Previously, the Spring Boot Gradle plugin would always apply the
application plugin to a project. It then piggy-backed on the application
plugin’s mainClassName and applicationDefaultJvmArgs properties for the
configuration of the bootRun task.
This commit updates the Spring Boot Gradle plugin so that it no longer
applies the application plugin. If the user applies the application
plugin then its configuration will be used, but it’s a no longer
requirement.
Users who do not need the application plugin, but who were using the
mainClassName or applicationDefaultJvmArgs properties will need to
change their builds as a result of this change as those properties will
no longer exist. As before, the mainClassName can be configured on the
springBoot extension:
springBoot {
mainClassName 'com.example.YourApplication'
}
The applicationDefaultJvmArgs property can be used, but it must now be
declared with the project's ext block. For example:
ext {
applicationDefaultJvmArgs = [ '-Dcom.example.property=true' ]
}
Closes gh-2679
Update Tomcat, Jetty and Undertow to serialize session data when the
application is stopped and load it again when the application restarts.
Persistent session are opt-in; either by setting `persistentSession`
on the ConfigurableEmbeddedServletContainer or by using the property
`server.session.persistent=true`.
Fixes gh-2490
Previously, the prefix was spring.embedded-mongodb. This was
inconsistent with the prefixes for Artermis and HornetQ which are
spring.artemis.embedded and spring.hornetq.embedded respectively.
See gh-2002
Embedded MongoDB is now auto-configured when it is on the classpath.
The Mongo instance will listen on the port specified by the
spring.data.mongodb.port property. If this property has a value of
zero and randomly allocated port will be used. In such an event, the
MongoClient created by MongoAutoConfiguration will be automatically
configured to use the port that was allocated.
By default, MongoDB 2.6.10 will be used. This can be configured using
the spring.embedded-mongodb.version property. Mongo's sync delay
feature is enabled by default. This can be configured using the
spring.embedded-mongobd.features property.
Closes gh-2002
Add an explicit note about the need of Spring MVC for actuator HTTP
endpoints. Also explicitly mention Jersey since it can be a source of
confusion.
See gh-2025
Previously, an item could only have a 'deprecated' boolean flag to
indicate that the property is deprecated. It is desirable to provide an
additional description for the deprecation as well as the name of the
property to use instead.
The `deprecated` boolean flag is now supported. Instead, a `deprecated`
object can be specified with two optional attributes: `reason` to provide
an explanation for the deprecation and `replacement` to refer to the
property that should be used instead. If none of them is present, an
empty deprecation object should be set.
For backward compatibility, the `deprecated` field is still set.
Deprecation information can only set via manual meta-data.
Closes gh-3449
This commit adds a new property, spring.jackson.time-zone, that can be
used to configure the time zone that Jackson uses when configuring
dates. It affects the serialisation of both JDK and Joda date types.
Closes gh-3505
This commit enhances the CLI to use the repositories configured in the
profiles declared in a user's Maven settings.xml file during
dependency resolution. A profile must be active for its repositories
to be used.
Closes gh-2703
Closes gh-3483
I think this is safe, judging by the integration tests, but I'm not
putting it in 1.2.x until we've had some feedback on it. The
integration tests actually had a bug that was masking this problem
because they were merging Properties from the whole classpath instead
of picking the first available resource (which is generally what
we do in Spring Boot applications for application.properties for
instance).
Fixes gh-3048
Liquibase has a `changeLog` property that is definitely used as a
`Resource` but cannot be defined as such as the original String value
should be kept against an API we don't control.
Update the tests also to make it more clear that if hints are added
against a property that is detected automatically, said property still
keeps all its auto-discovered capabilities.
Closes gh-3457
Update AbstractLoggingSystem to pass LoggingInitializationContext to
loadDefaults() method to enable access to the environment.
DefaultLogbackConfiguration now uses this to find log pattern overrides.
Fixes gh-3367
Closes gh-3405
Replace the enum provider by a more general purpose provider that can
substitute the type of the property for the purpose of auto-completing
the values.
"handle-as" can be used for enums but for any type that the IDE
understands such as locale, charset, mime-type and Spring's resource
abstraction.
Closes gh-3457
Add ApplicationArguments interface which allows SpringApplication.run
arguments to be injected into any bean. The interface provides access
to both the raw String[] arguments and also provides some convenience
methods to access the parsed 'option' and 'non-option' arguments.
