This commit replaces "you're" with some other structure, often
simplifying the sentence in the process.
Also checked for words that end with "'ll" and "n't" but did not find
any.
See gh-28710
With the present example, the `secondDataSource` bean factory method
will use `firstDataSourceProperties` due to it being annotated with
`@Primary`.
This commit adds the `@Qualifier` needed to ensure `secondDataSource`
bean factory method uses `secondDataSourceProperties`.
See gh-28712
Update Tomcat, Jetty and Undertow `ServletWebServerFactory`
implementations so that they can write SameSite cookie attributes.
The session cookie will be customized whenever the
`server.servlet.session.cookie.same-site` property is set.
Other cookies can be customized with the new `CookieSameSiteSupplier`
interface which can be registered using `@Bean` methods.
Closes gh-20971
Co-authored-by Andy Wilkinson <wilkinsona@vmware.com>
This commit makes it clearer that, when using
@AutoConfigureTestEntityManager outside of @DataJpaTest, any tests using
the test entity manager must be @Transactional.
See gh-28086
When polling consumers or source polling channel adapters are used in
Spring Integration applications, they require some polling policy to
be configured.
This comment auto-configures a PollerMetadata bean which customized
via newly added `spring.integration.poller.*` configuration
properties or overriden completely be user-defined bean.
See gh-27992
Previously, a number of Elasticsearch properties were duplicated
across the spring.elasticsearch.rest and
spring.data.elasticsearch.client.reactive prefixes for configuring
the blocking REST client provided by Elasticsearch and the reactive
client provided by Spring Data respectively. This could cause
problems when using the Elasticsearch REST client configured with
a custom spring.elasticsearch.rest.uris. If Spring WebFlux (to make
use of WebClient) and Spring Data Elasticsearch were on the classpath,
the reactive Elasticsearch Client would be autoconfigured but it
would use the default value of its analogous
spring.data.elasticsearch.client.reactive.endpoints property. It
would be unable to connect, causing a startup failure.
This commit consoliates the configuration properties where possible.
Each setting that is common across the two clients is now configured
using a single, shared spring.elasticsearch property. Each setting
that is specific to the blocked REST client or the WebClient-based
reactive client now have prefixes of spring.elasticsearch.restclient
and spring.elasticsearch.webclient respectively.
The old properties beneath spring.elasticsearch.rest and
spring.data.elasticsearch.client.reactive have been deprecated. If a
any deprecated property is set, all of the new properties are
ignored. In other words, to migrate to the new properties, each usage
of a now-deprecated property must be updated to use its new
replacement instead.
Closes gh-23106
The auto-configuration requires `HtmlUnit`, so this auto-cofiguration
only works if both Selenium and HtmlUnit are used.
Prevents misinterpretation that WebDriver can be auto configured without
htmlunit.
See gh-27920
Edit the actuator docs so that more "You can..." phrasing is used.
For example
"Auditing can be enabled by providing"
becomes
"You can enable auditing by providing"
See gh-27759
Update example lead-in text to a slightly shorter form.
For example
"as shown in the following example"
Becomes
"as the following example shows"
See gh-27759
As of Spring Framework 5.3, `WebTestClient` can now be configured on top
of `MockMvc` for testing Spring MVC applications in a mock environment.
Prior to this commit, `WebTestClient` would be already configured for
WebFlux mock setups with `@AutoConfigureWebTestClient` or live servers
(for both MVC and WebFlux apps).
This commit enhances the `@AutoConfigureWebMvc` support so that a
`WebTestClient` instance is auto-configured if the spring-webflux
dependency is present on the classpath.
Closes gh-23067
* gh-26258:
Polish "Refine documentation"
Refine documentation
Polish "Add properties for Dynatrace metrics API v2 ingest with Micrometer"
Add properties for Dynatrace metrics API v2 ingest with Micrometer
Closes gh-26258
The documentation overview sections is supposed to provide a map
for the rest of the reference document. The getting help and upgrading
sections were moved to align with that.
The documentation overview sections is supposed to provide a map
for the rest of the reference document. The getting help and upgrading
sections were moved to align with that.
Using the revision line means that the revision number is automatically
set. The revision number is then included by the HTML and PDF backends
in the standard location. In the HTML backend that's alongside the
list of authors. In the PDF backend that's on the title page.
Closes gh-26851
Allow groups to be used with standard locations so that order of
profile-specific files is consistent.
