This commit provides a single endpoint, /actuator, that serves HTML
(the HAL browser) or JSON depending on the request’s accept header
that enables discovery of all of the actuator’s other endpoints.
When the management context path is configured, the /actuator endpoint
moves to the configured path, e.g. if the management context path is
set to /management, the actuator endpoint will be available from
/management.
Closes gh-3696
This commit adds a new property, logging.exception-conversion-word,
that can be used to configure the conversion word that is used when
logging exceptions. The default value, %rEx, will log exceptions
with the root cause first and include class packaging information in
the stack trace. The new property is supported when using either
Logback or Log4J2.
Closes gh-3684
Harmonize the configuration properties for Undertow to match the changes
made for gh-2491.
Move `spring.undertow.accessLog*` to `spring.undertow.accesslog.*`
Add `directory`, `prefix` and `suffix` properties to further customize
how access logs are configured on Tomcat. Relocate all properties to the
`server.tomcat.accesslog` namespace.
`server.tomcat.accessLogPattern` and `server.tomcat.accessLogEnabled` are
deprecated and replaced by `server.tomcat.accesslog.pattern` and
`server.tomcat.accesslog.enabled` respectively.
Closes gh-2491
Previously, only folders on the classpath would be watched and used
to trigger a restart/reload of the application. This commit adds a
new property spring.devtools.restart.additional-paths that can be
used to configure additional paths that should be watched for
changes. When a change occurs in one of those paths a restart or
reload will be triggered, depending on the full restart exclude
patterns configured via the existing spring.devtools.restart.exclude
property.
Closes gh-3469
Three conditions must be met for the console to be enabled:
- H2 is on the classpath
- The application is a web application
- spring.h2.console.enabled is set to true
If spring-boot-devtools is on the classpath, spring.h2.console.enabled
will be set to true automatically. Without the dev tools, the enabled
property will have to be set to true in application.properties.
By default, the console is available at /h2-console. This can be
configured via the spring.h2.console.path property. The value of this
property must begin with a '/'.
When Spring Security is on the classpath the console will be secured
based on the user's security.* configuration. When the console is
secured, CSRF protection is disabled and frame options is set to
SAMEORIGIN for its path. Both settings are required in order for the
console to function.
Closes gh-766
The `bootRun` gradle task or `spring-boot:run` maven goal can be used to
start a Spring Boot app with DevTools as long as forking is enabled. Add
an explicit note in the documentation to mention that.
Closes gh-3315
Add an auto-configuration that avoid a Spring Boot user to add
`@EnableConfigurationProperties` to its configuration to benefit from
that feature.
As our own auto-configurations are tested independently, such annotation
is still present to avoid a useless reference to this new
auto-configuration.
Closes gh-2457
Add `spring.autoconfigure.exclude` to control the list of
auto-configuration classes to exclude via configuration. Merge the
exclusions defined on the `@EnableAutoConfiguration` or
`@SpringBooApplication` if any.
Closes gh-2435
Add a "management.health.defaults.enabled" property that controls whether
the default health indicators are enabled. This allow to disable them all
by default and still enable individual ones using their respective
specific property.
Closes gh-2298
Currently, the default TemplateResolver had no specific order. Thymeleaf
handles that with a "always first" strategy (that can be confusing if
several TemplateResolver have a "null" order.
While it is a fine default (and changing it could lead to weird side
effects), it has to be changed as soon as another TemplateResolver bean
is defined in the project.
The `spring.thymeleaf.template-resolver-order` property has been added to
control the order of the default TemplateResolver.
Closes gh-3575
Allow to disable the auto-startup flag of the default JMS and RabbitMQ
containers. This effectively permit to disable automatic listening via
configuration.
Closes gh-3587
A RepositoryRestMvcConfiguration subclass provided by a user is
problematic in a Spring Boot application as it causes
RepositoryRestMvcConfiguration's bean declarations to be processed
before any auto-configuration runs.
One problem that this causes is that it switches off Boot's Jackson
auto-configuration due to RepositoryRestMvcConfiguration having
already declared multiple ObjectMapper beans. Unlike Boot's
auto-configured ObjectMapper, none of these ObjectMappers are marked
as @Primary. This then leads to wiring failures due to multiple
candidates being available.
To address this problem a new RepositoryRestConfigurer abstract has been
introduced in Spring Data Gosling. Its use is now strongly preferred
over subclassing RepositoryRestMvcConfiguration. Note that our own
RepositoryRestMvcConfiguration subclass remains. It is imported as part
of auto-configuration (avoiding the ordering problems described above),
and provides configuration properties binding for
RepositoryRestConfiguration. However, the Jackson ObjectMapper
configuration has been moved out into a new RepositoryRestConfigurer
implementation.
While SpringBootRepositoryRestMvcConfiguration remains, this commit
makes it package private to discourage users from subclassing it. While
this may break existing applications, it, coupled with the documentation
updates, will hopefully guide them toward using
RepositoryRestConfigurer.
Closes gh-3439
Previously, the Spring Boot Gradle plugin would always apply the
application plugin to a project. It then piggy-backed on the application
plugin’s mainClassName and applicationDefaultJvmArgs properties for the
configuration of the bootRun task.
This commit updates the Spring Boot Gradle plugin so that it no longer
applies the application plugin. If the user applies the application
plugin then its configuration will be used, but it’s a no longer
requirement.
Users who do not need the application plugin, but who were using the
mainClassName or applicationDefaultJvmArgs properties will need to
change their builds as a result of this change as those properties will
no longer exist. As before, the mainClassName can be configured on the
springBoot extension:
springBoot {
mainClassName 'com.example.YourApplication'
}
The applicationDefaultJvmArgs property can be used, but it must now be
declared with the project's ext block. For example:
ext {
applicationDefaultJvmArgs = [ '-Dcom.example.property=true' ]
}
Closes gh-2679
Update Tomcat, Jetty and Undertow to serialize session data when the
application is stopped and load it again when the application restarts.
Persistent session are opt-in; either by setting `persistentSession`
on the ConfigurableEmbeddedServletContainer or by using the property
`server.session.persistent=true`.
Fixes gh-2490
Previously, the prefix was spring.embedded-mongodb. This was
inconsistent with the prefixes for Artermis and HornetQ which are
spring.artemis.embedded and spring.hornetq.embedded respectively.
See gh-2002
Embedded MongoDB is now auto-configured when it is on the classpath.
The Mongo instance will listen on the port specified by the
spring.data.mongodb.port property. If this property has a value of
zero and randomly allocated port will be used. In such an event, the
MongoClient created by MongoAutoConfiguration will be automatically
configured to use the port that was allocated.
By default, MongoDB 2.6.10 will be used. This can be configured using
the spring.embedded-mongodb.version property. Mongo's sync delay
feature is enabled by default. This can be configured using the
spring.embedded-mongobd.features property.
Closes gh-2002
Add an explicit note about the need of Spring MVC for actuator HTTP
endpoints. Also explicitly mention Jersey since it can be a source of
confusion.
See gh-2025
Previously, an item could only have a 'deprecated' boolean flag to
indicate that the property is deprecated. It is desirable to provide an
additional description for the deprecation as well as the name of the
property to use instead.