A new ApplicationRunner interface has also been added which is
similar to the existing CommandLineRunner.
Fixes gh-1990
Add support for the following server properties which can be used to
configure the session:
server.session.tracking-modes
server.session.cookie.name
server.session.cookie.domain
server.session.cookie.path
server.session.cookie.comment
server.session.cookie.http-only
server.session.cookie.secure
server.session.cookie.max-age
In addition `server.session-timeout` is now deprecated and has been
replaced with `server.session.timeout`.
Fixes gh-3240
Unfortunately, we have no other choice to flip the ignoreUnknownFields
attribute of `SecurityProperties` has many different target are now set
for that namespace outside the class. See gh-3445 for a potential way
to improve that.
Closes gh-3327
Use AbstractTemplateViewResolverProperties as the base class for
GroovyTemplateProperties since the Spring GroovyMarkupViewResolver is
an AbstractTemplateViewResolver.
The auto-configuration for Groovy is now more aligned with the existing
Freemarker and Velocity auto-configuration, with a `resourceLoaderPath`
property being used instead of `prefix`.
Fixes gh-3365
Closes gh-3374
Previously, all attempts to log a configuration file were logged at DEBUG
level which lead to a lot of noise as Spring Boot looks in many places by
default.
We now only log the files that are effectively found at DEBUG level and
all failed attempts at TRACE level.
Closes gh-3129
If a `JavaMailSenderImpl` is available, check that the underlying mail
server is available on startup. Add a `spring.mail.test-connection`
property to control this behaviour.
Closes gh-3408
If spring-hateoas is on the classpath and an MvcEndpoint returns a
@ResponseBody it will be extended and wrapped into a Resource with links.
All the existing endpoints that return sensible JSON data can be extended
this way (i.e. not /logfile). The HAL browser will also be added as an
endpoint if available on the classpath. Finally, asciidocs for the
Actuator endpoints are available as a separate jar file, which if
included in an app will also generate a new (HTTP) endpoint.
Fixes gh-1390
There is a new spring.factories entry for
org.springframework.boot.actuate.autoconfigure.EndpointWebMvcConfiguration
which loads extra beans into the MVC config for the Actuator.
If the management context is a child context all the beans go in the
child (except the Spring Security filter still). A big bonus is that
you can add WebConfigurerAdapters to configure static resources etc.
A new component called ManagementContextResolver can be used to
locate the ApplicationContext for the MVC endpoints.
Fixes gh-3345
This commit improves support of the Resource Handling features
introduced in Spring Framework 4.1. Those features add new ways to
resolve and transform static resources in applications.
See [this blog
post](https://spring.io/blog/2014/07/24/spring-framework-4-1-handling-static-web-resources)
for more details.
The `ResourceUrlEncodinFilter` is added for compatible template engines:
Velocity and Thymeleaf. It assists them with rewriting the URLs of
static resources when rendering templates.
New keys are added in the `ResourceProperties` in order to configure
the Resource Handling chain. `ResourceResolvers` and
`ResourceTransformers` are registered accordingly in
`WebMvcAutoConfiguration`.
Here is an example of enabling a `ContentVersionStrategy` on all
static resources, meaning their names will be changed for cache
busting purposes by adding a content hash at the end of the file name.
Like "/js/jquery.js -> /js/jquery-872ca6a9fdda9e2c1516a84cff5c3bc6.js".
```
spring.resources.chain.enabled:true
spring.resources.chain.strategy.content.enabled:true
spring.resources.chain.strategy.content.paths:/**
```
Closes gh-1604
Closes gh-3123
Improve the "hints" section of the metadata so that each hint can provide
the reference to a value provider.
A value provider defines how a tool can discover the potential values of
a property based on the context. The provider is identifed by a name and
may have an arbitrary number of parameters.
Closes gh-3303
Update documentation section that discusses uber jars since it conflates
the concepts of the uber jar and the shading of dependencies into jars
(which may or may not be true uber jars).
Fixes gh-3321
Create a new section in the meta-data called "hints" where users can
provide hints about a given property. The most basic use case for now
is to provide a list of values that a property can have. Each value may
have a description.
This sample JSON provides a basic example for a property called `foo.mode`
that exposes 3 values: "auto", "basic" and "advanced".
```
"hints": [
{
"id": "foo.mode",
"values": [
{
"value": "auto",
"description": "Some smart description."
