Move `ApplicationHome`, `ApplicationPid` and `ApplicationTemp` to the
`system` package. Since `system` package is now much lower level, the
existing `FileWriter` implementations also needed to move to prevent
package tangles.
Fixes gh-8614
This commit makes sure that a "cache.time-to-live" property is not
generated for endpoints that do not have a main read operation (i.e. a
read operation with no parameter or only nullable parameters).
This matches the endpoint feature that provides caching for only such
operation.
Closes gh-11703
Previously, Hikari's pool name was auto-configured with the value of
`spring.datasource.name` that defaults to `testdb`, which brings some
confusion.
This commit removes the default `testdb` value on
`spring.datasource.name` as it is a sane default only for an embedded
datasource. It is applied whenever applicable instead.
Closes gh-11719
This commit makes sure that `CharacterEncodingFilter` is ordered with
the `Ordered.HIGHEST_PRECEDENCE` and that other filters, potentially
reading the request body, are ordered after.
In this particular case, both `WebMvcMetricsFilter` and
`ErrorPageFilter` are now ordered at `Ordered.HIGHEST_PRECEDENCE + 1` to
avoid cases where the request body is read before the encoding
configuration is taken into account.
Closes gh-11607
This commit partially reverts the changes made in ec470fbe. While
the started message continues to be logged before any application and
command line runners are called, the publishing of
ApplicationReadyEvent now happens after the runners have been called.
Additionally, a new event, named ApplicationStartedEvent, has been
introduced. This new event is published after the context has been
refreshed but before any application and command line runners are
called.
Closes gh-11484
The reworking of the events described above also means that either
an ApplicationReadyEvent or an ApplicationFailedEvent will be
published and the latter should never be published once the former
has been published.
Closes gh-11485
This commits improves the cache auto-configuration for Redis by looking
up a custom "RedisCacheConfiguration" bean that allows to take full
control over the `RedisCacheManager`.
Closes gh-11599
As HibernateJpaConfiguration is package private, it is no longer
possible to extend the default Spring Boot configuration to apply
advanced settings. The most notable use case for this is the
customization of Hibernate properties using instance value vs. string
value that can be set using the "spring.jpa.properties" namespace.
This commit adds a HibernatePropertiesCustomizer callback interface that
can be implemented to tune Hibernate properties at will.
Closes gh-11211
I made a complete editing pass plus another pass to see where I could add more links, both within the document and to other parts of Spring. The result was a thorough edit (though I'm sure I missed things, purely due to the size of the thing).
Previously, the Docbook Maven plugin would generate an epub archive
with the majority of contents in OEBPS/, including content.opf, while
the META-INF/container.xml file reference to content.opf in the root
of the archive.
This commit overrides the epub.oebps.dir variable to move the content
into the root of the archive where it's expected to be. Implementing
this override highlighted that our customization stylesheet was not
being applied as the configuration property was incorrect (it was
epubCustomnization rather than the required epub3Customization). This
has been corrected along with a problem with missing images that
fixing it revealed.
Closes gh-11470
This commit adds GC and thread jvm metrics to the existing memory
metrics. All three are now managed by a unique
management.metrics.binders.jvm.enabled property.
Closes gh-11425
This commit moves management.server.context-path to
management.server.servlet.context-path to align with the configuration
key for the application's main context path.
Closes gh-11359
Prior to this change, the Spring MVC auto-configuration would add a new
formatter to convert `java.util.Date` to/from `String` using the
configured configuration property `spring.mvc.date-format`.
This commit adds a new `WebConversionService` class that registers
date formatters with a custom date format, or register the default ones
if no custom configuration is provided.
This avoids duplicating equivalent formatters in the registry.
With this change, date types from `java.util`, `org.joda.time` and
`java.time` are now all supported.
This commit also replicates this feature for WebFlux applications by
adding a new `spring.webflux.date-format` configuration property.
Closes gh-5523
Closes gh-11402
Rather than using two properties to enable or disable reactive and
imperative repositories for a particular store, this commit introduces
a new repository type condition that's backed by a single
spring.data.<store>.repositories.type property. The type can be
auto (automatically enables whatever's available), imperative (enables
imperative repositories), none (enables nothing), or reactive (enables
reactive repositories). The default is auto.
Repositories do not have a reactive option (such as JPA) continue to
have a spring.data.<store>.repositories.enabled property that takes a
boolean value.
Closes gh-11134
Drop the status endpoint and merge functionality back into the health
endpoint. The `management.endpoint.health.show-details` property can
be used to change if full details, or just the status is displayed.
Fixes gh-11113
Rename `reactive-repositories` to `reactiverepositories` and replace
`spring.resources.cache-control` with `spring.resources.cache.control`.
Fixes gh-11090
Previously, custom Hibernate naming strategies could only be
configured via properties. This allowed a fully-qualified classname to
be specified, but did not allow a naming strategy instance to be used.