The `deprecated` boolean flag is now supported. Instead, a `deprecated`
object can be specified with two optional attributes: `reason` to provide
an explanation for the deprecation and `replacement` to refer to the
property that should be used instead. If none of them is present, an
empty deprecation object should be set.
For backward compatibility, the `deprecated` field is still set.
Deprecation information can only set via manual meta-data.
Closes gh-3449
This commit adds a new property, spring.jackson.time-zone, that can be
used to configure the time zone that Jackson uses when configuring
dates. It affects the serialisation of both JDK and Joda date types.
Closes gh-3505
This commit enhances the CLI to use the repositories configured in the
profiles declared in a user's Maven settings.xml file during
dependency resolution. A profile must be active for its repositories
to be used.
Closes gh-2703
Closes gh-3483
I think this is safe, judging by the integration tests, but I'm not
putting it in 1.2.x until we've had some feedback on it. The
integration tests actually had a bug that was masking this problem
because they were merging Properties from the whole classpath instead
of picking the first available resource (which is generally what
we do in Spring Boot applications for application.properties for
instance).
Fixes gh-3048
Liquibase has a `changeLog` property that is definitely used as a
`Resource` but cannot be defined as such as the original String value
should be kept against an API we don't control.
Update the tests also to make it more clear that if hints are added
against a property that is detected automatically, said property still
keeps all its auto-discovered capabilities.
Closes gh-3457
Update AbstractLoggingSystem to pass LoggingInitializationContext to
loadDefaults() method to enable access to the environment.
DefaultLogbackConfiguration now uses this to find log pattern overrides.
Fixes gh-3367
Closes gh-3405
Replace the enum provider by a more general purpose provider that can
substitute the type of the property for the purpose of auto-completing
the values.
"handle-as" can be used for enums but for any type that the IDE
understands such as locale, charset, mime-type and Spring's resource
abstraction.
Closes gh-3457
Add ApplicationArguments interface which allows SpringApplication.run
arguments to be injected into any bean. The interface provides access
to both the raw String[] arguments and also provides some convenience
methods to access the parsed 'option' and 'non-option' arguments.
A new ApplicationRunner interface has also been added which is
similar to the existing CommandLineRunner.
Fixes gh-1990
Add support for the following server properties which can be used to
configure the session:
server.session.tracking-modes
server.session.cookie.name
server.session.cookie.domain
server.session.cookie.path
server.session.cookie.comment
server.session.cookie.http-only
server.session.cookie.secure
server.session.cookie.max-age
In addition `server.session-timeout` is now deprecated and has been
replaced with `server.session.timeout`.
Fixes gh-3240
Unfortunately, we have no other choice to flip the ignoreUnknownFields
attribute of `SecurityProperties` has many different target are now set
for that namespace outside the class. See gh-3445 for a potential way
to improve that.
Closes gh-3327
Use AbstractTemplateViewResolverProperties as the base class for
GroovyTemplateProperties since the Spring GroovyMarkupViewResolver is
an AbstractTemplateViewResolver.
The auto-configuration for Groovy is now more aligned with the existing
Freemarker and Velocity auto-configuration, with a `resourceLoaderPath`
property being used instead of `prefix`.
Fixes gh-3365
Closes gh-3374
Previously, all attempts to log a configuration file were logged at DEBUG
level which lead to a lot of noise as Spring Boot looks in many places by
default.
We now only log the files that are effectively found at DEBUG level and
all failed attempts at TRACE level.
Closes gh-3129
If a `JavaMailSenderImpl` is available, check that the underlying mail
server is available on startup. Add a `spring.mail.test-connection`
property to control this behaviour.
Closes gh-3408
If spring-hateoas is on the classpath and an MvcEndpoint returns a
@ResponseBody it will be extended and wrapped into a Resource with links.
All the existing endpoints that return sensible JSON data can be extended
this way (i.e. not /logfile). The HAL browser will also be added as an
endpoint if available on the classpath. Finally, asciidocs for the
Actuator endpoints are available as a separate jar file, which if
included in an app will also generate a new (HTTP) endpoint.
Fixes gh-1390
There is a new spring.factories entry for
org.springframework.boot.actuate.autoconfigure.EndpointWebMvcConfiguration
which loads extra beans into the MVC config for the Actuator.
If the management context is a child context all the beans go in the
child (except the Spring Security filter still). A big bonus is that
you can add WebConfigurerAdapters to configure static resources etc.
A new component called ManagementContextResolver can be used to
locate the ApplicationContext for the MVC endpoints.
Fixes gh-3345
This commit improves support of the Resource Handling features
introduced in Spring Framework 4.1. Those features add new ways to
resolve and transform static resources in applications.
See [this blog
post](https://spring.io/blog/2014/07/24/spring-framework-4-1-handling-static-web-resources)
for more details.
The `ResourceUrlEncodinFilter` is added for compatible template engines:
Velocity and Thymeleaf. It assists them with rewriting the URLs of
static resources when rendering templates.
New keys are added in the `ResourceProperties` in order to configure
the Resource Handling chain. `ResourceResolvers` and
`ResourceTransformers` are registered accordingly in
`WebMvcAutoConfiguration`.
Here is an example of enabling a `ContentVersionStrategy` on all
static resources, meaning their names will be changed for cache
busting purposes by adding a content hash at the end of the file name.
Like "/js/jquery.js -> /js/jquery-872ca6a9fdda9e2c1516a84cff5c3bc6.js".
```
spring.resources.chain.enabled:true
spring.resources.chain.strategy.content.enabled:true
spring.resources.chain.strategy.content.paths:/**
```
Closes gh-1604
Closes gh-3123
Improve the "hints" section of the metadata so that each hint can provide
the reference to a value provider.
A value provider defines how a tool can discover the potential values of
a property based on the context. The provider is identifed by a name and
may have an arbitrary number of parameters.
Closes gh-3303
Update documentation section that discusses uber jars since it conflates
the concepts of the uber jar and the shading of dependencies into jars
(which may or may not be true uber jars).
Fixes gh-3321
Create a new section in the meta-data called "hints" where users can
provide hints about a given property. The most basic use case for now
is to provide a list of values that a property can have. Each value may
have a description.
This sample JSON provides a basic example for a property called `foo.mode`
that exposes 3 values: "auto", "basic" and "advanced".
```
"hints": [
{
"id": "foo.mode",
"values": [
{
"value": "auto",
"description": "Some smart description."
},
{
"name": "basic"
},
{
"name": "advanced"
}
]
}
]
```
This information can be read by tools (such as IDE) and offer an
auto-completion with the list of values.
Closes gh-2054
Add AnsiPropertySource which allows named ANSI codes to be resolved
and update ResourceBanner to include it.
This commit also deprecates constants defined in AnsiElement and
replaces them with AnsiStyle, AnsiColor and AnsiBackground enums.
Closes gh-2704
These files are modified by Eclipse for some reason when you change files
like Thymeleaf HTML files. `META-INF/maven/**` has been added to the
default exclusion.
