Update `ConfigurationPropertiesReportEndpoint` so that properties that
are set with a Boolean class but read with a boolean primitive still
appear in the report. The allows the Endpoint.isEnabled() property to
be displayed.
Fixes gh-2929
Make sure the Hazelcast statistics support is not triggered if the Spring
support is not present. The Hazelcast dependency alone may be used with
JCache and this should not trigger the support of the native Hazelcast
metrics infra.
See gh-2633
Previously the @Value annotation was not on a top level @Bean field
(it was nested inside). Manually constructing the bean in a separate
configuration class seems like the best way to get it to actually bind
at runtime.
Users can add @ExportMetric[Reader,Writer] to readers and writers that
they want to participate in the default exporter. There is also still an
@ActuatorMetricWriter that is used for the legacy (non-Java8) Gauge and
CounterServices.
The redis export and aggregate use case is a lot nicer with this
shared data between the two component types.
Also made MetricExportProperties itself a Trigger (so the default
delay etc. can be configured via spring.metrics.export.*).
Write to NUL on Windows and /dev/null on other platforms. Increase the
default number of iterations to avoid problems with the reduced timing
precision on Windows.
Closes gh-2976
User can add a bean of type MetricsEndpointMetricReader to opt in
to exporting all metrics via the MetricsEndpoint (instead of via
MetricReaders). There are disadvantages (like no accurate timestamps)
so it's best to leave it as an opt in.
Also improved tests for metric auto configuration a bit.
In principle you might have multiple "system" repositories, all
of which you want to go to public metrics or not be metrics exporters.
This change adds a new annotation and renames the old one, so that
reades and writers can be distinguished, and also changes the
autowiring of them to accept multiple values.
Also adds automatic public metrics for Spring Integration.
This commit adds CORS support to the Actuator’s MVC endpoints. CORS
support is disabled by default and is only enabled once the
endpoints.cors.allowed-origins property has been set.
The new properties to control the endpoints’ CORS configuration are:
endpoints.cors.allow-credentials
endpoints.cors.allowed-origins
endpoints.cors.allowed-methods
endpoints.cors.allowed-headers
endpoints.cors.exposed-headers
The changes to enable Jolokia-specific CORS support (57a51ed) have been
reverted as part of this commit. This provides a consistent approach
to CORS configuration across all endpoints, rather than Jolokia using
its own configuration.
See gh-1987
Closes gh-2936
This avoids a potential problems with ordering between Dropwizard and
normal repository configuration. A Dropwizard sample has been added to
verify the behaviour.
Different physical sources for the same logical metric just need to
publish them with a period-separated prefix, and this reader will
aggregate (by truncating the metric names, dropping the prefix).
Very useful (for instance) if multiple application instances are
feeding to a central (e.g. redis) repository and you want to
display the results. Useful in conjunction with a
MetricReaderPublicMetrics for hooking up to the /metrics endpoint.
This seems pretty efficient (approx 12M write/s as opposed to 2M with
the DefaultCounterService). N.B. there is no need to change most of
the rest of the metrics stuff because metrics are write-often, read-
seldom, so we don't need high performance reads as much.
The Spring Integration configuration and Dropwizard support has changed
a bit. Functionally very similar and probably opaque to users, but now
the messaging operates as an Exporter on a @Scheduled method, and
Dropwizard is a replacement [Gauge,Counter]Service.
Metrics are all
collected live in-memory (and can be very fast with Java 8), buffered
there and shipped out to a MessageChannel (if one exists with id
"metricsChannel") in a background thread.
We can still use Java 8 library APIs (like LongAdder) but to compile
to java 7 compatible byte code we have to forgo the use of lambdas :-(
and shorthand generics (<>).
Fixes gh-2682, fixes gh-2513 (for Java 8 and Dropwizard users).
Spring Framework 4.2 introduces improved support for CORS. Notably this
means that a DispatcherServlet will now process an OPTIONS request if
it contains an Origin header, without having to enable OPTIONS request
dispatching for every endpoint.
This commit takes advantage of these changes in Spring Framework 4.2 by
configuring the controller that wraps Jolokia’s AgentServlet to handle
OPTIONS requests. This allows Jolokia’s CORS support to be configured
using Jolokia’s standard configuration, as described in section 4.1.5
of the Jolokia documentation [1].
Closes gh-1987
[1] https://jolokia.org/reference/html/security.html
Previously ManagementSecurityAutoConfiguration used Spring Security's
default realm of "Realm" when authentication failed. This was confusing
because when prompted for authentication (i.e. no credentials provided)
the realm "Spring" was requested.
This commit ensures the Realm that is used is consistent for all of of the
security auto configuration.
Fixes#2466
In addition to the changes already made in 1.2.x, this commit updates
the tests in spring-boot-actuator to ensure that any Elasticsearch
data files are written into the target directory. This avoids problems
when switching branches caused by different versions of Elasticsearch
trying to read the files.