},
{
"name": "basic"
},
{
"name": "advanced"
}
]
}
]
```
This information can be read by tools (such as IDE) and offer an
auto-completion with the list of values.
Closes gh-2054
Add AnsiPropertySource which allows named ANSI codes to be resolved
and update ResourceBanner to include it.
This commit also deprecates constants defined in AnsiElement and
replaces them with AnsiStyle, AnsiColor and AnsiBackground enums.
Closes gh-2704
These files are modified by Eclipse for some reason when you change files
like Thymeleaf HTML files. `META-INF/maven/**` has been added to the
default exclusion.
Closes gh-3295
Closes gh-3297
Update `ApplicationPidFileWriter` to support a 'fail on write error'
properties which allows the user to exit the application if the PID
file cannot be written.
This commit also deprecates `spring.pidfile` in favor of
`spring.pid.file` so that the new property can be added without overlap.
Fixes gh-2764
This commit adds support for automatically configuring Spring Session.
In a web application when both Spring Session and Spring Data Redis
are on the classpath, Spring Session's Redis Http Session support
will be auto-configured. The max inactive interval for Redis-backed
sessions can be configured via the environment using the existing
server.session-timeout property.
Closes gh-2318
Migrate `spring.view.prefix` and `spring.view.suffix` to
`spring.mvc.view.prefix` and `spring.mvc.view.suffix` respectively. The
former properties are still handled in a backward compatible way and are
defined as deprecated in the meta-data.
Closes gh-3250
Improve SpringApplicationAdminMXBean to expose additional information:
* Whether the application uses an embedded container
* The properties exposed by the `Environment`
This allows to know if the application is web-based and the HTTP port
on which it is running.
Closes gh-3067
Previously, the actual HTTP port on which a web application is running on
was only exposed in tests. This commit makes sure to provide that feature
regardless of the environment so that applications can know on which port
they are actually running on.
If there are several containers, each is exposed via the namespace of
their respective application context.
Closes gh-3259
Add a new `spring.mvc.async.request-timeout` property which can be used
to configure AsyncSupportConfigurer.setDefaultTimeout(..).
Fixes gh-2900
Closes gh-3236
for users to get started. It also makes it more flexible if different
aggregation keys are needed depending on the environment. The most
important new feature is the
spring.metrics.export.redis.aggregateKeyPattern configuration, which
fits the *.redis.key and prefix defaults. The aggregate reader uses
a prefix based on the key by default, with a naming convention that
the key starts with "keys.".
Update the Maven and Gradle repackage tasks so that the embedded
startup script is no longer included by default. This change is
primarily due to the `cf` command line not currently accepting
the unusual jar format.
Fixes gh-3045
Users can add @ExportMetric[Reader,Writer] to readers and writers that
they want to participate in the default exporter. There is also still an
@ActuatorMetricWriter that is used for the legacy (non-Java8) Gauge and
CounterServices.
The redis export and aggregate use case is a lot nicer with this
shared data between the two component types.
Also made MetricExportProperties itself a Trigger (so the default
delay etc. can be configured via spring.metrics.export.*).
Remove `spring.cache.config` as it is too generic and does not express
enough what is configured. This property is replaced by cache library
specific properties, that is `spring.cache.ehcache.config`,
`spring.cache.hazelcast.config`, `spring.cache.infinispan.config` and
`spring.cache.jcache.config`.
See gh-2633
Allow SSL to be configured via standard configuration as well as the
requestedHeartbeat. Switch to RabbitConnectionFactoryBean.
Closes gh-2655, gh-2676
User can enable OAuth2 SSO by declaring the intent (@EnableOAuth2Sso)
and also configuring the client properties (spring.oauth2.client.*).
The spring.oauth2.sso.* are only needed to change the path for the
login (defaults to /login) - any other security configuration for the
protected resources can be added in a WebSecurityConfigurerAdapter
which carries the @EnableOAuth2Sso annotation.
- Apply project’s code formatting and conventions
- Don’t use the IO and worker thread configuration when creating the
worker for the AccessLogReceiver. The IO and worker thread
configuration is for HTTP request processing and a worker in its
default configuration should be sufficient for the access log
receiver.
- Don’t use a temporary directory as the default for the access log
directory. A temporary directory makes (some) sense for Tomcat as it
requires a directory for its basedir. Undertow has no such
requirement and using a temporary directory makes it hard to locate
the logs. The default has been updated to a directory named logs,
created in the current working directory.