Closes gh-3295
Closes gh-3297
Update `ApplicationPidFileWriter` to support a 'fail on write error'
properties which allows the user to exit the application if the PID
file cannot be written.
This commit also deprecates `spring.pidfile` in favor of
`spring.pid.file` so that the new property can be added without overlap.
Fixes gh-2764
This commit adds support for automatically configuring Spring Session.
In a web application when both Spring Session and Spring Data Redis
are on the classpath, Spring Session's Redis Http Session support
will be auto-configured. The max inactive interval for Redis-backed
sessions can be configured via the environment using the existing
server.session-timeout property.
Closes gh-2318
Migrate `spring.view.prefix` and `spring.view.suffix` to
`spring.mvc.view.prefix` and `spring.mvc.view.suffix` respectively. The
former properties are still handled in a backward compatible way and are
defined as deprecated in the meta-data.
Closes gh-3250
Improve SpringApplicationAdminMXBean to expose additional information:
* Whether the application uses an embedded container
* The properties exposed by the `Environment`
This allows to know if the application is web-based and the HTTP port
on which it is running.
Closes gh-3067
Previously, the actual HTTP port on which a web application is running on
was only exposed in tests. This commit makes sure to provide that feature
regardless of the environment so that applications can know on which port
they are actually running on.
If there are several containers, each is exposed via the namespace of
their respective application context.
Closes gh-3259
Add a new `spring.mvc.async.request-timeout` property which can be used
to configure AsyncSupportConfigurer.setDefaultTimeout(..).
Fixes gh-2900
Closes gh-3236
for users to get started. It also makes it more flexible if different
aggregation keys are needed depending on the environment. The most
important new feature is the
spring.metrics.export.redis.aggregateKeyPattern configuration, which
fits the *.redis.key and prefix defaults. The aggregate reader uses
a prefix based on the key by default, with a naming convention that
the key starts with "keys.".
Update the Maven and Gradle repackage tasks so that the embedded
startup script is no longer included by default. This change is
primarily due to the `cf` command line not currently accepting
the unusual jar format.
Fixes gh-3045
Users can add @ExportMetric[Reader,Writer] to readers and writers that
they want to participate in the default exporter. There is also still an
@ActuatorMetricWriter that is used for the legacy (non-Java8) Gauge and
CounterServices.
The redis export and aggregate use case is a lot nicer with this
shared data between the two component types.
Also made MetricExportProperties itself a Trigger (so the default
delay etc. can be configured via spring.metrics.export.*).
Remove `spring.cache.config` as it is too generic and does not express
enough what is configured. This property is replaced by cache library
specific properties, that is `spring.cache.ehcache.config`,
`spring.cache.hazelcast.config`, `spring.cache.infinispan.config` and
`spring.cache.jcache.config`.
See gh-2633
Allow SSL to be configured via standard configuration as well as the
requestedHeartbeat. Switch to RabbitConnectionFactoryBean.
Closes gh-2655, gh-2676
User can enable OAuth2 SSO by declaring the intent (@EnableOAuth2Sso)
and also configuring the client properties (spring.oauth2.client.*).
The spring.oauth2.sso.* are only needed to change the path for the
login (defaults to /login) - any other security configuration for the
protected resources can be added in a WebSecurityConfigurerAdapter
which carries the @EnableOAuth2Sso annotation.
- Apply project’s code formatting and conventions
- Don’t use the IO and worker thread configuration when creating the
worker for the AccessLogReceiver. The IO and worker thread
configuration is for HTTP request processing and a worker in its
default configuration should be sufficient for the access log
receiver.
- Don’t use a temporary directory as the default for the access log
directory. A temporary directory makes (some) sense for Tomcat as it
requires a directory for its basedir. Undertow has no such
requirement and using a temporary directory makes it hard to locate
the logs. The default has been updated to a directory named logs,
created in the current working directory.
- Document the new properties in the application properties appendix
Closes gh-3014
Allow the display-name of the application to be customized when deployed
in an embedded container via the `server.display-name` property.
Closes gh-2600
This commit adds CORS support to the Actuator’s MVC endpoints. CORS
support is disabled by default and is only enabled once the
endpoints.cors.allowed-origins property has been set.
The new properties to control the endpoints’ CORS configuration are:
endpoints.cors.allow-credentials
endpoints.cors.allowed-origins
endpoints.cors.allowed-methods
endpoints.cors.allowed-headers
endpoints.cors.exposed-headers
The changes to enable Jolokia-specific CORS support (57a51ed) have been
reverted as part of this commit. This provides a consistent approach
to CORS configuration across all endpoints, rather than Jolokia using
its own configuration.
See gh-1987
Closes gh-2936
Different physical sources for the same logical metric just need to
publish them with a period-separated prefix, and this reader will
aggregate (by truncating the metric names, dropping the prefix).
Very useful (for instance) if multiple application instances are
feeding to a central (e.g. redis) repository and you want to
display the results. Useful in conjunction with a
MetricReaderPublicMetrics for hooking up to the /metrics endpoint.
This seems pretty efficient (approx 12M write/s as opposed to 2M with
the DefaultCounterService). N.B. there is no need to change most of
the rest of the metrics stuff because metrics are write-often, read-
seldom, so we don't need high performance reads as much.
The Spring Integration configuration and Dropwizard support has changed
a bit. Functionally very similar and probably opaque to users, but now
the messaging operates as an Exporter on a @Scheduled method, and
Dropwizard is a replacement [Gauge,Counter]Service.
Metrics are all
collected live in-memory (and can be very fast with Java 8), buffered
there and shipped out to a MessageChannel (if one exists with id
"metricsChannel") in a background thread.
We can still use Java 8 library APIs (like LongAdder) but to compile
to java 7 compatible byte code we have to forgo the use of lambdas :-(
and shorthand generics (<>).
Fixes gh-2682, fixes gh-2513 (for Java 8 and Dropwizard users).
Some of the features of the launch.script were not exposed for users
to be able to control at runtime. It now accepts things like
PID_FOLDER and LOG_FOLDER as environment variables, and also adopts
a clear naming convention where only the inputs are UPPER_CASE.
For reasons that I don’t understand, Maven has decided to stop running
the javadoc:jar task as part of the package phase. It appears to be
related to the addition of the build-helper plugin in
spring-boot-dependencies. Binding javadoc:jar to the prepare-package
phase convinces Maven to run it, apparently without any unwanted side
effects.
Previously, the CLI’s dependency management used proprietary Properties
file-based metadata to configure its dependency management. Since
spring-boot-gradle-plugin’s move to using the separate dependency
management plugin the CLI was the only user of this format.
This commit updates the CLI to use Maven boms to configure its
dependency management. By default it uses the spring-boot-dependencies
bom. This configuration can be augmented and overridden using the new
@DependencyManagementBom annotation which replaces @GrabMetadata.
Closes gh-2688
Closes gh-2439
This reverts commit b1c0a7cda4.
The plugin publishing process has moved to a new plugin-based approach
that brings with it some significant limitations:
- There's no staging to allow the promotion of good release builds
- There's no easy way to upload an existing artifact
- There's no control over the published pom.
The risk brought by these limitations, particularly the first, are
too great so we will no be publishing the Boot plugin to the Portal
until they're resolved.