Update CacheStatisticsProvider to use a generic to indicate the type
of cache supported. Also extract individual CacheStatisticsProvider
implementations and made statistics an auto-configuration.
See gh-2633
Prior to this commit, EndpointWebMvcAutoConfiguration would start a
child context if the management port was different to the server port
and the application context was a web application context. This caused
two problems:
If a user built an executable war and configured the management port so
that it was different to the server port, their application would run
successfully when launched with java -jar, but it would fail when
deployed to Tomcat as an attempt would be made to start embedded Tomcat.
Secondly, if a user ran a test annotated with @WebAppConfiguration the
main embedded Tomcat instance would not be started, but the child
context would trigger the creation of a Tomcat instance listening on the
configured management port. This is unexpected as @WebIntegrationTest
or @IntegrationTest and @WebAppConfiguration should be required to have
the test trigger full startup of the application and listen on the
configured ports.
This commit updates EndpointWebMvcAutoConfiguration so that it will only
start a child context when the management port is different to the
server port and the EmbeddedWebApplicationContext has an embedded
servlet container. This resolves the two problems described above as
there will be no embedded servlet container when deployed to a
standalone container or when a test is run without @IntegrationTest.
Fixes gh-2798
Previously, when multiple cache managers had a cache with the same name,
the prefix for the first cache that was processed would not include its
cache manager’s name, but all subsequent prefixes would include the
cache manager’s name. This was inconsistent, and due to the cache
managers being unordered, the prefixing was not deterministic.
This commit updates the prefixing logic so that when there is a clash,
all of the affected prefixes will include the name of the cache manager.
For example, with cache managers named first and second and each
with a cache named users, the prefixes will be cache.first_users and
cache.second_users rather than cache.users and
cache.{first|second}_users.
Closes gh-2824
multipleCacheManagers fails on the CI server but does not fail
locally. This commit updates assertMetrics to include information
about the actual metrics so it's clear why the expectation was not
met.
Add an abstraction that provides a standard manner to retrieve a
statistics snapshot of a cache.
Specific implementations for JSR-107, ehcache, hazelcast, guava and
concurrent map are provided. At the moment the size of the cache and
the hit/miss ratios are recorded. Cache metrics are exposed via the
`cache.` prefix followed by the name of the cache. In case of conflict,
the name of the cache manager is added as a qualifier.
It is possible to easily register a new CacheStatisticsProvider for an
unsupported cache system and the CacheStatistics object itself can be
extended to provide additional metrics.
See gh-2633
Closes gh-2770
Previously, if a call to doFilter in MetricFilter failed (i.e. it threw
an exception), it would be handled as if it had a response status of
200. This is because the servlet container was yet to handle the
exception and set the response status to 500.
This commit updates MetricFilter to assume that an exception thrown from
doFilter will result in a response with a status of 500. Strictly
speaking, even though the filter has highest precedence and will
therefore run last on the way back out, this may not always be the case.
For example, a custom Tomcat Valve could handle the exception and result
in a 200 response but that’s an edge case that’s into shooting yourself
in the foot territory.
Closes gh-2818
- added setIndices to ElasticsearchHealthIndicatorProperties to enable
setting the indices property from configuration files
- Elasticsearch cannot handle "null" if the health of all indices should
be checked; use "_all" instead
Closes gh-2812
This commit updates Spring Boot to use Spring Security 4. As a result
of this, the coordinates of Thmyeleaf's Spring Security extra, for
which dependency management and auto-configuration is provided, have
been updated to the Spring Security 4 variant.
Closes gh-2727
- Nest the configuration class in HealthIndicatorAutoConfiguration,
bringing it into line with the other health indicator configuration
classes
- Include the statistics from the response in the health’s details
- Map YELLOW to UP rather than UNKNOWN as it indicates that the cluster
is running but that “the primary shard is allocated but replicas are
not” [1]. The details can be used to determine the precise state of
the cluster.
- Add a property to configure the time that the health indicator will
wait to receive a response from the cluster
- Document the configuration properties
- Update the tests to cover the updated functionality
See gh-2399
[1] http://www.elastic.co/guide/en/elasticsearch/reference/1.x/cluster-health.html
This commit improves upon the changes made in a8bf9d3 by adding
support for relaxed binding of the endpoints.enabled and
endpoints.<name>.enabled properties. This is achieved by replacing
use of @ConditionalOnExpression (which does not support relaxed
binding) with a custom condition implementation that uses
RelaxedPropertyResolver.
Closes gh-2767
Previously, only invocations of /metricName/ would honour the enabled
property and return a not found (404) response. For endpoints which
support nested paths, access to /metricName/foo would ignore the enabled
flag and return an OK (200) response. Furthermore, there was a comment
in EndpointMvcAdapter that suggested that an endpoint shouldn’t be
called when it is disabled, however this was not the case.