- Document the new properties in the application properties appendix
Closes gh-3014
Allow the display-name of the application to be customized when deployed
in an embedded container via the `server.display-name` property.
Closes gh-2600
This commit adds CORS support to the Actuator’s MVC endpoints. CORS
support is disabled by default and is only enabled once the
endpoints.cors.allowed-origins property has been set.
The new properties to control the endpoints’ CORS configuration are:
endpoints.cors.allow-credentials
endpoints.cors.allowed-origins
endpoints.cors.allowed-methods
endpoints.cors.allowed-headers
endpoints.cors.exposed-headers
The changes to enable Jolokia-specific CORS support (57a51ed) have been
reverted as part of this commit. This provides a consistent approach
to CORS configuration across all endpoints, rather than Jolokia using
its own configuration.
See gh-1987
Closes gh-2936
Different physical sources for the same logical metric just need to
publish them with a period-separated prefix, and this reader will
aggregate (by truncating the metric names, dropping the prefix).
Very useful (for instance) if multiple application instances are
feeding to a central (e.g. redis) repository and you want to
display the results. Useful in conjunction with a
MetricReaderPublicMetrics for hooking up to the /metrics endpoint.
This seems pretty efficient (approx 12M write/s as opposed to 2M with
the DefaultCounterService). N.B. there is no need to change most of
the rest of the metrics stuff because metrics are write-often, read-
seldom, so we don't need high performance reads as much.
The Spring Integration configuration and Dropwizard support has changed
a bit. Functionally very similar and probably opaque to users, but now
the messaging operates as an Exporter on a @Scheduled method, and
Dropwizard is a replacement [Gauge,Counter]Service.
Metrics are all
collected live in-memory (and can be very fast with Java 8), buffered
there and shipped out to a MessageChannel (if one exists with id
"metricsChannel") in a background thread.
We can still use Java 8 library APIs (like LongAdder) but to compile
to java 7 compatible byte code we have to forgo the use of lambdas :-(
and shorthand generics (<>).
Fixes gh-2682, fixes gh-2513 (for Java 8 and Dropwizard users).
Some of the features of the launch.script were not exposed for users
to be able to control at runtime. It now accepts things like
PID_FOLDER and LOG_FOLDER as environment variables, and also adopts
a clear naming convention where only the inputs are UPPER_CASE.
For reasons that I don’t understand, Maven has decided to stop running
the javadoc:jar task as part of the package phase. It appears to be
related to the addition of the build-helper plugin in
spring-boot-dependencies. Binding javadoc:jar to the prepare-package
phase convinces Maven to run it, apparently without any unwanted side
effects.
Previously, the CLI’s dependency management used proprietary Properties
file-based metadata to configure its dependency management. Since
spring-boot-gradle-plugin’s move to using the separate dependency
management plugin the CLI was the only user of this format.
This commit updates the CLI to use Maven boms to configure its
dependency management. By default it uses the spring-boot-dependencies
bom. This configuration can be augmented and overridden using the new
@DependencyManagementBom annotation which replaces @GrabMetadata.
Closes gh-2688
Closes gh-2439
This reverts commit b1c0a7cda4.
The plugin publishing process has moved to a new plugin-based approach
that brings with it some significant limitations:
- There's no staging to allow the promotion of good release builds
- There's no easy way to upload an existing artifact
- There's no control over the published pom.
The risk brought by these limitations, particularly the first, are
too great so we will no be publishing the Boot plugin to the Portal
until they're resolved.
Changing the plugin's ID was a breaking change that would require
users to do some work when they upgrade to Boot 1.3. The ID of the
plugin was changed purely so that it met the Portal's requirements.
Given that the plugin will not be published to the Portal for the
foreseaable future there's no need for us to inflict a breaking change
on people when there will be no benefit.
See gh-1567
Add an entry for `flyway.*` to make it more explicit that any public
property of the auto-configured `Flyway` object can be set via the
`flyway` prefix.
Closes gh-2667
- Nest the configuration class in HealthIndicatorAutoConfiguration,
bringing it into line with the other health indicator configuration
classes
- Include the statistics from the response in the health’s details
- Map YELLOW to UP rather than UNKNOWN as it indicates that the cluster
is running but that “the primary shard is allocated but replicas are
not” [1]. The details can be used to determine the precise state of
the cluster.