This commit updates HibernateJpaConfiguration to use
ImplicitNamingStrategy and PhysicalNamingStrategy beans if they
exist. If both a bean exists and the equivalent property has been set,
the bean wins.
Update appropriate configuration properties to use the `Duration`
type, rather than an ad-hoc mix of milliseconds or seconds.
Configuration properties can now be defined in a consistent and readable
way. For example `server.session.timeout=5m`.
Properties that were previously declared using seconds are annotated
with `@DurationUnit` to ensure a smooth upgrade experience. For example
`server.session.timeout=20` continues to mean 20 seconds.
Fixes gh-11080
Update endpoint code to provide cleaner separation of concerns.
Specifically, the top level endpoint package is no longer aware of
the fact that JMX and HTTP are ultimately used to expose endpoints.
Caching concerns have also been abstracted behind a general purpose
`OperationMethodInvokerAdvisor` interface.
Configuration properties have been refined to further enforce
separation. The `management.endpoint.<name>` prefix provides
configuration for a single endpoint (including enable and cache
time-to-live). These properties are now technology agnostic (they
don't include `web` or `jmx` sub properties).
The `management.endpoints.<technology>` prefix provide exposure specific
configuration. For example, `management.endpoints.web.path-mapping`
allow endpoint URLs to be changed.
Endpoint enabled/disabled logic has been simplified so that endpoints
can't be disabled per exposure technology. Instead a filter based
approach is used to allow refinement of what endpoints are exposed over
a given technology.
Fixes gh-10176
This commit makes sure to automatically scan `Converter` and
`GenericConverter` beans when a test uses `@WebMvcTest` or
`@WebFluxTest`.
Closes gh-10802
This commit enables HTTP/2 support for Tomcat and Undertow, for both
Servlet-based and Reactive applications.
Enabling the `server.http2.enabled` configuration flag is enough with
Undertow.
Tomcat has a few prerequisites:
* Tomcat 8.5 requires JDK8+ and the proper libtcnative version installed
on the host
* Tomcat 9.0.x requires JDK9+
Closes gh-10043
This commit adds a new configuration properties class for configuring
HTTP/2 protocol support.
By default, this protocol is disabled as enabling it requires several
manual changes:
* configuring a web server for proper TLS and ALPN support
* configuring a proper SSL certificate
See gh-10043
Remove extraneous white space and adjusted the length of non-code lines
to be as close to 90 characters (but not over 90 characters) as
possible.
Update a couple things I missed in the editing pass, too.
Closes gh-10897
Remove extraneous white space and adjusted the length of non-code lines
to be as close to 90 characters (but not over 90 characters) as
possible.
Update a couple things I missed in the editing pass, too.
Closes gh-10896
Remove extraneous white space and adjusted the length of non-code lines
to be as close to 90 characters (but not over 90 characters) as
possible.
Update a couple things I missed in the editing pass, too.
Closes gh-10893
Remove extraneous white space and adjusted the length of non-code lines
to be as close to 90 characters (but not over 90 characters) as
possible.
Update a couple things I missed in the editing pass, too.
Closes gh-10892
Update the logback file appender to use `SizeAndTimeBasedRollingPolicy`
rather than `FixedWindowRollingPolicy`.
Add two new properties to improve log file configuration capabilities:
- `logging.file.max-history` to limit the number of archive log files
to keep.
- `logging.file.max-size` to limit the log file size.
See gh-6352
Previously, spring.config.name was handled in such a way that its
value would replace the defaults. By constrast, spring.config.location
would add to the defaults.
Update the handling of spring.config.location so that it replaces the
defaults. This aligns its behaviour with spring.config.name. To allow
users to add additional locations a new property,
spring.config.additional-location, has been introduced. It behaves as
spring.config.location did prior to this change.
Closes gh-10595
This commit automatically instruments all available data sources with
a configurable metric name. The instrumentation can be disabled in case
more control is needed.
Closes gh-10295
This commit renames spring.datasource.initialize to
spring.datasource.initialization-mode and use the
DataSourceInitializationMode enum. By default, only an embedded
datasource is initialized.
Closes gh-10773
This commit introduces a endpoints.<id>.web.path generic property that
allows to customize the path of an endpoint. By default the path is the
same as the id of the endpoint.
Such customization does not apply for the CloudFoundry specific
endpoints.
Closes gh-10181
The current documentation references mechanisms for OpenShift 2, which
has been changed significantly with the latest releases, specifically the
OpenShift 3 release.
Closes gh-10609
Madhura Bhave
dreis2211
Phillip Webb
Johnny Lim
Andy Wilkinson
Stephane Nicoll
Brian Clozel
Gary Russell
ioann
Jay Bryant
Marcel Overdijk
Joe Kutner
Vedran Pavic
Eric Spiegelberg
Kazuki Shimizu
Alex Derkach
Henrik
Eddú Meléndez
James McShane