Prior to this commit, the default search locations considered for
application properties/yaml files was the following:
optional:classpath:/
optional:classpath:/config/
optional:file:./
optional:file:./config/
optional:file:./config/*/
Each of these locations was independent which could cause confusion
if certain combinations were used. For example, if profile-specific
files were added to `classpath:/` and `classpath:/config/` then the
latter would always override the former regardless of the profile
ordering.
This commit updates `StandardConfigDataLocationResolver` so that a
group of locations can be specified for each item. This allows us to
define the following set of search locations which provide more logical
ordering for profile-specific files
optional:classpath:/;optional:classpath:/config/
optional:file:./;optional:file:./config/;optional:file:./config/*/
Closes gh-26593
Previously, the embedded database connection that would be used
could only be controlled via the classpath. If multiple embedded
database dependencies were present, it wasn't possible to control
the one that the auto-configured would use. It also wasn't possible
to disable auto-configuration of an embedded database.
This commit introduces a new configuration property,
spring.datasource.embedded-database-connection. It can be set to
one of the values of the EmbeddedDatabaseConnection enum to control
the auto-configuration of an embedded database. Setting it to none
will disable the auto-configuration and ensure that an external
database is used instead.
Closes gh-23412
Rework the 'Supported Metrics' documentation to improve consistency
access subsections. Details about the `@Timer` annotation have been
pulled into a new section so that they can be referenced rather than
repeated.
See gh-22217
This commit reworks the initial proposal so that jobs and triggers are
treated as first class concepts.
`/actuator/quartz` now returns the group names for jobs and triggers.
`actuator/quartz/jobs` returns the job names, keyed by the available
group names, while `/actuator/quartz/triggers` does the same for
triggers.
`/actuator/jobs/{groupName}` provides an overview of a job group. It
provides a map of job names with the class name of the job.
implementation
`/actuator/triggers/{groupName}` provides an overview of a trigger
group. There are five supported trigger implementations: cron, simple,
daily time interval, calendar interval, and custom for any other
implementation. Given that each implementation has specific settings,
triggers are split in five objects.
`/actuator/jobs/{groupName}/{jobName}` provides the full details of a
particular job. This includes a sanitized data map and a list of
triggers ordered by next fire time.
`/actuator/triggers/{groupName}/{triggerName}` provides the full details
of a particular trigger. This includes the state, its type, and a
dedicate object containing implementation-specific settings.
See gh-10364
Prior to this commit, some exceptions handled at the controller or
handler function level would:
* not bubble up to the Spring Boot error handling support
* not be tagged as part of the request metrics
This situation is inconsistent because in general, exceptions handled at
the controller level can be considered as expected behavior.
Also, depending on how the exception is handled, the request metrics
might not be tagged with the exception.
This will be reconsidered in gh-23795.
This commit prepares a transition to the new situation. Developers can
now opt-in and set the handled exception as a request attribute. This
well-known attribute will be later read by the metrics support and used
for tagging the request metrics with the exception provided.
This mechanism is automatically used by the error handling support in
Spring Boot.
Closes gh-24028
Previously, the auto-configuration for DataSource initialization and
the properties used to configure it were part of the general
DataSource auto-configuration and properties.
This commit moves the auto-configuration of DataSource initialization
out into a separate top-level auto-configuration class. Similarly,
the properties for configuring DataSource initialization have been
moved from `spring.datasource.*` into `spring.sql.init.*`.
The old initialization-related `spring.datasource.*` properties have
been deprecated but can still be used. When they are used, they new,
separate initialization auto-configuration will back off. In other
words, the initialization related `spring.datasource.*` properties
and the `spring.sql.init.*` properties cannot be used in combination.
Closes gh-25323
Polish the prefix support introduced in commit a8592f36d4 and fix a
package tangle between `boot.context.properties.source` and `boot.env`.
The `Prefix` interface has now been moved into a new default method on
`OriginLookup`.
See gh-3450
This commit updates LoggingApplicationListener to register the logging
shutdown hook by default.
The hook is detrimental in a war deployment as it may pin parts of an
application in memory after it has been undeployed. For this reason,
the hook is still disabled by default in war deployments. This is
achieved by setting an attribute on the servlet context in
SpringBootServletInitializer that is then consumed via the Environment
by LoggingApplicationListener.
Closes gh-25046
We configure the `SystemEnvironmentPropertySource` as a `Prefixed` property
source. When adapting this to a `ConfigurationPropertySource, a
`PrefixedConfigurationPropertySource` will be created for it.