- Add a property to configure the time that the health indicator will
wait to receive a response from the cluster
- Document the configuration properties
- Update the tests to cover the updated functionality
See gh-2399
[1] http://www.elastic.co/guide/en/elasticsearch/reference/1.x/cluster-health.html
This commit adds support for configuring an ObjectMapper's
serialization inclusion using the environment via the
spring.jackson.serialization-inclusion property. The property's value
should be one of the values on the JsonInclude.Include enumeration.
Relaxed binding of the property value to the enum is supported. For
example:
spring.jackson.serialization-inclusion: non_null
Closes gh-2532
Initial update to the documentation to mention how a 3rd party starter
should be named. The current doc sends a completely inconsistent message
to what we actually intend.
See gh-2537
Gradle’s plugin portal requires each plugin’s ID to be in a namespace.
Our existing ID, spring-boot, does not meet this requirement. This
commit changes the plugin’s ID to org.springframework.boot.spring-boot.
Note that, as is recommended [1], the plugin’s ID does not include
“gradle”.
See gh-1567
[1] http://plugins.gradle.org/submit
This commit replaces Spring Boot's basic dependency management support
with separate dependency management plugin. This has a number of
benefits including:
1. A Maven bom can be used rather than a custom properties file
2. Dependency management is applied transitively rather than only to
direct dependencies
3. Exclusions are applied as they would be in Maven
4. Gradle-generated poms are automatically configured with the
appropriate dependency management
Closes gh-2133
Previously, only a handful of properties could be set when
auto-configuring an Elasticsearch client. This commit introduces support
for configuring arbitrary properties using the
spring.data.elasticsearch.properties prefix. For example,
client.transport.sniff can be configured using
spring.data.elasticsearch.properties.client.transport.sniff.
Closes gh-1838
Previously, a TransportClient sniff property could not be configured
while using Spring Boot’s Elasticsearch auto-configuration. This commit
adds a new property, spring.data.elasticsearch.client-transport-sniff,
that can be used to configure the TransportClient while continuing to
use the auto-configuration support.
Closes gh-1838
Add an event that indicates the Spring Application has fully started and
is now ready to service requests. While ContextRefreshEvent provides
such hook for a regular spring application, this dedicated event is
triggered once all callbacks have been processed and right before the
context is returned to the caller. Besides, such event is triggered once
per application, regardless of the number of (child) contexts that could
have been created.
Closes gh-2638
Rename RepositoryRestMvcBootConfiguration to
SpringBootRepositoryRestMvcConfiguration so that it follows the same
naming pattern as other custom Spring Boot configurations.
See gh-2392
- Correct typo (coercable -> coercible)
- Update description to reflect that Spring 4.1.5 supports the
expansion of array properties and and a test that verifies the
behaviour
If an application defines a custom RepositoryRestMvcConfiguration, all
Spring Boot defaults are lots. While this sounds sensible, it can be
confusing as Spring Boot exposes properties (`spring.data.rest.*`) that
are no longer honored.
RepositoryRestMvcBootConfiguration is now public and can be used as an
extension point for those who need to customize the Spring Data REST
configuration and keep boot's specific defaults.
Fixes gh-2392
The Maven plugin allows spring-boot:run to be configured so that
resources are loaded from their output location rather than from
src/main/resources. This commit adds an equivalent configuration
option to the Gradle plugin. To disable source resources from being
added to the classpath in place of those in the output location
the configure the bootRun tasks like this:
bootRun {
addResources = false
}
Closes gh-2431
This commit adds support for configuring the XA DataSource and
ConnectionFactory pools created by Atomikos and Bitronix via the
environment. The property prefixes vary depending on the transaction
manager that’s in use. They are:
Bitronix:
- spring.jta.bitronix.datasource
- spring.jta.bitronix.connectionfactory
Atomikos:
- spring.jta.atomikos.datasource
- spring.jta.atomikos.connectionfactory
The configuration processor has been updated to ignore
javax.jms.XAConnectionFactory and javax.sql.XADataSource as neither of
these types can be created via property binding.
Closes gh-2027
This commit adds support for configuring Log4j 2 with YAML. It also
improves the existing support for configuring Log4j 2 with JSON.
Previously, Log4J2LoggingSystem returned a hard-coded list of standard
config locations that includes both JSON and XML file suffixes. Log4j
2’s support for JSON configuration files requires Jackson’s ObjectMapper
to be on the classpath so, in its absence, the standard config locations
were incorrect.
