh-369
Disable JTA auto-configuration altogether with a simple property. This
can be useful if the environment is JTA capable but the application does
not require it.
Fixes gh-1457
Override the default StringHttpMessageConverter provided by the standard
Spring MVC configuration so that is uses UTF-8 instead of the aging
default of the servlet spec (that is ISO-8859-1)
Fixes gh-1800
The old resolver class is deprecated already, and there's no reason
to continue to support the View and View resolver implementations
from Boot 1.1, so I removed those. Also there is no need to support
older versions of Groovy, so I removed a config class that was
conditional on a groovy version (by looking for the markup support).
Fixes gh-1578
Add a @NestedConfigurationProperty annotation which can be used to
customize how configuration mete-data is generated.
Prior to this commit only inner-classes where considered nested
(see Tomcat in ServerProperties). Using this new annotation, the Ssl
property in ServerProperties can be detected as well.
See gh-1001
Update the `spring-boot`, `spring-boot-autoconfigure` and
`spring-boot-actuator` project to generate configuration meta-data
files during compilation.
See gh-1001
Update OnBeanCondition to use a new BeanTypeRegistry which includes
optimized code when using a DefaultListableBeanFactory. The optimized
version calculates bean types only once per bean and caches the result.
Prior to this change the sample "pet clinic" application would spend
400-500 milliseconds evaluating OnBeanConditions, after this change it
spends around 120 milliseconds.
Fixes gh-1803
Andy Wilkinson
Phillip Webb
Stephane Nicoll
Manuel Doninger
Brian Clozel
Dave Syer
Spring Buildmaster
Michael Cramer
izeye
Oliver Gierke
Sebastien Deleuze
Maciej Walkowiak
juzer
sopov.ivan
Nicolás J. García