A `PrefixedConfigurationPropertySource` will resolve property
such as `foo.bar` to `my.foo.bar` for a prefix of `my`.
Closes gh-3450
Previously, DataSource initialization was triggered via a
BeanPostProcessor or a schema created event from JPA. This caused
numerous problems with circular dependencies, bean lifecycle, etc and
added significant complexity.
This commit reworks DataSource initialization to remove the use of a
BeanPostProcessor entirely. In its place, DataSource initialization is
now driven by an InitializingBean with dependency relationships
between beans ensuring that initialization has been performed before
the DataSource is used. This aligns with the approach that's worked
well with Flyway and Liquibase.
More changes are planned to further simplify DataSource initialization.
The changes in this commit are a foundation for those changes. Any new
public API in this commit is highly likely to change before the next
GA.
Fixes gh-13042
Fixes gh-23736
Currently Spring Integration creates its own `TaskScheduler` bean if one
does not exist in the context yet. When we add `@EnableScheduling`,
Spring Boot auto-configures one for us, but this one comes with slightly
different options than the default in Spring Integration.
This commit makes sure that Spring Integration reuses the
auto-configured TaskScheduler if possible, regardless of the user
opting-in for `@EnabledScheduling`.
See gh-25109
Refine the package restructure started in 91ccc23462 to help provide
a solid foundation for code snippets. This commit renames many of the
classes so that they no longer end in `Example`. It also removes some
of the inner types that were previously used. Many tag comments have
also been moved to ensure that `import` statements are available in
the docs.
Closes gh-25089
Restructure the packages in `spring-boot-docs` so that they mirror
the documentation sections. There are now three main packages:
`springbootfeatures`, `productionreadyfeatures` and `howto`. Each
of the main packages has a subpackage named after the section headings.
Example code now uses consistent `// tag::` names and imports are
applied using `[tag=*]` whenever possible.
Test snippets have been moved to `src/main/java` so that only a single
import attribute needs to be defined.
Closes gh-25089
Update `build.gradle` files to ensure that `junit-platform-launcher` is
a `testRuntimeOnly` dependency. This ensures that tests can be run from
Eclipse.
Closes gh-25074
This commit improves the "Application lifefycle and Probes states"
section and underlines the difference between `AvailabilityState` and
the availability of Probes over HTTP.
Closes gh-24843
This commit adds a customizer hook point for jOOQ's configuration. When
such a bean is present, it is invoked with the auto-configuration
`Configuration`. This effectively supersedes checking for a number of
jOOQ `*Provider`beans. The existing beans are still honoured, in a
deprecated fashion.
Closes gh-24732
This commit changes the default value of bootstrap-mode to "default"
rather than "deferred" so that the JPA infrastructure starts in the
main thread rather than asynchronously.
Closes gh-24249
Prior to this commit, packaging a Spring Boot application as a container
image with Cloud Native Buildpacks could result in unwanted browser
caching behavior, with "Last-Modified" HTTP response headers pointing to
dates in the far past.
This is due to CNB resetting the last-modified date metadata for static
files (for build reproducibility and container layer caching) and Spring
static resource handling relying on that information when serving static
resources.
This commit introduces a new configuration property
`spring.web.resources.cache.use-last-modified` that can be used to
disable this behavior in Spring if the application is meant to run as a
container image built by CNB.
The default value for this property remains `true` since this remains
the default value in Spring Framework and using that information in
other deployment models is a perfectly valid use case.
Fixes gh-24099
Previously, Quartz could be configured with a specific DataSource
using `@QuartzDataSource` but it was not possible to configure a
Quartz-specific transaction manager. This could result in the
different DataSources being used by Quartz itself and Quart'z
DataSourceTransactionManager.
This commit introduces a new qualifier, `@QuartzTransactionManager`,
that can be used to avoid the above-described problem. Any
`@QuartzTransactionManager`-annotated bean will be used by the
Quartz auto-configure configuration instead of the application's main
`TransactionManager`. If no such qualified bean is present, the
application's main TransactionManager, if any, will be used as before.
Fixes gh-20184
This commit removes `<version>` from the Maven Plugin documentation
where it makes sense so that versions aren't hardcoded unnecessarily.
Rather, a plugin or dependency management should be in place so those
are not needed.
Closes gh-23909
Update `OriginTrackedPropertiesLoader` with stricter logic around the
document separator. If the preceding or following lines are comments
then the separator will be ignored.