Changing the plugin's ID was a breaking change that would require
users to do some work when they upgrade to Boot 1.3. The ID of the
plugin was changed purely so that it met the Portal's requirements.
Given that the plugin will not be published to the Portal for the
foreseaable future there's no need for us to inflict a breaking change
on people when there will be no benefit.
See gh-1567
Add an entry for `flyway.*` to make it more explicit that any public
property of the auto-configured `Flyway` object can be set via the
`flyway` prefix.
Closes gh-2667
- Nest the configuration class in HealthIndicatorAutoConfiguration,
bringing it into line with the other health indicator configuration
classes
- Include the statistics from the response in the health’s details
- Map YELLOW to UP rather than UNKNOWN as it indicates that the cluster
is running but that “the primary shard is allocated but replicas are
not” [1]. The details can be used to determine the precise state of
the cluster.
- Add a property to configure the time that the health indicator will
wait to receive a response from the cluster
- Document the configuration properties
- Update the tests to cover the updated functionality
See gh-2399
[1] http://www.elastic.co/guide/en/elasticsearch/reference/1.x/cluster-health.html
This commit adds support for configuring an ObjectMapper's
serialization inclusion using the environment via the
spring.jackson.serialization-inclusion property. The property's value
should be one of the values on the JsonInclude.Include enumeration.
Relaxed binding of the property value to the enum is supported. For
example:
spring.jackson.serialization-inclusion: non_null
Closes gh-2532
Initial update to the documentation to mention how a 3rd party starter
should be named. The current doc sends a completely inconsistent message
to what we actually intend.
See gh-2537
Gradle’s plugin portal requires each plugin’s ID to be in a namespace.
Our existing ID, spring-boot, does not meet this requirement. This
commit changes the plugin’s ID to org.springframework.boot.spring-boot.
Note that, as is recommended [1], the plugin’s ID does not include
“gradle”.
See gh-1567
[1] http://plugins.gradle.org/submit
This commit replaces Spring Boot's basic dependency management support
with separate dependency management plugin. This has a number of
benefits including:
1. A Maven bom can be used rather than a custom properties file
2. Dependency management is applied transitively rather than only to
direct dependencies
3. Exclusions are applied as they would be in Maven
4. Gradle-generated poms are automatically configured with the
appropriate dependency management
Closes gh-2133
Previously, only a handful of properties could be set when
auto-configuring an Elasticsearch client. This commit introduces support
for configuring arbitrary properties using the
spring.data.elasticsearch.properties prefix. For example,
client.transport.sniff can be configured using
spring.data.elasticsearch.properties.client.transport.sniff.
Closes gh-1838
Previously, a TransportClient sniff property could not be configured
while using Spring Boot’s Elasticsearch auto-configuration. This commit
adds a new property, spring.data.elasticsearch.client-transport-sniff,
that can be used to configure the TransportClient while continuing to
use the auto-configuration support.
Closes gh-1838
Add an event that indicates the Spring Application has fully started and
is now ready to service requests. While ContextRefreshEvent provides
such hook for a regular spring application, this dedicated event is
triggered once all callbacks have been processed and right before the
context is returned to the caller. Besides, such event is triggered once
per application, regardless of the number of (child) contexts that could
have been created.
Closes gh-2638
Rename RepositoryRestMvcBootConfiguration to
SpringBootRepositoryRestMvcConfiguration so that it follows the same
naming pattern as other custom Spring Boot configurations.
See gh-2392
- Correct typo (coercable -> coercible)
- Update description to reflect that Spring 4.1.5 supports the
expansion of array properties and and a test that verifies the
behaviour
If an application defines a custom RepositoryRestMvcConfiguration, all
Spring Boot defaults are lots. While this sounds sensible, it can be
confusing as Spring Boot exposes properties (`spring.data.rest.*`) that
are no longer honored.
RepositoryRestMvcBootConfiguration is now public and can be used as an
extension point for those who need to customize the Spring Data REST
configuration and keep boot's specific defaults.
Fixes gh-2392
The Maven plugin allows spring-boot:run to be configured so that
resources are loaded from their output location rather than from
src/main/resources. This commit adds an equivalent configuration
option to the Gradle plugin. To disable source resources from being
added to the classpath in place of those in the output location
the configure the bootRun tasks like this:
bootRun {
addResources = false
}
Closes gh-2431
This commit adds support for configuring the XA DataSource and
ConnectionFactory pools created by Atomikos and Bitronix via the
environment. The property prefixes vary depending on the transaction
manager that’s in use. They are:
Bitronix:
- spring.jta.bitronix.datasource
- spring.jta.bitronix.connectionfactory
Atomikos:
- spring.jta.atomikos.datasource
- spring.jta.atomikos.connectionfactory
The configuration processor has been updated to ignore
javax.jms.XAConnectionFactory and javax.sql.XADataSource as neither of
these types can be created via property binding.
Closes gh-2027
This commit adds support for configuring Log4j 2 with YAML. It also
improves the existing support for configuring Log4j 2 with JSON.
Previously, Log4J2LoggingSystem returned a hard-coded list of standard
config locations that includes both JSON and XML file suffixes. Log4j
2’s support for JSON configuration files requires Jackson’s ObjectMapper
to be on the classpath so, in its absence, the standard config locations
were incorrect.
This commit updates Log4J2LoggingSystem to return an array of standard
config locations based on what’s on the classpath. It also updates the
documentation to describe the additional dependencies that are required
to enable YAML or JSON-based configuration.
Closes gh-2239
If user runs an executable archive then it and its lib directory will be
on the classpath. Entries from loader.path take precedence in a way that
should make sense to users (earlier wins like in CLASSPATH env var).
Also added new integration tests to verify the behaviour (big improvement
on the old ones, which probably aought to be beefed up to the same
standard).
Fixes gh-2314
Previously, the documentation only provided examples of the required
configuration for Maven users. This commit adds equivalent configuration
snippets for those using Gradle. It also removes the recommendation to
override the version of the Servlet API as this is unnecessary. The pom
files for the Jetty 8 and Tomcat 7 samples have also been updated
accordingly.
Closes gh-2346
Add `@WebIntegrationTest` which is similar to `@IntegrationTest` and
`@WebAppConfiguration`. The annotation using Spring's `@BootstrapWith`
annotation rather than `@TestExecutionListeners` which allows it to
work when `@TestExecutionListeners` (even ServletTestExecutionListener)
are declared on the test class.
This annotation is particularly useful for TestNG users that extend
Spring's `AbstractTestNGSpringContextTests` class.
Fixes gh-2299
See gh-1956
See gh-2135
The "Customizing ConfigurableEmbeddedServletContainer directly"
section should use `HttpStatus.NOT_FOUND` and not `HttpStatus.404` in
the sample code.
Fixes gh-2258
Update HypermediaAutoConfiguration to apply the Jackson2HalModule to
the primary ObjectMapper. This restores the behavior of Spring Boot
1.1 where HATEOAS types could be serialized for both `application/json`
and `application/json+hal` content types.
A `spring.hateoas.apply-to-primary-object-mapper` property has also been
provided to opt-out if necessary.