This commit updates EndpointWebMvcAutoConfiguration and
JolokiaAutoConfiguration to only register their MvcEndpoint beans if
the underlying endpoint is enabled. This means that an
EndpointMvcAdapter should not be called if its delegate is disabled,
making the comment described above accurate.
The check for the delegate being enabled has been retained so as not to
rely upon the auto-configurations’ behaviour. The methods which handle
nested paths (MetricsMvcEndpoint.value() and
EnvironmentMvcEndpoint.value()) have been updated to add the same check
for the enablement of their delegate.
Fixes gh-2767
Prior to this commit, every EndpointMBean used its own ObjectMapper.
Each of these ObjectMappers was created using new ObjectMapper() with
no opportunity for configuration.
This commit uses the ObjectMapper from the application context and
shares it among all EndpointMBeans. This gives the user control over
the ObjectMapper’s configuration using spring.jackson.* properties,
their own Jackson2ObjectMapperBuilder bean, etc. In the absence of an
ObjectMapper in the application context a single ObjectMapper is
instantiated and is used by all EndpointMBeans instead.
To allow the ObjectMapper to be shared, a number of constructors have
been overloaded to also take the ObjectMapper as a parameter. In these
cases the old constructor has been preserved for backwards compatibility
but has been deprecated.
Closes gh-2393
Prior to this commit, the auto-configuration report (both in its logged
form and the actuator endpoint) listed the positive and negative matches
but did not list the classes, if any, that the user had excluded.
This commit updates the logged report and the actuator endpoint to
expose a list of the excluded class names configured via the exclude
attribute on @EnableAutoConfiguration.
Closes gh-2085
Previously, disk health information only included the amount of free
space and the configured threshold. This commit adds the disk’s total
space.
See gh-2705
Update SystemPublicMetrics to silently ignore ManagementFactory
NoClassDefFoundErrors which can occur when deploying to Google App
Engine.
Fixes gh-2701
Previously, the response from /health was not cached if the request
was secure, i.e. the user has authenticated, or the endpoint was
configured as not being sensitive.
The commit updates HealthMvcEndpoint to apply the caching logic
all the time. Users that do not want caching can disable it by
configuring the TTL with a value of zero.
Closes gh-2630
Define an additional health indicator for each ConnectionFactory instance
defined in the context. Extracts the provider name from the connection
meta-data.
Fixes gh-2016
Spring Boot's metrics infrastructure requires a Metric to have a
Number value. Coda Hale's ThreadStatesGaugeSet includes a Gauge
named deadlocks with a Set<String> value (each entry in the set is a
description, including stacktrace, of a deadlocked thread). There's
no obvious way to coerce this to a Number, and there's already a
deadlocks.count metric in the set.
This commit updates MetricRegistryMetricReader to ignore the addition
of any Gauge with a non-Number value.
Fixes gh-2593
ee567fa boldy claimed that it had made MetricRegistryMetricReader
thread-safe. It had not. This commit should actually make it thread
safe. I hope.
One notable improvement is that MetricRegistryMetricReader.findAll()
will no longer contain null values if a metric is removed on another
thread during iteration.
names is now a ConcurrentHashMap to allow it to be safely read and
written without holding a lock.
reverse is a LinkedMultiValueMap which is not thread-safe. This could
lead to values being lost when concurrent add calls were made. Access
to reverse is now protected by synchronizing on an internal monitor
object.
Calls to containsKey(key) followed by get(key) have been reworked to
only call get(key), this avoids the possibility of the key being
removed after the contains check but before the get.
Closes gh-2590
MetricRegistryMetricReader’s fields where neither final, nor volatile
but could be accessed on multiple threads. This lead to visibility
problems where the value of a field would unexpectedly be null, causing
an NPE.
This commit updates all of the fields to declare them as final, thereby
ensuring that their values are guaranteed to be visible across different
threads.
Fixes gh-2590
If there is more than one DataSource and the non-primary bean-name is
'datasource' an incorrect metric name is chosen.
The metrics are named datasource.active and not datasource.xxx.active. To
avoid this, the shortening of the bean-name only occurs if the bean-name
is longer than 'datasource'.
See gh-2320
Previously each endpoint was secured for path, path/, and path.*.
This meant that a request to path/foo was not secured. This commit
secures path/** to ensure that requests to a nested endpoint path are
also secured.
Fixes gh-2476
Update InMemoryAuditEventRepository to consider the date when searching
for events. Also switch to a circular buffer implementation and update
the capacity to limit the total number of items rather than limiting
per principal.
Fixes gh-2291
Update AbstractEndpoint to correctly support the `endpoints.enabled`
property. Also fix EnvironmentEnpoint which would previously prevent
the Environment from being set.
Fixes gh-2264
Closes gh-2265
Dave Syer
Phillip Webb
Spring Buildmaster
Stephane Nicoll
izeye
Andreas Ahlenstorf
Andy Wilkinson
Josh Thornhill
Rob Winch
Christian Laakmann
Sergey Egorov
Binwei Yang
Johannes Stelzer
Mathieu Bernatet