Closes gh-22963
Update `ConfigTreeConfigDataResource` so that a wildcard suffix can
be used to import multiple folders. The pattern logic from
`StandardConfigDataLocationResolver` has been extracted into a new
`LocationResourceLoader` class so that it can be reused.
Closes gh-22958
Previously, the base path of a servlet-based management server could be
configured using management.server.servlet.context-path but there was no
equivalent property for WebFlux.
This commit introduces a new property, management.server.base-path,
that can be used with both servlet and reactive management servers. The
existing servlet-specific property has been deprecated in favour of the
new general property. When using the servlet stack, if both the general
property and the servlet-specific property are set, the new general
property takes precedence. When using the reactive stack, only the new
general property is considered.
Closes gh-22906
This commit fixes the auto-configuration of Spring Session to use
"server.servlet.session.timeout" as a fallback for Servlet-based web
applications only.
Closes gh-23752
Prior to this commit, the `StaticResourceLocation` for favicons would
point to `"/**/favicon.ico"`. This location does not reflect the current
web development landscape, since the png format and size variants are
not supported here. Also, the `"**"` pattern can be costly at runtime
and is deprecated by the new path pattern support in Spring Framework
(see gh-22833).
This commit changes the default locations to `"/favicon.*","/*/icon-*"`,
supporting common use cases such as `"/favicon.ico"`, `"/favicon.png"`
and `"/icons/icon-48x48.png"`.
Closes gh-23126
Deprecate and provide alternatives for logging properties that are
specific to Logback.
The following Spring Boot properties have been changed:
* logging.pattern.rolling-file-name ->
logging.logback.rollingpolicy.file-name-pattern
* logging.file.clean-history-on-start ->
logging.logback.rollingpolicy.clean-history-on-start
* logging.file.max-size ->
logging.logback.rollingpolicy.max-file-size
* logging.file.total-size-cap ->
logging.logback.rollingpolicy.total-size-cap
* logging.file.max-history ->
logging.logback.rollingpolicy.max-history
As have the system environment properties that they map to:
* ROLLING_FILE_NAME_PATTERN ->
LOGBACK_ROLLINGPOLICY_FILE_NAME_PATTERN
* LOG_FILE_CLEAN_HISTORY_ON_START ->
LOGBACK_ROLLINGPOLICY_CLEAN_HISTORY_ON_START
* LOG_FILE_MAX_SIZE ->
LOGBACK_ROLLINGPOLICY_MAX_FILE_SIZE
* LOG_FILE_TOTAL_SIZE_CAP ->
LOGBACK_ROLLINGPOLICY_TOTAL_SIZE_CAP
* LOG_FILE_MAX_HISTORY ->
LOGBACK_ROLLINGPOLICY_MAX_HISTORY
This commit also cleans up and simplifies `DefaultLogbackConfiguration`.
Closes gh-23609
Prior to this commit, the how-to documentation would say that Spring
Boot does not support the h2c protocol. While it's not supported
out-of-the-box with a configuration property, this protocol can still be
configured using server customizers.
This commit documents, with code snippets, the server customizers one
should use to configure the h2c protocol in an application - for each
supported server.
Closes gh-21997
Refactor `ConfigData` processing code to make it less awkward to
follow.
Prior to this commit the `ConfigDataLocationResolver` would take a
String location and return a `ConfigDataLocation` instance. This was
a little confusing since sometimes we would refer to `location` as the
String value, and sometimes it would be the typed instance. We also
had nowhere sensible to put the `optional:` prefix logic and we needed
to pass a `boolean` parameter to a number of methods. The recently
introduced `Orgin` support also didn't have a good home.
To solve this, `ConfigDataLocation` has been renamed to
`ConfigDataResource`. This frees up `ConfigDataLocation` to be used
as a richer `location` type that holds the String value, the `Orgin`
and provides a home for the `optional:` logic.
This commit also cleans up a few other areas of the code, including
renaming `ResourceConfigData...` to `StandardConfigData...`. It also
introduces a new exception hierarchy for `ConfigDataNotFoundExceptions`.
Closes gh-23711
This commit adds support for Redis cache metrics. Users can opt-in for
statistics using the "spring.cache.redis.enable-statistics" property.
Closes gh-22701
Update all configuration examples in the docs to YAML and make use of
the new `configblocks` spring-asciidoctor-extensions feature to
automatically create both "Properties" and "Yaml" versions.