Fixes gh-2147
Actually collection types are not harmonized to their interface
counterpart; this was implemented in the first proposal but wasn't
applied in the final review.
See gh-2206
Previously, no configuration properties were discovered on a class using
lombok instead of regular getters/setters.
This commit adds a support for some of the lombok annotations,
specifically that is @Data, @Getter and @Setter. Provides the same
semantic as what lombok is generating.
Closes gh-2114
Update the file log pattern to write the thread name after the `---`
separator. The allows both file and console logs to be parsed in the
same way.
Fixes gh-2136
Refactor LoggingApplicationListener and LoggingSystem to restore
Spring Boot 1.1 logging behavior. The LOG_FILE and LOG_PATH system
properties are now set before configuring the logger.
The `logging.path` property is now once again optional and will not be
used when `logging.file` is specified. The documentation has also been
updated to reflect the changes.
Fixes gh-2121
Fixes gh-2117
Health indicator configuration keys have moved from the health.* to the
management.health.* namespace. This commit adds an explicit reference
to the previous location.
See gh-2128
Health indicator configuration keys have moved from the health.* to the
management.health.* namespace. This commit makes sure that these are
documented properly in 1.1.x as well.
See gh-2118
Update AbstractEndpoint so that the `enable` property is optional and
when it not specified the `endpoints.enabled` property will be used.
This allows users to switch the way that endpoints are enabled. Rather
than opting-out specific endpoint enablement the `endpoints.enabled`
property can be set to `false` and specific endpoints can be opted-in.
Fixes gh-2102
Add a `spring.mvc.set-ignore-default-model-on-redirect` property to
allow RequestMappingHandlerAdapter.setIgnoreDefaultModelOnRedirect to
be easily customized and change the default value to 'true'.
Fixes gh-2018
In a properties file, a backslash is used as an escape character for
the line terminator sequence to allow values to be split across
multiple lines. When a backslash is used elsewhere they're stripped
out of the property's value.
This commit updates .properties-based examples for configuring
server.tomcat.internal-proxies to escape the backslahes so that they
are retained in the property's value at runtime.
See gh-1989
By default, when /health is accessed anonymously, the details are
stripped, i.e. the response will only indicate UP or DOWN. Furthermore
the response is cached for a configurable period to prevent a denial
of service attack.
This commit adds a configuration property,
endpoints.health.restrict-anonymous-access, that can be set to false
to allow full anonymous access to /health. When full access is
allowed, the details will be included in the response and the response
will not be cached.
Closes gh-1977
Update MongoDataAutoConfiguration to provide easier configuration of
CustomConversions, the MappingMongoConverter, MongoMappingContext
and an authentication database.
Fixes gh-1619
Fixes gh-1730
Fixes a couple of typos in the documentation:
* `x-forwarded-protocol` is not the standard name for this header
* `require_https` is not an existing property, but rather `require_ssl`
The http.mappers.* configuration properties assumed that the mapping
was JSON (on of the property names was jsonPrettyPrint) and also only
exposed a small subset of the configuration options supported by
Jackson (and GSON). The property names implied that it would configure
all HTTP mapping, however it was ignored by GsonAutoConfiguration.
This commit deprecates the support for http.mappers.* in favour of
configuring Jackson or Gson instead. Jackson can be configured
declaratively using the spring.jackson.* properties or programtically.
Gson can be configured programatically by using a GsonBuilder to
create a Gson instance with the desired configuration.
gh-1946 has been opened to add support for declarative configuration
of Gson.
Closes gh-1945
Previously, configuration of a ServletContext init parameter required
the use of a ServletContextInitializer bean. This commmit adds
support for declarative configuration via the environment using
server.context_parameters.<name>=<value>.
Closes gh-1791
If a Gradle build is using the Spring Boot Gradle plugin's support for
declaring dependencies without versions then they will be unable to
publish Maven artifacts from the build as the Gradle-generated pom
will fail to validate. This is because Gradle doesn't apply the
Boot-provided dependency versions to the dependencies in the generated
pom.
This can be addressed by configuring Gradle to generate a pom that
either imports spring-boot-dependencies into its dependency management
or that uses spring-boot-starter-parent as its parent. This commit
updates the documentation to document the need for this configuration
and to provide examples of how to do so.
Closes gh-1806
Traditionally, a @ServerEndpoint-annotated bean is found by a servlet
container initialiser, however Boot does not run servlet container
initialisers when an embedded container is being used. To be able to use
@ServerEndpoint in a Boot app that uses embedded Tomcat a
ServerEndpointExporter bean must be declared.
This commit updates the documentation to describe this requirement and
also updates the WebSockets sample to illustrate the use of
ServerEndpointExporter. The version of Spring Framework has been updated
to 4.0.8.BUILD-SNAPSHOT. This picks up the fix for SPR-12340.
Closes gh-1722
Change the default value of spring.datasource.jmx-enabled to false
to prevent InstanceAlreadyExistsException problems when using the
Spring Test Framework.
Fixes gh-1590
Update the auto-configured PersistenceExceptionTranslationPostProcessor
to proxy target classes as well as interfaces. Also provide a config
property to disable registration all together.
Fixes gh-1844
Change the pidfile property from `spring.application.pidfile` to
`spring.pidfile` (to save confusion with SpringApplication properties).
Also added documentation and meta-data information.
See gh-1579
Disable JTA auto-configuration altogether with a simple property. This
can be useful if the environment is JTA capable but the application does
not require it.
Fixes gh-1457
Override the default StringHttpMessageConverter provided by the standard
Spring MVC configuration so that is uses UTF-8 instead of the aging
default of the servlet spec (that is ISO-8859-1)
Fixes gh-1800
This commit reworks a7e1ec8 to fix the build failure and update the
documentation regarding default maven filtering option with
spring-boot-starter-parent
Fixes gh-1199
Add an appendix to the reference documentation describing the format
of configuration meta-data and how the annotation processor can be used.
Closes gh-1001
Previously, Spring Security's filter had no configured order. Due to
the use of AnnotationAwareOrderComparater this meant that its order
defaulted to LOWEST_PRECEDENCE. This meant that a user had to declare
a FilterRegistrationBean for the filter and explicitly set its order
if they want another filter to run after Spring Security's.
This commit updates the security auto-configuration to assign a
default order of zero to Spring Security's filter, allowing filters
to be easily configured to run before it or after it. This default
value can overridden using the server.filter-order property. The
default order is also exposed as a constant on SecurityProperties,
allowing it to be referenced from other filter declarations.
Closes gh-1640
Previously, Bitronix's server ID was hard-coded to be
spring-boot-jta-bitronix. This created the possibility of multiple
transaction managers performing recovery on each other's behalf as
they would be unable to identify their own XIDs due to the common
server ID.
This commit reinstates the default (which is the IP address of the
machine on which Bitronix is running), and introduces a new
property, spring.jta.transaction-manager-id, that can be used to
configure the id for both Atomikos and Bitronix. A cautionary note
has also been added to the documentation for Atomikos and Bitronix
explaining the need to configure this property.
