Update Spring Boot nested JarFile support to improve the performance of
signed jars. Prior to this commit, `certificates` and `codeSigners`
were read by streaming the entire jar whenever the existing values
were `null`. Unfortunately, the contract for `getCertificates` and
get `getCodeSigners` states that `null` is a valid return value. This
meant that full jar streaming would occur whenever either method was
called on an entry that had no result. The problem was further
exacerbated by the fact that entries might not be cached.
See gh-19041
This commit updates the Gradle Plugin to filter dependencies based on
the Spring-Boot-Jar-Type entry in their manifest. Jars with a
Spring-Boot-Jar-Type of dependencies-starter are excluded. Unlike the
Maven plugin, jars with a type of annotation-processor are not
excluded. It is not necessary with Gradle as use of the
annotationProcessor configuration for such dependencies already ensures
that they are not included.
See gh-22036
This commit updates the Maven Plugin to filter dependencies based on
the Spring-Boot-Jar-Type entry in their manifest. Jars with a
Spring-Boot-Jar-Type of dependencies-starter or annotation-processor
are excluded.
See gh-22036
Previously, PropertiesLauncher would close each archive that it
iterated over when creating its ClassLoader. This was not aligned
with JarLauncher's behaviour and left the ClassLoader with closed
archives. The close was introduced in [1] and became more apparent
following the change to fail operations on closed archives [2].
This commit updates Launcher to remove the close() that was added in
[1]. This aligns the behavior of PropertiesLauncher with JarLauncher
and ensures that the ClassLoader does not have entries backed by
closed archives on its classpath.
Fixes gh-23165
[1] ad72f86bdb
[2] ed7a5db174
Add repeatable `@ImportConfigurationPropertiesBean` annotation that can
be used to import types and treat them as `@ConfigurationProperties`
beans. This annotation is specifically designed to support third-party
classes that can't contain any Spring annotations.
Closes gh-23172
In some cases, a call to the Docker image load API will fail but
return a 200 OK response status code and an empty response. This
commit detects that the response from this call is empty and
treats this condition as an error instead of a silent failure.
Fixes gh-23130
This commit changes the path used to invoke lifecycle binaries in
CNB builders from `/lifecycle` to `/cnb/lifecycle` to conform to
the CNB spec. This will ensure the build plugin image-building
goals and tasks are compatible with future versions of builders
that may not support both paths.
See gh-23009
Update `BuildImageMojo` so that commons HTTP wire logging is configured
to ERROR. Without this update, running `mvn -X` will produce a great
deal of logging since by default HTTP Client logs all bytes transfered
at DEBUG and Maven will enable DEBUG for all logs.
Closes gh-22674
Update `Repackager` to ensure that `getLayout` is called before we
backup the source file. This restores earlier behavior that some
custom `ModuleFactory` implementations were relying on.
Closes gh-22995
This commit adds a check to the `layertools extract` command to
ensure that the jar file being processed is readable and has a
valid directory.
Fixes gh-22993
Create a new `JarFileWrapper` class so that we can wrap and existing
`JarFile` and offer a version that can be safely closed.
Prior to this commit, we provided wrapper functionality in the `JarFile`
class itself. Unfortunately, because we override `close` and also create
a lot of wrappers this caused memory issues when running on Java 11.
With Java 11 `java.util.zip.ZipFile` class uses `FinalizableResource`
for any implementation that overrides `close()`. This means that any
wrapper classes will not be garbage collected until the JVM finalizer
thread runs.
Closes gh-22991
This commit adds a pullPolicy option to the configuration of the Maven
plugin spring-boot:build-image goal and the Gradle plugin bootBuildImage
task. The new option gives users control over pulling the builder image
and run image from a remote image registry to the local Docker daemon.
See gh-22736
Previously, the Maven plugin integration tests used a settings.xml file
that defined https://repo.spring.io/snapshot as a repository. This
allowed them to resolve snapshots of the plugin's Spring Framework
dependencies but it had the unfortunate side-effect of also allowing
them to resolve snapshots of other Spring Boot modules from Artifactory
rather than using those currently being built.
This commit replaces the repositories in settings.xml with a Gradle
task that resolves the necessary dependencies and populates a local
repository with the dependencies' jars and pom files. This is achieved
using a ComponentMetadataRule that creates a custom variant of each
dependency that includes its pom file, inspired by the example in
gradle/gradle/#11449. A configuration that extends the
runtimeClasspath configuration and select the custom variant via its
attribute is then used to resolve the jars and pom files of the runtime
classpath such that they can then be used to populate the local
repository.
Closes gh-22828
Prior to this commit, an entry in the environment map provided to the
build plugin image building goal or task that had a null value would
result in a failure with a message that was difficult to diagnose.
This commit treats env map entries with a null value as an empty
entry to prevent the failure and also make it easier to provide an
explicit empty entry in the Maven XML.
Fixes gh-22703
This adds build caching and build scans.
The changes required disabling scans when using the maven invoker
plugin in order to not cause duplicate build scans when invoking other
maven builds. There is also an empty `.mvn` folder in the
spring-boot-starters project to prevent duplicate build scans as well
since there is no way to pass properties to the maven-javadoc-plugin.
The checkstyle plugin was causing a cache miss with the
`propertyExpansion` because it contains an absolute path. The absolute
path is now ignored and instead the files are added as inputs to the
checkstyle plugin. This only enables the local build cache. The remote
cache is not yet enabled.
On my local machine:
./mvnw clean install build times go from about 30 minutes to about 10 minutes.
./mvnw clean install -Pfull build times go from about 60 minutes to about 13 minutes.
See gh-22089
This commit adds a check to the support code for the Gradle plugin
bootBuildImage task to ensure that the jar file that will be passed
to a builder is readable and has a valid directory. This prevents a
situation where the jar file cannot be read because it is prepended
with a launch script, and the builder does not receive any files to
process.
Notes have also been added to the Gradle plugin documentation to warn
against using a bootJar launchScript configuration and bootBuildImage
together, as well as caveats about launchScript that match the Maven
plugin documentation.
Fixes gh-22223
This commit improves the validation performed on the user
input provided to the layertools jarmode to provide more
clear error messages when the input is not correct and
reduce the chance of ambiguity.
Fixes gh-22042
Rename `ImageReferenceParser` to `Regex` and remove state. The regular
expressions are now used directly by the `ImageName` and
`ImageReference` classes with the values accessed directly from the
`Matcher`.
See gh-21495
Prior to this commit, an image name or run image name derived from
the project name or provided by the user would be passed to the CNB
builder without validation by the Maven plugin build-image goal or
Gradle plugin bootBuildImage task. This could lead to error messages
from the plugins that are difficult to understand and diagnose.
This commit makes parsing of the image names more strict, based on
the grammar implemented by the Docker go library. This provides
validation of the image names before passing them to the builder,
with a more descriptive error message when parsing and validation
fails.
Fixes gh-21495
Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
This commit adds a runImage property to the Maven plugin build-image
goal and the Gradle bootBuildImage task. The property allows the user
to override the run image reference provided in the builder metadata
with an alternate run image. The runImage property can be specified
in the build file or on the command line.
Fixes gh-21534
This commit changes the NamedPipeSocket used for communication with
a local Docker daemon to use a non-blocking AsynchronousByteChannel
instead of a blocking RandomAccessFile, modeled after a similar
change to the docker-java project. This eliminates the potential for
a blocking call to hang indefinitely.
Fixes gh-21672