Closes gh-23515
This commit rework the tip on locating templates when running the app
in the IDE. Using classpath* should not change anything as this won't
make a difference without a pattern in the path.
Closes gh-23068
Rename `@ConfigurationPropertiesImport` to
`@ImportAsConfigurationPropertiesBean` and also refine the registrar
so that it can be used with type directly annotated with
`@ConfigurationProperties`.
Closes gh-23172
Prior to this commit, Actuator would sanitize properties values when
serializing them on the dedicated endpoint. Keys like "password" or
"secret" are entirely sanitized, but other keys like "uri" or "address"
are considered as URI types and only the password part of the user info
is sanitized.
This commit fixes the sanitization process where lists of such URI types
would not match the first entries of the list since they're starting
with `'['`. This commit improves the regexp matching process to sanitize
all URIs within a collection.
The documentation is also updated to better underline the processing
difference between complete sanitization and selective sanitization for
URIs.
Fixes gh-23037
This commit updates the Maven Plugin to filter dependencies based on
the Spring-Boot-Jar-Type entry in their manifest. Jars with a
Spring-Boot-Jar-Type of dependencies-starter or annotation-processor
are excluded.
See gh-22036
Add repeatable `@ImportConfigurationPropertiesBean` annotation that can
be used to import types and treat them as `@ConfigurationProperties`
beans. This annotation is specifically designed to support third-party
classes that can't contain any Spring annotations.
Closes gh-23172
With the introduction of health indicators that only require the
CqlSession, this commit deprecates the health indicators that require
Spring Data since the latter build on top of the former.
Closes gh-23226
Prior to this commit, Spring Boot would auto-configure both
Elasticsearch variants: `RestClient` ("Low Level" client) and
`RestHighLevelClient` ("High Level" client).
Since one can be derived from the other, this would create complex and
unclear situations depending on what developers provided with their
configuration.
`RestHighLevelClient` is mostly for actual use of the Elasticsearch API,
with support for specific methods and (de)serialization. On the other
hand, `RestClient` is merely wrapping the Apache HTTP client for
load-balancing support and low level HTTP features.
This commit completely removes the support for `RestClient` in Spring
Boot and now requires the presence of the
`org.elasticsearch.client:elasticsearch-rest-high-level-client`
dependency for REST client support with Elasticsearch.
Closes gh-22358
This commit builds on top of gh-22603 and exposes data collected by the
`BufferingApplicationStartup` on a dedicated `"/startup"` Actuator
endpoint.
Closes gh-23213
As of spring-projects/spring-framework#24878, Spring Framework provides
an `ApplicationStartup` infrastructure that applications can use to
collect and track events during the application startup phase.
This commit adds a new `BufferingApplicationStartup` implementation that
buffer `StartupStep`s and tracks their execution time. Once buffered,
these steps can be pushed to an external metrics system or drained
through a web endpoint, to a file...
Closes gh-22603
Support a `spring.config.all-locations-optional` property which can be
set to `true` if all config data locations should be considered
optional.
Closes gh-23097
Update config data processing code so that import locations are
mandatory by default. Any import request will now throw a
`ConfigDataLocationNotFoundException` if the specified import
location cannot be found. For optional imports, the user can
use the `optional:` prefix to indicate that the application should
continue to start, even if the location does not exist.
Closes gh-23032
This commit adds a check to the `layertools extract` command to
ensure that the jar file being processed is readable and has a
valid directory.
Fixes gh-22993
Prior to this commit, values from MongoProperties would always
overwrite matching fields in MongoClientSettings. This commit
preserves all values in MongoClientSettings if the client app
provides the MongoClientSettings bean, and only overwrites from
MongoProperties if no MongoClientSettings bean is provided.
Fixes gh-22321
With the upgrade to the new Couchbase SDK and the related changes in
Spring Data Couchbase, CacheManagerCustomizer can no longer be used to
customize the Couchbase cache manager as it is an immutable class.
This commit introduces a dedicated callback for the
CouchbaseCacheManagerBuilder that is used by the auto-configuration and
update the documentation to refer to it with a sample usage.
Closes gh-22573
Prior to this commit, the HTTP/2 server auto-configuration for Jetty
would require Conscrypt as a hard dependency.