Closes gh-1548
Points to note for authors:
* Nesting "*" in `literals` does not behave like Markdown - you have to
escape the asterisk (e.g. `foo/\*`)
* Quote ligatures (why we had to use those I don't really know) are
different in asciidoctor 1.5 ('`foo`' instead of ``foo'')
Merge branch '1.1.x'
Conflicts:
spring-boot-docs/src/main/asciidoc/production-ready-features.adoc
spring-boot-docs/src/main/asciidoc/spring-boot-features.adoc
- Supply auto-configuration for the new indicator
- As suggested in the pull request, include the free disk space and
configured threshold in the health details
- Update the documentation to describe the indicator and its
two configuration settings
- Use @ConfigurationProperties to bind the indicator's configuration.
This should make the changes sympathetic to the work being done
to automate the configuration properties documentation
Closes gh-1297
This commit introduces support for Jackson based XML serialization, using the
new MappingJackson2XmlHttpMessageConverter provided by Spring Framework
4.1. It is automatically activated when Jackson XML extension is detected on the
classpath.
Jackson2ObjectMapperBuilder is now used to create ObjectMapper and XmlMapper
instances with the following customized properties:
- MapperFeature.DEFAULT_VIEW_INCLUSION is disabled
- DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES is disabled
JodaModuleAutoConfiguration and Jsr310ModuleAutoConfiguration have been removed
since their behaviors are now handled directly by the ObjectMapper builder.
In addition to the existing @Bean of type ObjectMapper support, it is now
possible to customize Jackson based serialization properties by declaring
a @Bean of type Jackson2ObjectMapperBuilder.
Fixes gh-1237
Fixes gh-1580
Fixes gh-1644
In some scenarios, the ErrorPageFilter will want to forward the request
to an error page but the response has already been committed. One common
cause of this is when the filter’s running on WAS. WAS calls
flushBuffer() (which commits the response), upon a clean exit from a
servlet’s service method.
Previously, the filter would attempt the forward, even if the response
was committed. This would result in an IllegalStateException and a
possibly incomplete response that may also have an incorrect status
code.
This commit updates the ErrorPageFilter to check to see if the response
has already been committed before it attempts to forward the request to
the error page. If the response has already been committed, the filter
logs an error and allows the container’s normal handling to kick in.
This prevents an IllegalStateException from being thrown.
This commit also updates the response wrapper to keep track of when
sendError has been called. Now, when flushBuffer is called, if
sendError has been called, the wrapper calls sendError on the wrapped
response. This prevents the wrapper from suppressing an error when the
response is committed before the request handling returns to the error
page filter.
Closes gh-1575
Corrected the documentation to refer to file as tests.groovy, rather
than test.groovy. Updated cope snippet as tests.groovy should expect
"Hello World!" rather than "Hello World".
Closes gh-1593
Enhance JacksonAutoConfiguration to configure features on the
ObjectMapper it creates based on the following configuration
properties:
spring.jackson.deserialization.* = true|false
spring.jackson.generator.* = true|false
spring.jackson.mapper.* = true|false
spring.jackson.parser.* = true|false
spring.jackson.serialization.* = true|false
The final part of each property name maps onto an enum. The enums are:
deserialization: com.fasterxml.jackson.databind.DeserializationFeature
generator: com.fasterxml.jackson.core.JsonGenerator.Feature
mapper: com.fasterxml.jackson.databind.MapperFeature
parser: com.fasterxml.jackson.core.JsonParser.Feature
serialization: com.fasterxml.jackson.databind.SerializationFeature
Closes gh-1227
Spring Data Redis 1.4.0 introduced Redis Sentinel support. When
specified, RedisConnectionFactory uses the Sentinel configuration to
determine the current master.
Sentinel configuration can be specified using two new properties:
spring.redis.sentinel.master and spring.redis.sentinel.nodes.
For example:
spring.redis.sentinel.master=mymaster # name of redis server
spring.redis.sentinel.nodes=127.0.0.1:26379,127.0.0.1:26380
Alternatively, a bean of type RedisSentinelConfiguration can be declared
and it will be used to configure the connection factory.
Note: At this time, Sentinel support is only available for Jedis
Closes gh-1337
This commit deprecates the proprietary EnableRabbitMessaging annotation
in favour of the standard @EnableRabbit introduced as of Spring Rabbit
1.4.
Fixes gh-1494
This commit improves DataSourceMetadata to expose the validation
query. This can be used by DataSourceHealthIndicator as the query
to use instead of "guessing" which query could be applied according
to the database type.
Fixes gh-1282
This commit adds an abstraction that provides a standard manner to
retrieve various metadata that are shared by most data sources.
DataSourceMetadata is implemented by the three data source
implementations that boot supports out-of-the-box: Tomcat, Hikari and
Commons dbcp.
This abstraction is used to provide two additional metrics per data
source defined in the application: the number of allocated
connection(s) (.active) and the current usage of the connection pool
(.usage).
All such metrics share the 'datasource.' prefix. The prefix is further
qualified for each data source:
* If the data source is the primary data source (that is either the
only available data source or the one flagged @Primary amongst the
existing ones), the prefix is "datasource.primary"
* If the data source bean name ends with "dataSource", the prefix is
the name of the bean without it (i.e. batchDataSource becomes batch)
* In all other cases, the name of the bean is used
It is possible to override part or all of those defaults by
registering a bean with a customized version of
DataSourcePublicMetrics.
Additional DataSourceMetadata implementations for other data source
types can be added very easily, check
DataourceMetadataProvidersConfiguration for more details.
Fixes gh-1013
This commit binds RepositoryRestConfiguration to the spring.data.rest
prefix so that any of its property can be customized through the
environment.
If a RepositoryRestMvcConfiguration is defined in the context, those
customization do not apply, as it was the case before.
Fixes gh-1171
Add `spring.datasource.jndi-name` property to allow a DataSource to be
looked up from JNDI as an alternative to defining a URL connection.
Fixes gh-989
Rework flexible PublicMetrics registration introduced in 2be6b3e4 to
restore compatibility with v1.1 VanillaPublicMetrics. The new
MetricReaderPublicMetrics class now exposes metrics from a MetricReader
and VanillaPublicMetrics is deprecated. The MetricsEndpoint can now
exposes a collection of PublicMetric interface directly.
See gh-1094
This commit fixes some inconsistent or outdated keys in the
documentation. More specifically:
* allowSessionOverride is no longer a template parameter
* templateEncoding has been renamed to charSet
* Groovy templates do not have the same configuration hierarchy, hence
they don't share all settings
* spring.data.elasticsearch.local does not seem to exist
* flyway prefix and suffix should be sqlMigrationPrefix and suffix
* spring.rabbitmq.virtualHost had a typo
* endpoints.error.path is not a valid property
* shell.command-path-patterns had a typo
* spring.datasource.max-wait had a typo
Fixes gh-1226
This commit permits the use of several PublicMetrics instances by
default. Previously, only one PublicMetrics service could be specified
and a user configuration would remove all the defaulting.
VanillaPublicMetrics now takes a collection of PublicMetrics and
invokes them in sequence to build the final collection of metrics.
The system-related metrics have been moved to SystemPublicMetrics and
are registered by default.