This commit updates Log4J2LoggingSystem to return an array of standard
config locations based on what’s on the classpath. It also updates the
documentation to describe the additional dependencies that are required
to enable YAML or JSON-based configuration.
Closes gh-2239
If user runs an executable archive then it and its lib directory will be
on the classpath. Entries from loader.path take precedence in a way that
should make sense to users (earlier wins like in CLASSPATH env var).
Also added new integration tests to verify the behaviour (big improvement
on the old ones, which probably aought to be beefed up to the same
standard).
Fixes gh-2314
Previously, the documentation only provided examples of the required
configuration for Maven users. This commit adds equivalent configuration
snippets for those using Gradle. It also removes the recommendation to
override the version of the Servlet API as this is unnecessary. The pom
files for the Jetty 8 and Tomcat 7 samples have also been updated
accordingly.
Closes gh-2346
Add `@WebIntegrationTest` which is similar to `@IntegrationTest` and
`@WebAppConfiguration`. The annotation using Spring's `@BootstrapWith`
annotation rather than `@TestExecutionListeners` which allows it to
work when `@TestExecutionListeners` (even ServletTestExecutionListener)
are declared on the test class.
This annotation is particularly useful for TestNG users that extend
Spring's `AbstractTestNGSpringContextTests` class.
Fixes gh-2299
See gh-1956
See gh-2135
The "Customizing ConfigurableEmbeddedServletContainer directly"
section should use `HttpStatus.NOT_FOUND` and not `HttpStatus.404` in
the sample code.
Fixes gh-2258
Update HypermediaAutoConfiguration to apply the Jackson2HalModule to
the primary ObjectMapper. This restores the behavior of Spring Boot
1.1 where HATEOAS types could be serialized for both `application/json`
and `application/json+hal` content types.
A `spring.hateoas.apply-to-primary-object-mapper` property has also been
provided to opt-out if necessary.
Fixes gh-2147
Actually collection types are not harmonized to their interface
counterpart; this was implemented in the first proposal but wasn't
applied in the final review.
See gh-2206
Previously, no configuration properties were discovered on a class using
lombok instead of regular getters/setters.
This commit adds a support for some of the lombok annotations,
specifically that is @Data, @Getter and @Setter. Provides the same
semantic as what lombok is generating.
Closes gh-2114
Update the file log pattern to write the thread name after the `---`
separator. The allows both file and console logs to be parsed in the
same way.
Fixes gh-2136
Refactor LoggingApplicationListener and LoggingSystem to restore
Spring Boot 1.1 logging behavior. The LOG_FILE and LOG_PATH system
properties are now set before configuring the logger.
The `logging.path` property is now once again optional and will not be
used when `logging.file` is specified. The documentation has also been
updated to reflect the changes.
Fixes gh-2121
Fixes gh-2117
Health indicator configuration keys have moved from the health.* to the
management.health.* namespace. This commit adds an explicit reference
to the previous location.
See gh-2128
Health indicator configuration keys have moved from the health.* to the
management.health.* namespace. This commit makes sure that these are
documented properly in 1.1.x as well.
See gh-2118
Update AbstractEndpoint so that the `enable` property is optional and
when it not specified the `endpoints.enabled` property will be used.
This allows users to switch the way that endpoints are enabled. Rather
than opting-out specific endpoint enablement the `endpoints.enabled`
property can be set to `false` and specific endpoints can be opted-in.
Fixes gh-2102
Lucas Saldanha
Andy Wilkinson
Phillip Webb
Stephane Nicoll
izeye
Sebastien Deleuze
Dave Syer
Andrew Landsverk
Ivan Sopov
Rob Baily
Melvin Kicchi
Marten Deinum
Eddú Meléndez
Spring Buildmaster
Matt Benson
Brian Clozel
Ralph Schaer
Johannes Stelzer
Geoffrey Chandler
cohee016
Tomasz Przybyła
Artur Mkrtchyan
John Tims
ceilfors
Josh Thornhill
Phil Parker
Joe Kutner
yinheli
Kamil Szymanski
Marcin Zajączkowski
Marcel Overdijk
Eric Dahl
Maciej Walkowiak
StevenGeens
Russell Allen
Nils Breunese
pauldub
Hendy Irawan