This commit updates the auto-configuration for more flexibility and now
allows the following deployments:
* JDK9+ with the JDK ALPN implementation
* JDK8u252+ with the backported ALPN implementation
* Conscrypt with no JDK requirement
The auto-configuration now improves detection and guides developers in
case there is a missing `jetty-alpn-*-server` dependency.
The reference docs in the HOWTO section has been updated accordingly.
Closes gh-22188
This commit adapts the auto-configuration for the new core r2dbc support
in Spring Framework and provides auto-configuration for
R2dbcEntityOperations.
Closes gh-22708
Add support for volume mounted directories where the filename becomes
the property key and the file contents becomes the value.
Support is provided via a dedicated `VolumeMountDirectoryPropertySource`
class which can either be used directly, or via a "volumemount:/..."
`spring.config.import` location.
Closes gh-19990
Co-authored-by: Phillip Webb <pwebb@vmware.com>
Prior to this commit, the application availability infrastructure
would mix the `AvailabilityState`, the `HealthIndicator` and the
`HealthGroup` concepts and would not align with the rest.
This commit auto-configures the livenessState and readinessState
health indicators with the relevant configuration properties.
Unlike other indicators, they are not enabled by default but might
be in future versions.
This also moves the `management.health.probes.enabled` property
to `management.endpoint.health.probes.enabled` since "probes" here
is not a health indicator but rather a configuration flag for the
health endpoint.
Finally, the probes auto-configuration is refined to automatically
add liveness and readiness indicators for the probes group if
they're not already present.
Closes gh-22107
As of Spring Framework 5.3, it is now possible to use `PathPatternParser`
to parse and match request mapping path patterns, as an alternative to
the current default `AntPathMatcher`.
This new implementation has been used for a while in Spring WebFlux and
it’s been designed for consistency and performance.
This commit introduces a new configuration property for opting-in this
new variant:
`spring.mvc.pathmatch.matching-strategy=path_pattern_parser`
The default option is still `ant_path_matcher` for now, but we might
change the default in future versions since Spring Framework considers
it the best choice for modern applications.
There are several behavior differences with this new variant:
* double wildcards `"**"` are rejected when used in the middle patterns,
this is only allowed as the last matching segment in a pattern.
* it is incompatible with some path matching options, like
suffix-pattern, registered-suffix-pattern or configuring a Servlet
prefix on the `DispatcherServlet` (`spring.mvc.servlet.path=/test`)
This commit introduces two `FailureAnalyzer` implementations to guide
developers when facing those issues.
Closes gh-21694
Previously, spring-boot-docs used the java-base-plugin and then added
configuration on top. This has proven to be error prone, with the most
recent problem being that the tests were not being compiled and run.
This commit changes approach and applies the java plugin to the project
instead of the java-base plugin. Now, rather than adding the necessary
configuration to the base, the unwanted pieces of the java plugin's
configuration – specifically the jar and javadoc tasks – are disabled
instead. The DeployedPlugin has also been updated so that it does not
create a publication from the java component for projects that have a
disabled jar task.
Closes gh-22284
Madhura Bhave
Andy Wilkinson
Scott Frederick
izeye
Stephane Nicoll
fml2
Xavier Bouclet
Jay Bryant
Vedran Pavic
Weix Sun
Leo Li
Phillip Webb
Moritz Kammerer
Artem Bilan
deb-von-seggern
Pratik Gupta
Vincent Ricard
Georg Pirklbauer
cdalexndr
dreis2211
Antonin ARQUEY
Dmitriy Bogdanov
Yanming Zhou
Jay Bryant
Berchris Requiao
Brian Clozel
anvithabs
bono007
Nurlan Tembayev
biergit
Cèsar Ordiñana
Andy Clement
Lovekesh Garg
Oliver B. Fischer
Caleb Cushing
Shimizu, Yuko
Niclas Fredriksson
Shannon Carey
Tommy Ludwig
Madhura Bhave
Robert Smith
John Blum
Ramiro Aparicio
Oleg Sukhov
Wesley Ugang
Hatef Palizgar
Justin Bertram
Phillip Webb
Billy T. Hernandez
Stephane Nicoll
Sergey Kolesnikov
Pascal Schumacher
Pushkaraj S
Asha Somayajula
Andy Wilkinson
Thorasine
ketaki-t
thorasine
Pavel Gordon
David Good
Spencer Gibb
Ivo Smid
Scott Frederick
Maciej Walkowiak
smlc
John Franco
Tadaya Tsuyukubo
Madhura Bhave
Sebastiaan Fernandez