Also updated the documentation to mention this feature and how it
could be fully overridden.
Fixes gh-1094
Update the executable JAR code to automatically unpack any entries
which include an entry comment starting `UNPACK:` to the temp folder.
The existing Maven and Gradle plugins have been updated with new
configuration options and the `spring-boot-tools` project has been
updated to write the appropriate entry comment based on a flag passed
in via the `Library` class.
This support has been added to allow libraries such a JRuby (which
assumes that `jruby-complete.jar` is always accessible as file) to work
with Spring Boot executable jars.
Fixes gh-1070
Add a Library class update the LibraryCallback interface and
implementations to use it. This change is in preparation for
an addition `unpack` flag that will be required to allow the
automatic unpacking of certain nested jars.
See gh-1070
Prior to this commit it was not safe to start several contexts
using the HornetQAutoConfiguration in the same VM. Each context
was trying to start their own HornetQ embedded broker by default but
only the first was really starting. Worse, the various InVM connection
factories were all silently connecting to the first broker.
This commit introduces a new "serverId" property that is an auto-
incremented integer by default. This identifies the server to connect
to and allows each context to start its own embedded broker in total
isolation of other contexts.
This commits makes it possible for a context to disable its own
embedded broker and connect to an existing one, potentially started
by another context.
Fixes gh-1063
Simplify the exclusion logic used in Gradle by implementing implicit
exclusions rather than trying to detect transitive excludes.
This commit reverts much of the code originally included to fix gh-1047
which adds far too much complexity to the build and still doesn't solve
the underlying issue.
Fixes gh-1103
The lists are comma separated. In addition, user can add prefixes
"+" or "-", to signal that those values should be removed from the
default list, not added to a fresh one. E.g.
$ spring jar app.jar --include lib/*.jar,-static/** --exclude -**/*.jar
to include a jar file specifically, and make sure it is not excluded,
and additionally not include the static/** resources that would otherwise
be included in the defaults. As soon as "+" or "-" prefixes are detected
the default entries are all added (except the ones exlcuded with "-").
Fixes gh-1090
- Log to the correct class
- Set Auto-configure after Thymeleaf hint on main class instead of
internal static class
- Use 'thymeleafViewResolver' bean name instead of class for
conditional bean checks
- Fix class name in properties documentation
Fixes gh-1052
I decided to go with both approaches (make the autoconfig for
repositories @ConditionalOnMissingBean(RepositoryFactoryBeanSupport),
so the first one wins; and also make them conditional on
spring.data.*.repositories.enabled=true. The ordering problem
is still there really (it's not defined which repositories will
be created by the autoconfig), so if a user is going to have
2 repository implementations on the classpath, he is going to
have to either choose one to disable, or manualy @Enable* the
other one.
Fixes gh-1042
Update Spring Mobile support with the following changes:
- Apply source formatting
- User lowercase property prefixes
- Use dashed notation when accessing properties
- Inline some constants
See gh-1049
@PropertySources *can* and should be added in the slot
after the application.properties (code that is part of the
application should have lower precedence than external
configuration).
Fixes gh-1044
They all want to create an MBeanServer and when that happens
user sees no MBeans, or sometimes just one set (Spring Core,
Spring Integration or Spring Boot). To harmonise them we
create a @Bean of type MBeanServer and link to it in the
other autoconfigs
Fixes gh-1046
This commit changes the default behavior of the HornetQ auto
configuration. Prior to this commit, an embedded broker was only
started when it was requested explicitly by a configuration option.
This is inconsistent with the ActiveMQ support and boot favors the
easiest route. If the necessary classes are available, HornetQ is
embedded in the application by default.
Fixes gh-1029
The list continuation character '+' can be used to prevent a blank
line from ending a list, thereby allowing code blocks to be included
in a list. See "Complex content in outline lists" [1] for more
details.
[1] http://asciidoctor.org/docs/asciidoc-syntax-quick-reference/#listsFixes#1025
Not having READMEs in github is a mistake IMO, so here's one
restored and with a link to the docs. Docs also updated to
more accurately reflect the location of the actuator features
in implementation.
See https://github.com/spring-guides/gs-actuator-service/pull/7
for the Getting started guide change
Fixes gh-1014
Schema initialization now happens in @PostConstruct (effectively)
whether it is via the Hibernate EntityManagerFactory or the
Boot DataSourceInitialization (in addition or instead). The data.sql
script if it exists is still executed on an event fired from the
other places, so those tests are passing.
Flyway and liquibase have bean factory post processors (like
the one they use to order the audit aspect in Spring Data) that
enforce a dependency on those components from the EntityManagerFactory.
So Hibernate validation is still happy (and there are 2 tests to
prove it now as well).
Fixes gh-1022
The maven plugin now forks a process to start the application so
mvnDebug cannot be used anymore. This commit replaces the reference
of mvnDebug to a link to an example of the maven plugin.
Fixes gh-992
Added 2 new spring.datasource.* properties ("data" like
"schema", and "deferDdl" like the "spring.jpa.hibernate.*"
flag). The SQL scripts are then run separately and the "data"
ones are triggered by a new DataSourceInitializedEvent,
which is also published by the Hibernate DDL schema export.
Fixes gh-1006
Provide auto-configuration support for HornetQ JMS broker, along with
an additional starter POM.
The connection factory connects to a broker available on the local
machine by default. A configuration switch allows to enable an embedded
mode that starts HornetQ as part of the application.
In such a mode, the spring.hornetq.embedded.* properties provide
additional options to configure the embedded broker. In particular,
message persistence and data directory locations can be specified. It is
also possible to define the queue(s) and topic(s) to create on startup.
Fixes: gh-765
Update JasperInitializerLifecycleListener to call JasperInitializer as
a ServletContainerInitializer (not a ServletContextInitializer).
Fixes gh-962
See gh-919
This commit clarifies how @IntegrationTest can be used as an
alternative of starting the (web) application prior to running the
tests suite.
Fixes gh-667
Refactor and rework several areas of the Gradle plugin:
- Refactor package structure into functional areas and configure each
area separately via a new PluginFeatures interface.
- Convert BootRunTask to extend RunTask rather than attempting to
find existing RunTasks.
- Simplify agent integration by no longer needing specific BootRunTask
code.
- Update the repackage task to consider the `mainClassName` property
in addition to `springBoot.mainClass`.
- Automatically set `mainClassName` when calling `run` or `runBoot`
from `springBoot.mainClass` if there is one.
- Ensure that explicitly defined `main` options on JavaExec tasks always
take precedence.
Fixes gh-547, gh-820, gh-886, gh-912
Add a new maven project containing a versions.properties file and
an effective POM. Rework existing projects to use the versions
artifacts.
Partially reverts 307fbba9e4
Fixes gh-913
Since Flyway has bean properties (with getters and setters)
it can be used to bin directly to the Environment (instead of
copying all the properties into FlywayProperties).
Fixes gh-806
Add support for a new annotation, @GrabMetadata, that can be used
to provide the coordinates of one or more properties files, such as
the one published by Spring IO Platform, as a source of dependency
metadata. For example:
@GrabMetadata("com.example:metadata:1.0.0")
The referenced properties files must be in the format
group:module=version.
Limitations:
- Only a single @GrabMetadata annotation is supported
- The referenced properties file must be accessible in one of the
default repositories, i.e. it cannot be accessed in a repository
that's added using @GrabResolver
Closes#814
A callback is added in autoconfig, so that if users inject the EntityManagerFactoryBuilder
into their app and use it to create multiple EntityManagerFactories, they all get the
same deferred DDL behaviour. The deferred DDL can also be disabled by setting
spring.jpa.hibernate.deferDdl=true.
Fixes gh-894
Since ActiveMQ 5.8.0, the modules structure has been revisited and
activemq-core no longer exists. The activemq-broker is required to
create an embedded broker. Since Boot creates such broker by default
if ConnectionFactory is present, a condition has been added to do so
only when the necessary classes are present in the classpath.
The default embedded broker is now configured to disable message
persistence altogether as this requires an extra jar since 5.8.0, i.e.
activemq-kahadb-store.
Split the ActiveMQ auto configuration from the JmsTemplate auto
configuration so these are totally independent.
ActiveMQAutoConfiguration has been created to detect and configure
the ActiveMQ broker if necessary.
The brokerUrl parameter was ignored as long as the inMemory parameter
was true. The actual brokerUrl to use is now determined by the user
defined values of those parameters: if the brokerUrl is set, it is always
used. If no brokerUrl is set, the value of inMemory determines if an
embedded broker should be used (true) or a tcp connection to an
existing local broker (false).
JmsTemplateAutoConfiguration now creates a JmsTemplate only if a
ConnectionFactory is available.
Fixes gh-872, gh-882, gh-883
Adds JpaProperties to bind to spring.jpa.* (making those
properties easier to reason about and visible in the
/configprops endpoint).
Also allows easy configuration of multiple EntityManagerFactories via new
EntityManagerFactoryBuilder. JpaBaseConfiguration has a @Bean of that type
so users can inject it to create new or additional EntityManagerFactories.
This also simplifies the Hibernate autoconfiguration.
Also renames the DataSourceFactory to DataSourceBuilder (since that's what it
is).
Add a `versionManagement` gradle configuration which can be used to
provide alternative version meta-data. Primarily added so that the
Spring IO platform can provide version overrides without causing a
cyclic build dependency.
Fixes gh-750
For the convenience of users who want to selectively override the
access rules in an application without taking complete control of the
security configuration we now have some constants:
* SecurityProperties.ACCESS_OVERRIDE_ORDER for overriding just the
application endpoint access rules
* ManagementServerProperties.ACCESS_OVERRIDE_ORDER for overriding the
application endpoint and management endpoint access rules
Fixes gh-803
This commit harmonizes the dependency management of internal modules
so that versions can be omitted everywhere. Update the maven coordinates
to provide the full groupId for consistency
Previous to this commit, the remote shell security configuration
described that a default password will be generated with no extra
configuration. Actually, when Spring Security is configured for the
application, the remote shell reuses that configuration by default.
It turns out that the default log message is confusing as it was
referring to "application endpoints". Updated that log to a more
generic log message and updated doc accordingly.
Fixes gh-779
Commit e26e06d5dd broke the full build as the generated zip file for
the size is not generated. Actually, the site plugin has a jar goal that
is exactly meant for what we need to do.
This commit removes the use of the assembly plugin and invokes the
jar goal of the site plugin when the full profile is enabled.
Relates to #749
This commit adds the generated site for the maven plugin alongside
the developer guide and javadoc. The maven plugin is available in
the "/maven-plugin" context.
The advanced information described in the developer guide have
been migrated to the plugin site as most the information is taken
from the code itself, which avoids duplication.
Fixes#749
If Liquibase is on the classpath it will fire up on startup. Various
config options are available (as well as the option to disable it).
Liquibase uses a YAML format for changes (in classpath:db/changelog).
This commit adds auto-configuration and a starter,
spring-boot-starter-freemarker, for using FreeMarker view templates in
a web application.
A new abstraction, TemplateAvailabilityProvider, has been introduced.
This decouples ErrorMvcAutoConfiguration from the various view
technologies that Spring Boot now supports, allowing it to determine
when a custom error template is provided without knowing the details of
each view technology.
Closes#679
Prior to this commit, a JmsTemplate bean created automatically by Boot
had its "pubSubDomain" flag enabled. It's far more usual to fallback on
queue rather than topic.
This commit flips the default value of the configuration property.
Update reference documentation to include a note explaining that
"blessed" versions a chosen based on the gradle plugin version, and
that builds are repeatable.
Fixes gh-619
Update the Cloud Foundry section of the reference documentation to:
- Reflect the fact that the Cloud Foundry v6 CLI no longer has an
interactive mode for application push.
- Update some of the CLI output.
- Change links to point to open-source CF docs instead of Pivotal
commercial docs.
- Add a few links.
Fixes gh-718
If the user sets spring.mvc.locale and doesn't provide a @Bean
of type LocaleResolver then a FixedLocaleResolver will be provided.
Fixes gh-697, fixes gh-669
I preferred /etc/bash_completion.d (since it mirrors the actual
preferred deployment of the scripts on my OS). Maybe the MacBoys
have a different point of view? Anyway the docs now point to the
actual script location.
Fixes gh-651
A more thorough check is needed to avoid the false assumption
that the DataSource is embedded just because an embedded database
is on the classpath. You really have to try and look in the connection
metadata, so that's what we now do.
Fixes gh-621, fixes gh-373
Andy Wilkinson
Dave Syer
Stephane Nicoll
izeye
Rob Winch
Phillip Webb
drumonii
Lucas Saldanha
Sebastien Deleuze
Andrew Landsverk
Ivan Sopov
Rob Baily
Melvin Kicchi
Marten Deinum
Eddú Meléndez
Spring Buildmaster
Matt Benson
Brian Clozel
Ralph Schaer
Johannes Stelzer
Geoffrey Chandler
cohee016
Tomasz Przybyła
Artur Mkrtchyan
John Tims
ceilfors
Josh Thornhill
Phil Parker
Joe Kutner
yinheli
Kamil Szymanski
Marcin Zajączkowski
Marcel Overdijk
Eric Dahl
Maciej Walkowiak
StevenGeens
Russell Allen
Nils Breunese
pauldub
Hendy Irawan
kakawait
Sjoerd Mulder
Andrea Vacondio
Henryk Konsek
Daniel Fullarton
Marcel Overdijk
N Jain
Stephane Nicoll
Vladimir Tsanev
Christoph Strobl
Christoph Frick
David Liu
Dave Syer
Raphael von der Grün
Phillip Webb
Andy Wilkinson
ddebree
Radesh Rao
Toshiaki Maki
Iván López
Tadaya Tsuyukubo
Shinobu Aoki
Roy Clarkson
Christian Dupuis
Craig Walls
bjornerik
Brian Clozel
Lukasz Kryger
Ger-Jan te Dorsthorst
Josh Long
Scott Frederick
Hugo Flambo
Jakub Kubrynski
Verrol L. Adams
Lukasz Kryger